BOROSILICATE GLASS Clear borosilicate glass tube and rod Colored borosilicate glass tubes and rod Laboratory glassware Glass joint Other glass products made by boro 3.3 glass.
pharmaceutical glass packaging: Neutral glass tubes USP type I, clear and amber color. Glass Ampoule, USP type I Tubular Glass Vial for injection, USP type I, Molded Injectable glass vial, USP type I,II,III, Butyl rubber stopper,/Aluminum-Plastic Cap. Agent of vial-forming machine.
OUR COMPANY: Top manufacturer and exporter of the pharmaceutical glass and borosilicate glass. Excellent quality and good service. Fast shipment. PRODUCT FULL LIST : pharmaceutical glass packaging: Neutral glass tubes USP type I, clear and amber color. Glass Ampoule, USP type I Tubular Glass Vial for injection, USP type I, Molded Injectable glass vial, USP type I,II,III, Butyl rubber stopper,/Aluminum-Plastic Cap. Agent of vial-forming machine. BOROSILICATE GLASS Clear borosilicate glass tube and rod Colored borosilicate glass tubes and rod Laboratory glassware Glass joint Other glass products made by boro 3.3 glass. - > RESISTANCE TO CHEMICAL Borosilicate glass is inert to almost all materials except hydroflouric acid (HF) phosphoric acid((H3Po4) and hot strong caustic solutions. Of these Hydroflouric acid has the most serious effect, even when it is present in PPM (parts per million) in solutions. Where as phosphoric acid and caustic solutions cause no problems when cold but at elevatrd temprature corrosion occurs. in case of caustic solutions upto 30% concentration can be handled safely at ambient temperature. Under actual operating conditions, the effect of turbulence, and traces of other chemicals in the solution may increase of decrease the rate of attack. So it is not possible to give exact figures for corrosion by caustic solutions. - > THERMAL PROPERTIES Linear coefficient of thermal expansion The coefficient of thermal expansion of borosilicate glass over the temperature 0 - 300�°C is 3.3 x 10-6/�°C. This is very low when compared with other glasses and metals. That is why, borosilicate glass is often called low expansion borosilicate glass. Specific heat Specific heat between 25C and 300C is average to be 0.233Kcal/Kg, C Thermal Conductivity Thermal conductivity is 1.0 Kcal/hr,mC. Over the permissible operating temperature range. - > RESHAPEING In the given below are shown characteristic temperature at a determined viscosity, essential for glass reshap. Lower cooling temperature 1024 poise 515C Upper cooling temperature 1013 poise 565C Softening point 107 poise 795C Reshapeing point 104 poise 120 C Specification of borosilicate glass 3.3
OUR COMPANY: Top manufacturer and exporter of the pharmaceutical glass and borosilicate glass. Excellent quality and good service. Fast shipment. PRODUCT FULL LIST : pharmaceutical glass packaging: Neutral glass tubes USP type I, clear and amber color. Glass Ampoule, USP type I Tubular Glass Vial for injection, USP type I, Molded Injectable glass vial, USP type I,II,III, Butyl rubber stopper,/Aluminum-Plastic Cap. Agent of vial-forming machine. BOROSILICATE GLASS Clear borosilicate glass tube and rod Colored borosilicate glass tubes and rod Laboratory glassware Glass joint Other glass products made by boro 3.3 glass.
Main features 1. PLC control. It adopts the mathematical input control system for washing section, aluminum spacer bar frame installation, pressing section. With discontinuous working method, it is humanized and saves energy. Higher automation, easy operation. 2. Human machine interface touch panel, easy switch of automatic and manual. Every section has its operating display function. 3. Automatic identification of coating glass and low-e glass(optional). Automatic alarm and stopping transfer if wrong coating. 4. The washing section is made from the welded bending industrial stainless steel plate. 5. The normal brushes is separate while it washes coating glass and low-e glass. 6. Oil-free lubrication waterproof bearing is used to avoid water pollution.
1. It is designed for grinding straight line flat edging of different sizes and thickness. 2. The coarse grinding, refine grinding, polishing, and angle-making can be finished in one process. 3. The speed can be widely adjusted by its stepless regulator. Speed alteration is very smooth. In grinding operation, feeding and operation speed can be adjusted at random. Front rails can be adjusted to fit varied thickness of processed glass. 4. It is featured in advanced structure, high precision, easy handling, and high efficiency.
Main feature ¬Whole machine adopt man-machine interface, the operation is more convenient and intuition with the simplified thinking design interface. ¬The glass edge and corner is full without air bubbles, smooth surface, no need to pare the corner the condition that the glass are cut levelly and without dislocation after combined. ¬High automation, high efficiency, suitable for glass deep processing enterprise to use. ¬Can use two sets of independent sealant supply system( including the mixing device), two kinds of sealants switch in one-key operation easily.ïoptionalï ¬Servo control system adopts world famous brand (Japan Anchuan), the performance is stable. ¬Synchronous belt transmission to make the glass being transferred smoothly with accurate positioning. ¬The spare parts are produced with high standardization and high precision, ensure the machine can be used with long-term stability. ¬Support three layer glass sealant. ¬Automatic identification of glass size, glue, glue speed linear adjustment. ¬Automatic angle correction function, appearance is beautiful. ¬Glue supply system adopts Japan SMC cylinder, supply stability, the stability is good. ¬Beautiful appearance generous, glass transfer smoothly no scratch, no pollution. ¬Separate all equipped with manual functions, convenient adjustment. ¬All size glass gluing fully at a time.
We specialize in insulating glass machines for more than 12 years in China, and we have customers all over the world. Such as South American , North American, India , Pakistan, Middle East , Europe and African , Australia and Newzerland and so on. We provide the high quality with the nice price and best after-sale service. More details about our products, welcome to contact me
Specifications before scaling:860mm Specifications after scaling:860mm Handling way:Cylinder, using cylinder to flip 90 degrees and rotate 90 degrees. Features: use pneumatic cylinder for the movement of ascension, flip, rotate, moving speed, speed up the production efficiency Safety tank volume:About 5L Control handle specifications:The integrated control unit Vacuum suction pad units:Roundity,4 units,each suction pad test out the result 100kgf under the condition of 60% vacuum pressure,4 times safety coefficient, Vacuum ejector:Korea DRMC,1 pcs,Ultimate vacuum pressure is 85%
Performance characteristic 1.Advanced PLC automatically control system 2.Can make out quadrilateral and polygon 3.Accurate position , automatically baiting. 4.Single button to operate startup and shutdown of machine. Touch sreen and online help. The head of cutter can be adjusted automatically, and it is unnessary to change the head of cutter when the width of spacer bar is more than 6mm. 5.Fuji servo feeding system with digital control system, and Siemens control system. ModelLZW01 Power supply380V 50Hz 90W Air pressure0.5-0.8MPa Bending angle90-120 degree Aluminum width
Technical Parameters for Standard Automatic Insulating Glass Production Line ModelLBP2000D Max. processing glass size (mm)2500*2000(first press) 3000*2000(second press) Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power30.4KW ( include heater 5KW) Total Weight (Kg)7500 Outline dimension (mm)19500*2200*3050
Technical Parameters for Inner-panel Assembly Insulating Glass Production Line ModelLBP1800Q Max. processing glass size (mm)2500*1800 Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power30.8KW(include heater 10kw) Inert gas typeArgon, Nitrogen, ect Total Weight (Kg)7800 Outline dimension (mm)19720*2200*2850
Technical Parameters for Inner-panel Assembly Insulating Glass Production Line ModelLBP2000Q Max. processing glass size (mm)3000*2000 Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power34.8KW(include heater 10kw) Inert gas typeArgon, Nitrogen, ect Total Weight (Kg)8500 Outline dimension (mm)22800*2500*3180
Technical Parameters for Inner-panel Assembly Insulating Glass Production Line ModelLBP2500Q Max. processing glass size (mm)3600*2500 Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power35.3KW(include heater 10kw) Inert gas typeArgon, Nitrogen, ect Total Weight (Kg)9800 Outline dimension (mm)24000*2500*3680
Main features 1. Adopt PLC control system and touch human-machine interface. Multi-screen clear and technical parameter simply input. 2. Feeding material and bending aluminum spacer by servo motor guarantees the precision of the bending form (angle and arc). 3. Aluminum frame have smooth arc, which is beautiful after butyl coating. 4. Bending aluminum frame and theoretical size error is less than 1mm, high speed, high efficiency. 5. Can feed four different size of aluminum spacer with four store tanks. 6. Automactic avoid spacer joint when bending and cutting spacer. 7. Can do shaped aluminum frame. Power Supply220V/50Hz Total power2.5Kw Air pressure0.6 Mpa Aluminium width6-30mm Spacer specification4000-6000mm Max. aluminum frame size2000 x 2000mm Min. aluminum frame size280 x 200mm Outline dimension L*W*H10500x2200x2100mm
Technical Parameters for Standard Automatic Insulating Glass Production Line ModelLBP1800D Max. processing glass size (mm)2000*1800(first press) 2500*1800(second press) Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power25.4KW ( include heater 5KW) Total Weight (Kg)6800 Outline dimension (mm)17300*2200*2850
Technical Parameters for Standard Automatic Insulating Glass Production Line ModelLBP1800D Max. processing glass size (mm)2000*1800(first press) 2500*1800(second press) Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power25.4KW ( include heater 5KW) Total Weight (Kg)6800 Outline dimension (mm)17300*2200*2850
Technical Parameters for Outer-panel Assembly Insulating Glass Production Line ModelLBP1800C Max. processing glass size (mm)2500*1800 Min. processing glass size (mm)450*200 Signal glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power30KW(include heater 10KW) Total Weight (Kg)7800 Outline dimension (mm)19720*2200*2850
Technical Parameters for Outer-panel Assembly Insulating Glass Production Line ModelLBP2000C Max. processing glass size (mm)3000*2000 Min. processing glass size (mm)450*200 Signal glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power34KW(include heater 10KW) Total Weight (Kg)8500 Outline dimension (mm)22800*2500*3180
Technical Parameters for Outer-panel Assembly Insulating Glass Production Line ModelLBP2500C Max. processing glass size (mm)3600*2500 Min. processing glass size (mm)450*200 Signal glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power34.6KW(include heater 10KW) Total Weight (Kg)9800 Outline dimension (mm)24000*2500*3680
