Refractory metal alloy of molybdenum, tantalum products.
Induction hardened hard chrome plated rods with Ck45 quality, excellent surface roughness, optimum corrosion resistance and high impact resistance for hydraulic-pneumatic cylinders and other applications. Technical Specifications Steel Grade:C45E (EN 10083) Diameter Range:12 to 120 mm Tolerance Class:ISO f7 Roundness:Diameter tolerance / 2 Standard Lengths:For 60 mm: 5600 - 6200 mm,For 60 mm: 5800 - 6200 mm Upon request: special lengths on all diameters Surface Roughness:Ra max. 0.2 m Surface Hardness:min 55 HRC Hardened Layer Depth:2.0 mm Chrome Layer Thickness: 20 mm: min. 15 m, 20 mm: min. 20 m Chrome Layer Hardness:min. 900 HV (0,1)
English name: Vanadium Nitrogen Alloy Molecular formula: VN12VN14 VN16 CAS NO.: 24646-85-3 Boiling point:2360 Shape: small lump Grade Standard: Industrial Grade Application: Vanadium nitrogen alloy can be used in structural steel, tool steel, pipe steel, steel bar and cast iron. The application of V-N alloy in high strength low alloy steel can effectively carry out v and N microalloying at the same time, promote the precipitation of carbon, V and N compounds in the steel, and play a more effective role in precipitation strengthening and grain refinement. The addition of VN to steel can improve the comprehensive mechanical properties of steel, such as strength, toughness, ductility and thermal fatigue resistance, and make the steel have good weldability. The yield of vanadium and nitrogen is stable and the fluctuation of steel properties is reduced. It is easy to use and less loss. High strength moisture-proof packaging, can be directly into the furnace. Packing: Big Bag
English name: Vanadium Pentoxide (Flake) Molecular formula: V2O5 CAS NO.:1314-62-1 Density:3.357g/cm3 Melting point:690 Boiling point:1750 Aqueous solubility:1g/125mL Appearance : gray black flake Application: Vanadium flakes are mainly used in the iron and steel industry. By refining the structure and grains of steel, the grain coarsening temperature is increased, thereby increasing the strength, toughness and wear resistance of the steel. In addition, vanadium flakes are excellent in titanium alloy Improved effect, used as an additive in the aerospace field.
English name: Ferro Vanadium Molecular formula: FeV80 CAS NO.: 12604-58-9 Boiling point:3337 Melting Point:1887 Shape: small lump Purity:FeV50-A/B/C, FeV80-A/B/C Grade Standard: Industrial Grade Application: Ferrous vanadium is a ferroalloy composed of vanadium and iron, which is mainly used as an alloy additive in steelmaking. The vanadium in ferrovanadium can improve the strength, toughness, ductility and heat resistance of steel, and improve the cutting performance of steel. High vanadium ferro-vanadium is also used as an additive in nonferrous alloys. Packing: 250KG/DRUM or Big Bag
We supply many kinds of chemical raw material, such as detergent raw material, organic material, fertilizer, metal and so on.
For detailed pricing and further information, please contact us. Please note that at HYZH ENERGY, customer satisfaction is of utmost importance to us, and we are committed to providing you with the highest quality products and services. We are eager to work with you and help elevate your business to new heights. Best Regards, Fethi Ipek
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of Sintered NdFeB Magnet : 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications. Advantages of Flexible Magnet: Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes. Technical Data of Flexible Magnet: Shapes: Rolls or Sheeting & Strips Magnetization: Axially Magnetized Br: 1,600 Gauss BHmax:0.60 MGOe Hc: 1,370 Oersted's Max Operating Temperature:212F/100 Density(lb/in3): 0.133
Anping Jugu Wire Mesh Co.,Ltd.,especially manufacture High Ribbed Formwork,it is made from hot-dipped galvanized steel sheets. Because of its meshes and U patterns, it has better anti-stress capability and forming flexibility than normal metal lath. This product has excellent engineering quality, construction security and widely used in tunnels bridges, valve basement systems, sewage systems, subways, retaining walls, nuclear power plants, shipyards, water pools and marine engineering works and high rise building projects and non-regular or bending pattern etc. asconcrete permanent assembly-free formwork.
Anping tenglu metal wire mesh co.Ltd Decorative perforated metal Decorative perforated metal is a sheet of material that contains a series of punched decorative holes. The shape of the hole is determined by the shape of the die. For perforated sheet metal with a decorative hole pattern, the die is shaped in various forms. Our decorative perforated metal is available in a wide array of hole shapes, gauges and materials in straight and staggered patterns. Decorative perforated sheet sizes: 48 inches x 96 inches 48 inches x 120 inches 36 inches x 96 inches 36 inches x 120 inches Decorative perforated metal is ideal for many architectural metal applications that require an aesthetic appeal. Decorative holes in perforated sheet metal offer design options with a wide array of hole shapes, gauges and materials in straight and staggered patterns
Mesh discs mesh panels
Magnesium ingot With purity 99.95% Piece weight: 7.5kg +/- 0.5 1 mt on pallet
Wollastonite is a naturally occurring mineral with many unique characteristics. Through advanced processing, it has become one of the most versatile functional fillers in the marketplace. Wollastonite increases the performance of many products including plastics, paints and coatings, construction materials, friction, ceramic and metallurgical applications to name a few. Wollastonite is an industrial mineral comprised chemically of calcium, silicon and oxygen. Its molecular formula is casio3 and its theoretical composition consists of 48% cao and 51% sio2. Natural wollastonite may contain trace or minor amounts of various metal ions such as aluminum, iron, magnesium, potassium and sodium. Wollastonite is rarely found by itself and generally contains other minerals like calcite, garnet and diopside that are removed during processing. Optimum performance is created by properly matching the correct coupling agent at the right concentration level to the polymer system. Overall, the benefits of a surface modified wollastonite are improved physical properties, improved processing along with improved dispersion of the resin.
Description: Electrolytic metal manganese refers to the elemental metal by using an electrolytic cell to electrolyse manganese salt precipitated by acid leaching of manganese ore. It is firm and brittle flakes with irregular shape. It is bright on one side with silver white color but rough on the other with brown color. The purity of electrolytic manganese is very high, containing 99.7% manganese. Application: 1.For the smelting of copper alloys, a large amount of manganese is required. Also, the composition is easy to be accurately controlled. 2.Electrolytic metal manganese is widely used in manganese copper alloys, manganese aluminum alloys and 200 series stainless steels. Manganese can improve the hardness, strength, toughness, wear resistance and corrosion resistance of metal materials. 3.Because of its high purity and low impurities, electrolytic metal manganese has been successfully and widely used in various fields such as iron and steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, welding electrode industry and aerospace industry.
Scaffolding metal planks Material:q195 or q235 Surface treatment:pre-galvanized Color:silver Length:1000-4000mm or as your request Width:210-500mm Thickness:1.0-2.0mm Height:38mm, 45mm, 50mm, 60mm, 76mm Hook:43mm, 50mm Emboss:available Packaging details:packed with steel strips, steel pallet, film or as customer's requst Application:outdoor building construction Delivery detail: Advantages Scaffolding metal planks is yxsy one of the most important products. Excellent quality and competitive price, oem is highly welcomed. 1.Scaffolding plank is the main parts of scaffolding system which is convenient for workers to walk on high building. 2.Stamping holes are on the scaffolding plank to resist skidding for workers. 3.The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment. 4.Secondary resources recovery. 5.Various size of scaffolding steel plank could be customized.
