scription of mortar production line: I. This line has simple structure ,flexible production process and low cost.Equipments on this line are easily repaired and replaced. II. The raw materials for mortar are mainly sand,cement,flyash and limestone.They are very cheap, thus,give more additive value to mortar.Over all,this line is of high profit and is the best choice for investors. Models of mortar production line: Type Model Mixer/KW Capacity T/Need area/m*m FRQ: 1.How many kinds of mortar can this line produce? A: There are more than 16 kinds of mortar and this line can produce about five of them. If you want to produce even more,we can also offer. 2.How many person needed in this line? A: 3-5 workers will be enough to operate this line. 3.Is the line full-automatic? A: Yes,we can custom as your need. 4.Whats the difference between full-automatic line and semi-automatic line? A:(1)Sem-automatic line need manual help to upload materials,while full-automatic line need not. (2)semi-automatic line may not need material silos,full-automatic line need. (3)Semi-automatic line is relatively cheaper than full-automatic line. 5. Is it including packing machine? A: Yes. 6. How many types of mortar production line is there? What¡¯s the difference? A:(1)Normally,three. Vertical type ,block type and workshop type. (2)Normally: vertical type:the height of this line is big more investment of steel supporting structure Block type: more factory area less steel supporting structure Workshop type: install in a workshop and the height should be low 7.What is factory area needed?. A: It depends on the line type. 20-200m*m will be enough 8.Is it only dry or can make wet also? A:This line is most suitable for dry mortar and can mix wet mortar with 16% moisture. 9.What¡¯s the total power consumption (KW)? A:It is about 50KW. It is widely depends on the capacity and number of raw materials. 10 What¡¯t the capacity of the line? A:2-50ton per hour. 11.What¡¯s the guarantee period? A:12 months. With in this 12 months we take care of all the problems occurred, after that we offer repair and maintain service. 12.Can you install in my country? A:Yes, we offer oversea installation service. 13:Can you teach us how to operate this line? A:Yes.We offer training service free of charge. 14:What¡¯s the delivery date? A:30 days. 15: Whats the payment term? A:TT and L/C. 16.Can you delivery to my port? A:Yes,no problem. 17:How can I inspect the line before shipment? A:You can inspect by yourself or you fine someone inspect for you. Materials for mortar: 1.Cementing material: cement, lime, plaster. 2.Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite. 3.Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc. 4.Water-retention and thickening material. 5.Chemical additives. Production process: 1.Raw material storage 2.Raw material convey and weigh 3.Addition and weighing of additive 4.materials mixing 5.finished mortar storage and packing 6.Other device: dust collection system+air compressor system+PLC electric controlling system+steel supporting system Wood case
With dual shaft dispersers, two toothed dispersing discs, can mix material of various viscosity more efficient Normal
Specifications1.broad application2.10 years experiences in research3.professional manufacturer4.famous brand Model ,Host Power KW,Annual Capacity,Host Volume M3,Floor Space m2 LJWZ--05,7.5,0.54-1.8,0.5,20-100 LJWZ-10,11,1.08-3.6,1.0,20-100 LJWZ-20,18.5,2.16-7.2,2,20-100 LJWZ-25,19,2.7-9.0,2.5,20-100 LJWZ-30,22,3.24-10.8,3,20-100 normal
clay brick machine personalized rimer high output12000-25000 low power,energy-saving solid brick China professioal clay brick machine manufacturer, not only supply clay brick machinery but also turnkey project, we also have own brick factory, welcome you visit our brick machinery company and brick company!
Main parameter: 1.Load capacity:2000kg/1500kg/1000kg per cage 2.Independence height:15m 3.Lifting speed:33m/min 4.Max lifting height:150m 5.Person capacity:24 per cage 6.Cage dimensions:3*1.3*2.4m 7.Section dimensions:65.*65.*1508mm 8.Safety breaker type:SAJ3.0*1.2/SAJ4.0*1.2 9.Motor power:11*3/15*2kw Construction hoist seaworthy construction container
Box Feeder For Brick Production Line As Material Supplying Machine Brick Plan Machine, Brick Making Machines for Automatic Brick Plant
Clay Brick Making Machines are perfect for producing red clay bricks with a comprehensive range of features. It is made with 18 Ton weight and is certified with ISO 9001. This machine provides a capacity of between 10000-20000 B/hr, allowing for efficient and reliable red brick manufacturing. The main function of the Clay Brick Making Machines is to make red color clay bricks. It is a fully automatic clay block making machine and clay brick production line which is designed for providing high quality and durable clay bricks. The Clay Brick Making Machines are equipped with advanced technology and features such as automatic brick forming and auto pallet feeding, allowing for easy and smooth production of red bricks. It is an ideal solution for red brick manufacturing businesses that are looking for a reliable and cost-effective machine to produce high-quality red bricks. The Clay Brick Making Machines are designed to be energy efficient and provide a low cost of production. With its advanced and innovative technology, the Clay Brick Making Machines are the perfect choice for any red brick manufacturing business. This machine is designed to be durable and reliable, making it an ideal choice for producing red bricks efficiently and cost-effectively. It is the perfect solution for producing high-quality and durable red bricks. JKY55 Double Stage Vacuum Extruders can extrude out the materials into the mud column at the vacuum condition. The working pressure is 0.092MPa, extruding capacity can be 20000 bricks per hour, calculated as 240*115*53mm standard solid bricks. Raw materails can be clay, shale, coal gangue, river sludge, contruction waste, etc. Double stage vacuum extruders are the perfect choice for the clay brick manufacturers.
Dry mortar production line equipment.
construction hoist.
Construction machinery .
Tower crane, construction machine, machinery tower, hoist machine.
Brick machine, clay brick machiner, red brick machine, brick cutting machie, brick setting machine.
Concrete floor cutting machine Easy to move Easy to handle Kerf straight High efficiency Specification: Saw diameter: ,166;,181;700mm Maximum cutting thickness: 250mm Maximum cutting length: 1200mm Power: 11kw Rotate speed: 1400r/min Capacity of water-box:100l Haitian is an experienced factory to manufacture construction machines such as hollow concrete floor board forming machine, lightweight panel forming machine, cutting machine, concrete mixer etc. We can also adjust or design machines at the precise demand of the customers. Standard wooden case.
Lightweight wall panel concrete machine-hqj 90x600 1. The concrete product produced by hqj machine can be used As internal walls, external walls, roof of houses with the materials of cement, sand and aggregate. 2. Hqj panel machine is a movable producing panel machine which need simple platform to move during producing. 3. Steel wire of 2mm diameters are put inside the panel in advance before producing 4. Reamer is made of hight strength alloy. 5. Machine original materials is of high and good quality, special and professional productive technogloy to ensure you the best machine in the industry. Standard wooden case.
The products: the concrete hollow core board can be used as the floor in the buildings. They are stout with many steels inside. With smooth surface, solid construction, high strength and precise dimension, the hollow core slab meets all the national specification requirements. The machine: the precast cncrete slab machine produced in haitian is the best concrete components with top technique in china. There is the vibration set inside the machine which can help form slabs faster. The precast concrete slab forming machine is well designed, easy to control, maintain and repair. The company: haitian is a professional producer of precast concrete slab forming machine. Our company can design and manufacture various kinds of concrete structures molding equipment according to customers' demand. Configuration of tw120*1200: Pre-cast concrete core slab extrusion forming machine Type: tw120x1200 Thickness of slab: 120mm Width of slab: 1200mm Molding speed: ,161;,221;1.2m/min Number of holes: 10 Hole diameter: ,166;,181;87 Main power: 11kw Vibration power: 2kw Overall size: 2190x776x892mm Weight: 2.25t Seaworthy package.
The machine is mainly used to make the beam of house or building. The machine is making the beam through mechanical squeezing. It use the vibrator to compact the beam and make the cement, sand and stone etc. Fastening together. Concrete beam forming machine: We are having many types of the beam forming machine, different model can produce different kinds of beam to make different building. Seaworthy package.
1. Steel wire of 2mm diameters inside 2. Good choice for boundary wall 3. Save labor only3 to 4 workers needed 4. Good productivity of 1.6m/min in length of wall panel Technical parameters: Thickness of panels: 90mm Width of panel: 600mm Molding speed: ,161;,221; 1.4m/min Capacity: more than 500m,178; /8h Motor power: 4kw Vibration power: 0.8kw Panel weight: 70kg/m,178; Dimension: 2470*950*680mm Mass: 1031kg Standard wooden case.
Stripe cutting capacity:ín16 stripes/min Blank cutting capacity:ín25000 pieces/hr Gas source pressure:ú+0.6mpa Power of feeding strip motor:5.5/1.5 kw (1)product description: zqpq series automatic blank cutting system is mainly used to cut mud which is squeezed from extruder into qualified clay brick during sintering brick production. The system is the new vertical stripe cutting and blank cutting system designed and developed independently by our factory which adopts advanced automatic control, combing with photoelectric, close positioning, pneumatic and electric servo systems and etc. It has advantages of high accuracy, easy operation, and simple maintenance and so on. (2) Advantages: the original domestic patent product, with features of small mud, high yield and low power, etc. As requirement
Production capacity:15-50 m3/hr Linear speed of conveyor belt:6m/min Motor power:5.5kw Product description: gd series box-type feeder is the feeding equipment used to balance and ration during brick production. The rotary mud making rod of this equipment can crush the comparatively large soft materials. As requirement
Production capacity:20-80 m3/hr Working width of chain plate:680mm Motor power:3kw (1) product description: gl series plate feeder is the intelligent automatic feeder of stepless speed regulation type which was designed and manufactured by our factory on the basis of absorption of advanced structure of intermittent feeder. The electric motor adopts ytps series variable-frequency motor and the speed-adjusting range is 100-912 / min. The control system can be set into automatic and manual modes according to users ' needs: the automatic state should match the material quantity control systems of automatic cutting and extruding machines of our factory so as to achieve the automatic control for whole process line; the manual state adjusts feeding speed by potential or control panel, which has simple and convenient operation and smooth-running chain plate; the built-in computer can automatically set acceleration and deceleration time according to the load state of motor to achieve í¦fuzzy optimal acceleration and decelerationí¦ control. (2) advantages: rational structure, low failure rate, convenient maintenance; the control system can automatically choose optimal operating mode according to the load state of motor, so that the motor operating loss is at lowest and can save electricity over 60 percent. It is the most advanced energy-saving feeding equipment in domestic building material industries. As requirement
