Find Verified Refrigerator Tubes Suppliers, Manufacturers and Wholesalers

R134a Refrigerant Gas 250gHigh pressure empty tinplate refrigerant gas canSize: Dia 65x126mm (body height)Net capacity weight: 250gDeformation pressure 1.8 Mpa, Burst pressure 2.0 MpaUsage: Filling refrigerant gas R134a, R600a, R410a, etc� Products:250g Refrigerant gas can Diameter:65 (mm)Height:126 (mm)Thickness of body:0.24mm/0.25mmThickness of dome & cone:0.4mm/0.4mmPrinting:cmyk 4 colorsPressure:Deformation pressure:1.8 MpaBurst pressure:2.0 Mpa Tinplate Aerosol Can (Diameter)65MMHigh Pressure52MMHigh PressureOpening internal diameterA25.4 0.10mm-25.4 0.10mm-Opening external diameterB31.2 0.10mm-31.2 0.10mm-External diameter of doubleB63.2 0.10mm-63.2 0.10mm-Can heightD0.50mm-0.50mm-Total heightE1.00mm-1.00mm-Contact heightF4.00 0.15mm-4.00 0.15mm-Height of the double seamG3.25 0.10mm-3.10 0.10mm-Crinkle heightH6.90 0.20mm-7.00 0.20mm-Body diameterI65.60 0.20mm-52.60 0.20mm-Bucking pressure 1.3Mpa 1.8Mpa 1.5Mpa 1.8MpaBurst pressure 1.5Mpa 2.2Mpa 1.7Mpa 2.2MpaPalletCarton� � 1. What is your Key advantages?1) Experienced staff2) Advanced machine3) Excellent design5) Custom design is welcome2. Artwork fortmat?PDF or AI, CDR format3. Your payment details?1) 30% advance and the rest balance against B/L2) Total T/T or L/C4. What is your delivery details?1) FOB port Qingdao2) Packing carton or PP bag3) Lead time 20-25 working days after receiving deposit.

Specifications
Material:20# 45# 16mn 27simn   st52, bk+s, din2391, astm a 106 or according to your requirement.
Standard: gb/t8713-88 gb/t3639-2000 din 2391 en10305 or according to your requirement.
Straightness:0.3~0.8mm/m or according to your requirement
Elongation: 14%-25% or according to your requirement.
Id tolerance:h7-h8
Application:
Mining industry,    machinery processing,   natural gas oil transportation exploitation etc.
Process:
Cold-drawn, cold-rolled, honed, srb

-

Feature: -- Front door;
-- Compressor system is at the back

1. Material :All inside and outside is stainless steel 304. Stainless steel for inner & outer layer, also for the trays.

2. Compressors:High quality compressor, the Germany High quality compressor is Optional,each compartment has a separate temperature controller and a separate compressor system

3. Power: 220-240V/50Hz-60Hz, back up power (UPS) can supplier according to customer’s requirement.

4. 7 system failure alarms

5. High quality temperature control system. The large control panel and console, easy to operate. The inside room temperature is from 0 to -5?(±0.1?). And the temperature is -18?to 10? adjustable

6. Door Frame with a unique one-piece design, simple and easy to clean. Door seal belt can be replaced

7. USB interface, temperature record system is Optional.

Feature: -- front door;
-- compressor system is at the back

1. Material :all inside and outside is stainless steel 304. Stainless steel for inner & outer layer, also for the trays.

2. Compressors:high quality compressor, the germany high quality compressor is optional, each compartment has a separate temperature controller and a separate compressor system

3. Power: 220-240v/50hz-60hz, back up power (ups) can supplier according to customers requirement.

4. 7 system failure alarms

5. High quality temperature control system. The large control panel and console, easy to operate. The inside room temperature is from 0 to -5?(±0.1?). And the temperature is -18?to 10? adjustable

6. Door frame with a unique one-piece design, simple and easy to clean. Door seal belt can be replaced

7. Usb interface, temperature record system is optional.

Feature: -- Front door;
-- Compressor system is at the back

1. Material :All inside and outside is stainless steel 304. Stainless steel for inner & outer layer, also for the trays.

2. Compressors:High quality compressor, the Germany High quality compressor is Optional,each compartment has a separate temperature controller and a separate compressor system

3. Power: 220-240V/50Hz-60Hz, back up power (UPS) can supplier according to customer’s requirement.

4. 7 system failure alarms

5. High quality temperature control system. The large control panel and console, easy to operate. The inside room temperature is from 0 to -5?(±0.1?). And the temperature is -18?to 10? adjustable

6. Door Frame with a unique one-piece design, simple and easy to clean. Door seal belt can be replaced

7. USB interface, temperature record system is Optional.

“Linghua” Brand Mortuary refrigerator .The mortuary coolers are a series of product for hospital, funeral parlor, and postmortem examination department to store the corpse.



Model Number: LH-F-01; LH-F-02; LH-F-03; LH-F-04;LH-F-06

Specifications
Material:20# 45# 16mn 27simn st52, bk+s, din2391, astm a 106 or according to your requirement.
Standard: gb/t8713-88 gb/t3639-2000 din 2391 en10305 or according to your requirement.
Straightness:0.3~0.8mm/m or according to your requirement
Elongation: 14%-25% or according to your requirement.
Id tolerance:h7-h8
Application:
Mining industry, machinery processing, natural gas oil transportation exploitation etc.
Process:
Cold-drawn, cold-rolled, honed, srb


-

Specifications
Material:20# 45# 16mn 27simn   st52, bk+s, din2391, astm a 106 or according to your requirement.
Standard: gb/t8713-88 gb/t3639-2000 din 2391 en10305 or according to your requirement.
Straightness:0.3~0.8mm/m or according to your requirement
Elongation: 14%-25% or according to your requirement.
Id tolerance:h7-h8
Application:
Mining industry,    machinery processing,   natural gas oil transportation exploitation etc.
Process:
Cold-drawn, cold-rolled, honed, srb


-

Tunnel Paper Dehydrator, Paper Drying Machine, Paper Tube Core Dryer

1. Application of Microwave drying machine for paper products:

Mainly used in drying paper,cardboard,paper tube,paper round pipe,edge bore,gray cardboard,sheet-paper industries.Microwave drying equipment also used for drying stereotyping a� variety of cardboard,gray cardboard,kraft board,cardboard boxes,paper pulp,cardboard,pulp model etc.

2.Features of microwave paper dryer:

Microwave cardboard,paper tube drying equipment,microwave drying machine,continuous industrial drying machinery for paper products,microwave paper cardboard dehydrator is a modern high-tech production equipment,it has changed the traditional heating and drying cardboard heat transfer method.Microwave don't need preheat and heat transfer,directly heat from inside to outside at the same time.And the heating uniformity,don't has coking phenomenon. But the traditional hot air transfer because some time low-temperature,some high temperature,resulting in different angles of coking and inside coking outside endogeny phenomenon,uneven heating.
Microwave paper products drying equipment can work continuously,easy to control,advanced craftwork,only one person can operate this machine,save labor.
Microwave have strong penetration for cardboard,practice shows that in cardboard production process, microwave drying compared with conventional process,not only fast drying speed,low power consumption,but also greatly improved the product quality.

3.Features:

1. Strong glue,greatly improved water resistance and compressive strength.
2. Fast drying,cardboard uniform,flat,small change.
3. Have strong sterilizing function while in microwave drying process,greatly improved mildew resistance ability.
4. Compared with far infrared drying,drying time short two-thirds,electricity consumption save 1/3.


Microwave machine model: YM-6, YM-12, YM-15, YM-20, YM-30, YM-30..........YM-200 etc. to understand more information !

Specifications
Material:20# 45# 16Mn 27SiMn   ST52,BK+S,DIN2391,ASTM A 106 or according to your requirement.
Standard: GB/T8713-88 GB/T3639-2000 DIN 2391 EN10305 or according to your requirement.
Straightness:0.3~0.8mm/m or according to your requirement
Elongation: 14%-25% or according to your requirement.
ID tolerance:H7-H8
Application:
Mining industry,   machinery processing,  natural gas oil transportation exploitation etc.
Process:
Cold-drawn, cold-rolled, honed, SRB


-

1.Standard sizes:
Od: 30-250mm
Wall thickness: 3-35mm
Length: 3-5.8m
Tolerance: h8
Straighness: 0.5mm/1000mm
Steel grade: 20-45#, 16mn, q345, st52, st 37, etc.
Standard: din, gb, astm, api, etc.
Non-standard sizes:
As cuetomer's request.
2.Surface treatment:
Oil painting, galvanized, chromed, or as customer's requirments.
3.Package:
Packed in bundle, with plastic caps, plastic bag, etc
4.Delivery time:
Within 30 days generally
5.Payment term:
T/t, l/c( we prefer t/t)

1.Item: English Style Forged Double Coupler/Clip for Tube Scaffold

2.size:48.3mm;

3.material :Q235;

4.standard : EN74,BS1139

5.ISO 9001:2000 is approved;

6.OEM service is available.

7.type:British Type Double Coupler



Item English Style Forged Double Coupler/Clip for Tube Scaffold
Item NO. SD-3001A

Material
Q235

Surface
Electroplate,Zinc Plate

Size
48.3*48.3mm
weight
1.00kg


Port

Qingdao


Payment

L/C,T/T We can contact in detail

Shipment FOB,CIF,EXW
Package knited bags + steel pallets or as required
DeliveryDetail 20-45days
Standard EN74,BS1139

SY Series Tube Machines are ideal equipment for producing concrete tubes, now
Concrete Pipe Making Machine (SY1000):
Technique Parameter:
1)Rated Power: 5.5-22kw
2)Standard: GB11836-89
3)Tube Specification: 200-1000mm
4)Concrete tube and pipe making machinery

Intrduction of SY1000 Concrete tube making machinery
SY Series Tube Machines are ideal equipment for producing concrete tubes, now. It is reasonable in design, beautiful in appearance, reliable in performance and convenient in operating. Its quality is up to State Standards of GB11836-89. With this series of machines, the concrete tubes with specifications of 200 -1000mm can be produced by using pulverized coal ash, slag, sands and crushed stone pulsing little quantity of cement.

The tubes produced with this series machines are even in their wall thickness, smooth on surface, high in compression strength, convenient and firm in connection, and excellent in anti-seeping, which are widely used in agricultural irrigation and draining projects in cities.

1.Standard sizes:
Od: 30-250mm
Wall thickness: 3-35mm
Length: 3-5.8m
Tolerance: h8
Straighness: 0.5mm/1000mm
Steel grade: 20-45#, 16mn, q345, st52, st 37, etc.
Standard: din, gb, astm, api, etc.
Non-standard sizes:
As cuetomer's request.
2.Surface treatment:
Oil painting, galvanized, chromed, or as customer's requirments.
3.Package:
Packed in bundle, with plastic caps, plastic bag, etc
4.Delivery time:
Within 30 days generally
5.Payment term:
T/t, l/c( we prefer t/t)