Production capacity:15-50 m3/hr Linear speed of conveyor belt:6m/min Motor power:5.5kw Product description: gd series box-type feeder is the feeding equipment used to balance and ration during brick production. The rotary mud making rod of this equipment can crush the comparatively large soft materials. As requirement
Production capacity:20-80 m3/hr Working width of chain plate:680mm Motor power:3kw (1) product description: gl series plate feeder is the intelligent automatic feeder of stepless speed regulation type which was designed and manufactured by our factory on the basis of absorption of advanced structure of intermittent feeder. The electric motor adopts ytps series variable-frequency motor and the speed-adjusting range is 100-912 / min. The control system can be set into automatic and manual modes according to users ' needs: the automatic state should match the material quantity control systems of automatic cutting and extruding machines of our factory so as to achieve the automatic control for whole process line; the manual state adjusts feeding speed by potential or control panel, which has simple and convenient operation and smooth-running chain plate; the built-in computer can automatically set acceleration and deceleration time according to the load state of motor to achieve í¦fuzzy optimal acceleration and decelerationí¦ control. (2) advantages: rational structure, low failure rate, convenient maintenance; the control system can automatically choose optimal operating mode according to the load state of motor, so that the motor operating loss is at lowest and can save electricity over 60 percent. It is the most advanced energy-saving feeding equipment in domestic building material industries. As requirement
Production capacity:14000-20000¿standard)block/hr Forming moisture:14%-18% Vacuum degree:n-0.092mpa Motor power:160+75+7.5(22)* Product description: "jinniu brand" series double stage vacuum extruder is the new brick making equipment designed and manufactured by our factory through several researches and use of domestic and international advanced experience. The main frame is welded by using high-quality steel, and has the features of rational structure, solid and durable properties, strong adaptability, low energy consumption, high efficiency, and easy maintenance and so on. It is the ideal equipment for production of various hollow brick, shale, coal gangue and coal ash. Advantages: all-steel welded structure, floating spindle, wear-resistant high-chromium alloy hub. The personalized rimer which is newly designed according to the nature of raw materials has the features of high output, low power and excellent performance As requirement
The machine applies to 90 v groove cutting for aluminum and plastic profiled bar which is clamped and cut by pneumatic drive ; it has characteristics of simple operation , high safety, exact cutting dimension, and convenient maintenance. Technical Parameter: Air pressure:0.4-0.6MPa Air consumption:80L/min Input voltage:380V 50HZ Total power:0.75KWx2 cutting depth:0-65mm Welding length:300-1700mm.
The machine applies to processing glass strip ; it adopts saw bits that can cut off and chamfer angle for glass strip at one time .the machine is horizontal fixed. It has characteristics of simple operation ,stable running ,convenient clamping for ptofiled bar; its work efficiency is high. Technical Parameter: Air pressure:0.4-0.6MPa Air cosumption:80L/min Input voltage:380V 50HZ Total power:0.75KWx2 Speed:2800r/min Welding length:320-1800mm.
It is mainly used for exterior wall construction, decoration, cleaning and maintenance of high-rise buildings. The safety lock automatically fasten the steel wire rope within 100mm, when the load cable is stuck or broken, out of hoist or the platform is inclined. The platform can be made of steel or aluminum alloy according to your desire. The specifications are as follows, Model: Zlp 630 Zlp 800 Rated loading capacity: 630kg 800kg Lifting speed: 9.6m/min 8m/min Length of the platform: 1m-6m 1m-7.5m(according to the customers' desire) Standard length: 2m*3 set 2.5m*3 set Weight of the platform: 358kg 450kg Power of the motor : 1.5kw*2set 2.2kw*2set Model of the hoist : ltd6.3 Ltd8.0
Ceramic tiles, porcelain tiles, granite, marble, limestone, sanitary ware.Buying agent
Agricultural products such as garlic, land, onions, etc. rock wool/eps/pu sandwich panels, polyurethane metal exterior wall decorative panels, wpc wood plastic exterior wall decorative panels, interior wall decorative panels, lightweight composite wall panels, roof tiles and other building materials.
Glass tube and rods: borosilicate glass soda lime glass neutral glass *heat resistant(borosilicate) glass storage, jar *heat resistant(borosilicate) glass teapot, cup, fruit juice cups ,vase, oil lamp, candle holder, glass art wine bottle, xmas balls(christmas balls) *heat resistant(borosilicate) glass bongs, smoking pipe and ground joints *borosilicate glass vials and ampoules *borosilicate laboratory glass instruments: tube with accurate graduation, measuring cylinder, volumetric flask, burette, pipette, beaker, boiling flask, erlenmeyer, reagent bottle, bell jar, test tube, glass ground joint etc. * solar products: solar stove for bbq, all glass vacuum solar tube, heat pipe solar collector, solar water heater..
Mini carding machine Small mini lab wool and cotton sample carding machine for spinning line 1, equip with villus bucket or hopper to improve the quality of output sliver/web 2, wool and cotton available 3, Full-closed protective cover 4, Mini type machine, save researching cost and easy to operate and maintain 5, Imported frequency converter control, high efficiency 6, Its been drived by a 2.2kw motor, equipped with a electric control cabinet and frequency converter to adjust the running speed. Packing size:1800x1100x1100
A4 copy paper slitting machine, chm-a4-2/4/5 a4 copy paper production line spiral groove, with no backlash gear, to achieve the world's most advanced double synchronous cutting synchronization of new technology. It is a copy paper processing equipment which can make the paper cut, pack and make the paper packing box automatic. Cutting type: a4-4/5 Paper width: 845-850mm Production speed max 450m/min Precision: +0.2mm No.Of paper rolls 2rolls No.Of cuttings 2cutting Ream output: max 16 reams/min Power 23kw+18kw Dimencisions(l*w*h) 9383mm*6875mm*6733mm
Main features: 1. The rotary disc is connected with the spline on the main shaft to ensure the pressure balance of the two grinding areas; 2. Mechanical seal and reliable sealing 3. Adopt electric, manual feed, convenient operation 4. The quality of pulping is stable, uniform and effective The device is widely used for straw pulp,waste paper pulp,the commodity striking pulp with the manual,electric operation automatical control system.It will realize constant energy consumption control or constant power control mode to strike pulp.accordingly,the striking effect will be ensured stanblity.
Application: the machine is made of special alloy steel with special alloy steel, and the material is very durable. The bottom knife adopts turbulent design to improve dissociation ability. Rotary knife adopts high reflow umbrella vortex design for various types of pulp board and waste paper. Intermittent operation, especially suitable for waste paper with high wet strength.
Use: used for shredding the pulp board, paper machine under the damaged paper and all kinds of waste paper Structural characteristics: can be used according to the raw materials of the corresponding operation mode, the use scope is wide Specification: 2m3-7m3 processing capacity: 15-600tpd
Use: used in the deinking process for the high concentration of waste paper Structural features: Compact structure, high rotation efficiency Three wire helical rotor tower type, can effectively promote the pulp cycle, increase the friction between the pulp fiber, which can realize high concentration of mild beating, relief fiber cloth broken impurities at the same time.
The working part is divided into cylindrical shape, and the whole sieve is revolving around the axis of the cylinder, and the axis is generally installed as a small angle. The material is fed from one end of the cylinder, the fine grade material is passed through the sieve hole of the cylinder work surface, and the coarse material is discharged from the other end of the cylinder. Cylinder sieve has low speed, stable work and good dynamic balance. But its screen is easy to clog, the screening efficiency is low, the work area is small, the productivity is low. Concentrator is rarely used as screening equipment. Application: Yts is usually device in pulp or magazine after centrifuges, it can screen out all kinds of light or heavy impurities whosee geometric shape are greater than 10mm such as plastics, rubber, sand, stone, metal pieces, film, etc. Design f eature: Yts is series drum screen consists of drum, belt driving device, catch wheel, drawing wheel, vat, inlet trough, spravy pipe, etc.While the screening drum rotates, pulp is conveying forword to the drum cylinder by screw flight.By gravity, accept and fine impurities passing though 8-14mm screening slots enter the vat.The fiber adhered to the impurities retained on screen plate is pushed forward to the end by screw flight.The fiber adhered to the impurities is wash off by fan nozzles in order to prevent fiber loss with impurities discharging. Simple structure , safe and reliable in operation and high effciency in coarse screening. Used with hydrapulper system to screen out coarse impurities and improve the purifying efficiency of process.
Benefits Cleaner pulp High processing capacity Low operating costs Products Scope: Pore size deviation:+-0.05mm Chroming thickness is 0.20-0.30mm Plate area:0.40-23m2
1. The pressure screen adopts the structure design of the bottom, bottom discharge slag and top row slag, which effectively solves the above problems. Light impurities and the air in the slurry naturally rise to the top discharge outlet, the heavy impurities enter the body to the bottom out. In this way, on the one hand, it can effectively shorten the residence time of impurities in the sieve area, reduce the possibility of impurity circulation, and improve the screening efficiency. On the other hand, it can prevent the damage caused by heavy impurities to the rotor and sieve drum, and prolong the service life of the equipment. 2. Structural characteristics 1, sieve drum: fine sieve drum sieve sieve seam width h0.15 mm, use water jet cutting technology grooving on 8 mm thick steel plate, no burr forming excellent round hole and slot, won't produce stress and like mechanical washing grinding groove groove end fracture. It can also provide hard contact process to improve wear resistance. 2. Rotor rotor: the rotor is equipped with 3-4 rotor blades, and the balance is strictly calibrated after assembly. It is the rotor that does not produce vibration when rotating at high speed. The rotor is mounted on the main shaft, and the rotor is mounted on the rotor through the screw rod. The gap between the rotor and the sieve drum can be adjusted. The coarse - screen rotor adopts drum - type external rotary-wing structure and corrects dynamic balance. This structure prevents the impurity winding rotor from affecting the normal work of the equipment. 3. Outer shell: consists of upper cover and barrel body. The lower part of the tube is cut into the plasma pipe. The center of the barrel is provided with a slurry pipe. The top cover is equipped with a slag drain and a flushing nozzle. 4. Transmission device: including motor, pulley, v-belt, belt tensioning device, spindle and bearing. Process customization: brand: Model: uv102 material: stainless steel
Work environment - 20 â?? ~ + 120 â?? temperature conveying speed of 0.4 m to 15 m/min maximum weight 800 kg/m2 Chain material: carbon steel, stainless steel, thermoplastic chain, according to the needs of your product to different width, different shapes of chain plate to complete the plane transport, plane, ascending, decline, etc. Chain plate specification: the width of the straight chain plate is 63.5, 82.5, 101.6, 114.3, 152.4, 190.5, 254, 304.8. The width of the turning chain is 82.5, 114.3, 152.4, 190.5, 304.8. Features: 1. The conveyor surface of the chain conveyor is smooth and smooth, the friction is small, and the material is excessive and stable between the conveyor line. 2. The chain has stainless steel and engineering plastic materials, which can be selected according to the conveying materials and process requirements, which can meet different needs of different industries. 3. Large conveying capacity can carry a large load 4. The conveying speed is accurate and stable, ensuring accurate synchronous delivery
Powerline UNO is the prevailing and most widespread type of braided coreless paper carrier rope.It is made of multifilament polyamide fibre with special impregnation.It is characterized by easy splicing,high abrasion resistance and temperature resistance,as well as durability in drying sections. Paper carrier tape is braided by special fibre,which is characterized by high abrasion resistance and temperature resistance.It can be produced by customer's requirement,such as width,thickness and length. Flexible sling is the best equipment to lift and carry scroll.It has the unique soft protector,which can avoid scrol from being damaged.It can be produce by customer's requirements,such as length and string with different weight capacity. The paper carrier rope is made of multifilament polyamide fibre with special impregnation-supercoating,featured with low elongation and low abrasion