Oil filter, fuel filter, air filter.
Industrial filter.
Air filter, fuel filter, oil filter, cabin air filter.
The most widely used high-efficiency filtration system Equipment Introduction - The CFF Filtration Box (CFB) is widely used for molten aluminum filtration in the aluminum casting process to prevent the particulate impurities in molten aluminum from entering the casting blank and affecting the quality of aluminum products. -According to the quality requirements of castings, the volume of molten aluminum, the total volume of filtered aluminum, and the cleanliness of the aluminum itself, the correct selection of the type of filter box and the specifications of the foam filter plate help to achieve satisfactory filtration results. Main parameters of the CFB filtration box - Maximum temperature of molten aluminum: 750°C - Shell surface temperature: 70°C -Lining life: 12 months Common specifications of CFB filtration box Filtration Box Type Code Filtration Board Size inch Flow Range t/h Remarks Single-stage filtration box CFB1-12 12 2-5  A single filtration board is placed in the filtration box to filter out more than 85% of the inclusions with a particle size 8�¼m CFB1-15 15 4-10 CFB1-17 17 8-15 CFB1-20 20 12-20 CFB1-23 23 16-25 Horizontal two-stage filtration box CFB2-12/12 12/12 2-5 Two-stage filtration boards with different pore sizes from large to small are placed in the filtration box horizontally or vertically to filter out more than 95% of the inclusions with a particle size 8�¼m CFB2-15/15 15/15 4-10 CFB2-17/17 17/17 8-15 CFB2-20/20 20/20 12-20 CFB2-23/23 23/23 16-25 Vertical two-stage filtration box CFB2-15/12 5/12 2-5 CFB2-17/15 17/15 4-10 CFB2-20/17 20/17 8-15 CFB2-23/20 23/20 12-20 Two-channel filtration box CFB-12/12 12/12 2-52 Two channels in the filtration box for parallel arrangement of filtration boards of the same pore size. Used for continuous filtration of molten aluminum, one for use while the other as backup; used for filtration of large-flow or high-viscosity molten aluminum. Both channels meet the flow requirements together. CFB-15/15 15/15 4-102 CFB-17/17 17/17 8-152 CFB-20/20 20/20 12-202 CFB-23/23 23/23 16-252 Notes:Equipped with heating device as needed.
The aperture is so toothful to keep away the sediment. The aperture is uniformity. The mini hole occupies the 80% of the whole plate, so the filter speed is fast. No resort on the plate. Widely used in many kinds of liquor. Small volume, easy to change the core, and easy to operate. Iron frame.
Vane-type diatomite filter can be applied for the beverage industry, sugar industry, seasoning, pharmaceutical industry, chemical product and so on. Features of vane-type diatomite filter: 1. Sealed cover, perpendicular filter vane, compact structure, few movable part, convenient to maintenance. 2. Easy to operate, disassembling is unnecessary when cleaning and discharging, low labor intensity. 3. Superior quality of corrosionproof, long-life for use. 4. Stable operation, reliable quality, effective filtering and excellent result. 5. High production efficiency, low energy consumption and little loss of beer.
B.Technical date of AC single phase 1 stage filter/EMI filter Rated Voltage: 110/250VAC Rated Current@400.5A-250A Test Voltage: Line-line: 1760VDC/ Line-ground: 2000VAC Climatic category: 25/085/21 Operating frequency: 50/60Hz Certification: CE;EMC;RoHS;UL;NSF;ISO export standard packing
Standard Efficiency Cat,engine air filters are designed for maximum protection and optimum performance.
High temp resistant HEPA filter is a kind of air filter that can withstand up to 250 C, even up to 350 for a long time. Commonly, the frame is made of stainless steel, and filter materials adopt fine glass fiber. Especially, aluminium are used as the separators. It cannot be used for high efficiency air filtration, but also can be used under high temperature atmosphere. High temp resistant HEPA filter is especially designed which can be used in a broad range of industries, such as hot air type high temperature ovens in electronic factories, clean room, high temperature production line, spraying industry, ultrasonic industry and other high temperature purification sites. At the same time, the aluminum separator design divides the filter media and creates air flow tunnel. Silicone, a special heat resistant sealant is adopted in high heat HEPA filter for adhesion agent and gaskets, preventing bypass leakages perfectly. Features Ultra-fine glass fibre with alkali-free. High temperature resistance. Aluminum foil for separator, anti-deformation. Low resistance, high efficiency. Silicone as the sealant and gasket material, ensure the filter has a good effect in high temperature condition. The efficiency of dop 0. 3 micron particles over collected is 99. 97%. Specifications High temp HEPA filter's efficiency ranges from F9 to H14 and is based on a deep-pleat construction, high temperature resistance or ultra-fine fiberglass filter paper as the media, high temperature sealant, special aluminum foil as the separator, and specialized folding equipment. Applications Hot air type high temperature ovens Clean room in different area, such as aerospace, electronics, semiconductors, pharmaceuticals, hospitals, etc. High temperature production line High temperature paint spray line High purified baking booth and baking box
Mini-pleated panel HEPA filter is a kind of filters adopts equidistance and flow-friendly design of the pleats, as well as uniform media velocity and a very minimal pressure drop. This implies a very reliable and cost-effective operation along with a quasilaminar outflow. Mini-pleated panel HEPA filter is a type of HEPA filter intended to remove the smallest particles. The filter employs a unique medium designed to absorb both small and large particles while limiting airflow as little as possible. The MINI PLEAT structure is intended to increase the surface area of the filter. In comparison to conventional pleated filters, this filter has an average surface area that is over 5 times larger. Longer filter life and greater filtering capabilities result from the increased surface area. Characteristics Filter media are high-performance micro-glass-fiber papers. Filter Classes E10-H14. Cast airtight joint connecting filter media to frame. High durability, resistance to organic compounds. High efficiency, low resistance, simple installation, superior sealing, compact structure, and cheap running costs. Applications Sophisticated air-conditioning Hospitals' operating rooms and intensive care units, pharmacies, sterile rooms, labs, research facilities, etc. Sensitive industrial processes Microelectronics, pharmaceuticals, biotechnology, chemicals, optics, and food and beverages Outlets and modules in the ceiling for adaptable cleanroom systems.
Clean bench is designed to meet the needs of modern industry, the optoelectronic industry, biopharmaceuticals and scientific research and testing for the cleanliness of local working areas. The air is sucked into the pre-filter through the fan and filtered through the static pressure box into the high efficiency filter, which sends the filtered air out in a vertical or horizontal airflow, so that the operating area can reach class 100 cleanliness and ensure the production requirements for environmental cleanliness. Principle In a specific space, the indoor air is pre-filtered by the pre-filter, pressed into the static pressure box by a small centrifugal fan, and then filtered by the high-efficiency air filter. The clean air blown from the air outlet of the high-efficiency air filter has Accurate and uniform cross-sectional wind speed can eliminate the original air in the work area and take away dust particles and biological particles to form a sterile and high-clean working environment. Use In factory production, the workload of inoculation is very large, and when it is necessary to work for a long time, the horizontal laminar flow clean bench is an ideal equipment. The advantages of the ultra-clean table are that it is convenient and comfortable to operate, relatively comfortable, high work efficiency, short preparation time, can be operated in more than 10 minutes after starting up, and can basically be used at any time. The service life of the ultra-clean table is related to the cleanliness of the air. In temperate regions, ultra-clean benches can be used in general laboratories. However, in tropical or subtropical areas, due to the high amount of pollen in the atmosphere, or areas with a lot of dust, the ultra-clean table should be used in a better indoor room with double doors. Application Clean bench is a one-way flow air purification equipment that provides a local dust-free and sterile working environment. It is suitable for scientific research and production departments that require a local clean and sterile working environment, such as medicine and health, biopharmaceuticals, food, medical science experiments, optics, electronics, aseptic room experiments, aseptic microbial inspection, plant tissue culture and inoculation.
Automatic Roll Air Filter can avoid human error and wastage as well as maintain filter efficiency throughout operation. AUTOROLL is made of firm metal structure which can operate under harsh environment. It has an intelligent auto filter replacement function which is adaptable to various air flow conditions. Its auto rolling function can effectively lower down power consumption and manpower requirement. Intelligent automatic filter media replacement control system- time/pressure difference indicator system. This is the main part of Auto Roll filter in which the filter replacement is controlled by pressure difference indicator. This can avoid human error and wastage as well as maintain filter efficiency throughout operation. Working principle: Setting up sensors at both the air inlet and outlet filter surfaces. Setting up final pressure drop of filter. When pressure difference exceeds the preset final pressure drop value, the control system will end out signal to start up the motor for filter rolling. The pressure difference value can be set manually. Features: Auto filter media replacement Pressure control system Modular assembly system Firm structure Application place: 1. The primary filter section of the air-conditioning ventilation section. 2. A working environment with high dust particle content and frequent replacement of filter materials. 3. The operating system with unstable air volume. 4. The pre-filtration section of the central air conditioning and ventilation system of the clean room. 5. Ventilation system of ordinary industrial plants.
Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms. 1. The filtration efficiency of 0.3 micron particles is above 99.99%. 2. The housing of Ceiling Terminal HEPA Filter Modules are made of high-quality galvanized steel plate, anodized aluminum profile or stainless steel sheets, with a fire-proof insulation layer attached to the outside, which is suitable for various ceilings and has wide applicability. 3. It adopts folding chip without partition, and the filter material adopts ultra-fine glass fiber filter paper, which has low resistance and large air volume and takes up less space. 4. The structure is compact, the investment cost is low, the installation and maintenance are simple and convenient, and environmental protection, and low cost; the filter screen can be replaced, and it does not need to be replaced together with the box, which reduces costs and saves resources. 5. It can be customized according to customer requirements, and each filter module is strictly tested. Standard Parameters Unit material: Anodized aluminum Media: Ultra fine glass fiber/Glass fiber or PP Separator: Hot melt adhesive Std.EN1822:2009: E11/E12/H13/H14/U15/U16 Efficiency: 95% / 99.97% / 99.99% / 99.999% at 0.3m .99.99995%,99.9995% at 0.12�¼m (DOP/PSL/PAO Counting method) Maximum temperature: 70 Maximum relative humidity: 100% Inlet duct standard diameter: 350mm/300mm/250mm Customized size: Available Applications Ceiling Terminal HEPA Filter Modules are mainly used in Class 1000 ~100,000 clean room environment final filter equipment. Not only can it replace the use of traditional air filter boxes, but also it has the advantages of easy replacement and maintenance cost saving. It's preferred by many engineering firms.
FFU fan filter units can be modularly connected for use, FFU is widely used in clean rooms, clean workstations, clean production lines, assembled clean rooms and partial class 100 applications, etc. Using FFU fan filter units can make simple clean workstations, clean sheds, clean transfer cabinets and clean storage cabinets, etc. It is suitable for obtaining a high level of clean environment in various environments. It provides high quality clean air for clean rooms and micro-environments of different sizes and cleanliness levels. In the new clean room and clean plant type renovation, it can improve the cleanliness level, reduce noise and vibration, also can greatly reduce the cost, easy to install and maintain, is the ideal part of clean environment. A fan filter unit is a combination of a fan and a filter (HEPA or ULPA) to form a self-powered end purification unit. To be precise, it is a self-powered, modular end-supply unit with filtration efficiency. FFU basic structure (1), The box: its material commonly used galvanised aluminium alloy coated steel, aluminium alloy, stainless steel three. The function is to support the fan and the air guide ring, and the second is to support the flow guide. (2), Guide plate: airflow equalisation device, built into the interior of the box, the fan below the surrounding. (3), the fan: there are single AC (AC/1Phase), DC (EC/1Phase), three AC (AC/3Phase) three. (4), Control components: for AC FFU, its commonly used five-speed governor or infinitely variable governor; DC system control chip embedded in the motor internal, with the help of special control software, computer, control gateway and network lines to achieve remote control. (5), Filters. Pre-filter: filtration of large dust particles, non-woven, primary filter, filter frame. High efficiency filter: HEPA/ULPA (High Efficiency/Ultra High Efficiency). Chemical filter (Chemical Filter): in addition to ammonia, boron, organic gases, etc., generally installed in the air inlet, the same as the pre-filter installation method. FFU features 1, FFU purification level: static class 100. 2, FFU air speed is: 0.3/0.35/0.4/0.45/0.5m/s, FFU noise â?¤ 46dB, FFU power supply is 220V, 50Hz. 3, FFU adopts high efficiency filter without partition, FFU filtration efficiency is: 99.99% to ensure purification level. 4, The whole FFU is made of high quality aluminized zinc plate. 5, FFU stepless speed control design, speed control performance is stable, FFU in the state of high efficiency filter final resistance can still ensure the same air volume. 6, FFU uses high efficiency centrifugal fan, with long life, low noise, maintenance-free and low vibration. 7, FFU is especially suitable for assembling into ultra-clean production line, which can be arranged as FFU single unit according to the process needs, or FFU multiple units to form a 100-level assembly line.
ABS Frame V Bank HEPA Filter has large effective filtering area, small resistance, light weight, large capacity and high air volume. ABS Frame V Bank HEPA Filter is a kind of V bank HEPA filter, it has the distinct advantages of high-load, high-efficiency air for constant airflow and variable airflow systems. The filter consists of a number of non-separator filter elements in a V-shaped structure, which is installed in ABS filter box(also you can choose spray-coated galvanized steel sheet). Compared with ordinary filters, this structure greatly increases the amount of filter material. Larger filter media area in existing system installations ensures lower pressure loss, which reduces energy consumption and saves operating costs. Features Rich pore structure; Large specific surface area; Strong adsorption capacity; Great deodorizing effect; Low-pressure drop and high dust holding capacity; Long lifetime; Strong structure and beautiful appearance; Temperature resistance: 100 C; Moisture resistance(relative humidity) 80%RH. Applications Commercial and industrial ventilation, air conditioning system. High humidity ventilation system. Install a tight ventilation system. Electronic technology, medical and health, bio-pharmaceutical, food and beverage, mechanical and electrical engineering equipment, precision instruments, metallurgical chemicals, painting, air conditioning, printing, environmental protection industries, etc.
HEPA Filters with separators is one type of HEPA filter we manufacture, it is know as deep HEPA filter, also known as the separate HEPA filter. They are the HEPA filters that work the best. Double metal mesh grilles protect filter material from damage during transit or installation and can simultaneously provide significant air flow rates and low resistance. To aid in the connection between the filter media and the frame and to prevent leaking, our deep pleat HEPA filters have polyurethane glued completely around the filter frame slot. Characteristics Large filter area High dust holding capacity Durable, and moisture-resistant construction Long service life Multiple choices: single header, double header or no headers Applications Industrial area: pharmaceuticals, hospital, electronic, food-and-beverage, chemical, pharmaceutical, surface treatment technology Advanced air conditioning: laboratories, museums, airports, office buildings, clean room Industries of rotating machinery: engines, gas turbines, and centrifugal compressors
Standard Features Motor type: EC motor (BLDC motor), Motor efficiency:88% HEPA filter: 99.99% efficiency 0.3 micron Housing material: Galvanized steel Available in 2x4, 4x4 sizes Everage Air velocity: 0.45m/s 10% Noise: 0.25~0.45M/set, 48~55d BA (Noise test:1.5M under the filter) Power: AC 1ph, 200~240, 50/60Hz Optional Features Filter Efficiencies: HEPA 99.995% or ULPA 99.9995% at MPPS Powder coat white paint or stainless steel housing G4 pre-filter available (shipped loose) Ducted inlet connection (shipped loose) Chemcical filter (shipped loose) Custom sizes available Applications EC FFU are primarily used in critical environments requiring clean air solutions. These include cleanrooms, biological laboratory, pharmaceutical compounding, semiconductor and microelectronic manufacturing, and healthcare facilities.
Compared with glass fiber filter and PP filter media,PTFE HEPA filter/ ULPA filter media has great advantages, such as extremely low chemical gas dispersion, better uniform fiber distribution, smaller fiber diameter and pore size. These features can greatly reduce filtration resistance and improve filtration performance, thereby greatly reducing energy consumption. Product Introduction Frame: Aluminium alloy / Galvanized steel/Stainless steel Media: Polytetrafluoroethylene (PTFE) Media guard: Paint finished expanded mesh Standard Frame thickness: 55mm, 70mm (Non standard thickness can be customized) Design: Panel type Maximum temperature: 250 C Maximum relative humidity: 100% Filtration efficiency: HEPA MPPS MPPS ULPA MPPS: MPPS Product Feature 1. High toughness, strong damage resistance, in harsh environments, with excellent acid resistance (including Fluoric acid), alkali resistance, resistance to organic substances. 2. Low volatility (boron-free) clean material, reducing the release of impurity waste gas (boron, potassium, silicon, etc.); no metal pollutants. 3. Compared with ordinary glass fiber materials, the pressure loss is reduced by about 40%, which reduces energy consumption, saves space and reduces weight. 4. Lightweight, good sealing, compact structure, easy installation, high efficiency, low resistance and low operating cost. Product Applications PTFE HEPA filter/ ULPA filter is widely used in semiconductor, electronics, precision manufacturing, bio-pharmaceutical and other industries.
Primary/medium/high efficency air filter, hepa ulpa air filter, clean bench, clean booth, transfer window, air shower and other cleanroom products..Manufacturer
Storage equipments include warehouse racks, like pallet rack, drive-in pallet rack, push-back rack, steel shelving, pallets, wire container, lift floor.
