ReTi Metal supply: Tantalum rod, sheet, plate, tube, wire, component Tantalum-tungsten rod, sheet, component. ReTi Metal supply: Tantalum rod, sheet, plate, tube, wire, component Tantalum-tungsten rod, sheet, component.
Hip high pressure tubing is drawn cold, seamless, stainless steel and is supplied in the 1/8 hard condition. Tensile strength is appro. 40% higher than that of annealed tubing. Tubing size(o.D.) in 1/8", 3/8", 9/16"
Uses physical chemistry performance fine PA-12 is the material production. Nature light, soft, pressure resistance, has good bears the stress dehiscence and the dynamic fatigue, has in the nylon the minimum water-absorptive, its product size stability high service life is long, can in - 40íµ~+100íµ the temperature range the normal work, the oil resistance be prominent, size stable performance. Mainly uses in the automobile petroleum pipe line, the brakes tube, the pressure tube, the solenoid and as well as in the air operated outfit pneumatic tube. Its good overall performance is the copper pipe, the steel pipe, the rubber pipe is unable to compare, is the substitution copper, the steel, the rubber ideal material, and installs easily, easy to operate. The PA12 nylon tube specification is as follows: 4í-2.5 5í-3 6í-4 7í-5 8í-6 10í-8 10í-7.5 12í-9 14í-11 16í-13 18 í-15 Note: 1. Material density 1.05íß1000 kilogram/cubic meter. 2. Working conditions: a. Pneumatic system - 40~+100. B. Compressed air. or pneumatic brake system - 40~+60.
Size: from 15mm*15mm to 100mm*100mm Thickness: from 1.00mm to 5.00mm Length: 4m to 12m Surface treatment: hot dipped galvanized.
PTFE tube 1) Used as insulated cover for corrosive gas and liquid 2) Acid and alkali resistant 3) Has the best electrical properties among plastics 4) Over 50 molds are available 5) All sizes available on customers'request all sizes available
The pu tubes are mainly used as spring and punch mould functioning buffering or damping parts. As elastic parts, they are mainly used in the punching machine and other similar machines. They could not only protect the equipments but also assure the quality of the moulds. Pu rod also widely used in other industries. Specification: Dia: 10mm-300mm length: 300mm (dia: 8mm-300mm), 500mm (dia: 18mm-300mm) and 1000mm(dia: 30mm-300mm) hardness: 78a-85a or above 85a Color: natural color or red, black or any color as per your requirements. Material: polyester or polyether, ptmg.
Tube diameter: from 13mm to 50mm Tube length:from 30mm to 300mm Tube thickness:22--28ª8 Carton
These pipes are widely used for mechanical pipe, high pressure pipe, steel pipe for automobiles, cracking pipe, hydraulic pillar pipe and so on. ASTM A179, A192, b10, A213, A519, A106, A53; DIN 2391, DIN 1629, DIN17175; API 5L, API 5CT; GB/T 8162, GB/T 8163, GB/T 3087, GB/T 5310, GB/T 9948
Working pressure:0-10BAR Min.burst pressure:26BAR Temperature range:-20íµ~80íµ Color:black,blue,yellow,green,purple 100m/roll 200m/roll
Operation temperature: -50 to +125 Celsuis. Security: used to protect switch systems up to 1kV and can reduce the distance to ground. Convenience for application: the continous length as supplied make the application more conveniently and economically. ZRG series products were recognized as jiangsu province high and new technical product in 2000, its product number:000500G0030N. Specification: 1.Tensile Strength: í¦12 Mpa 2.Ultimate Elongation: í¦400% 3.Tensile Strength After Aging(After 7 Days Air Oven at 158Celsuis): í¦10 Mpa 4.Elongation After Aging(After 7 Days Air Oven at 158Celsuis):í¦300% 5.Deformation Test(131Celsuis\1): í_25% 6.Heat Shock 250Celsuis: No Cracking 7.Conductor Corrosion(After 7 Days Air Oven at 158Celsuis): No Corrosion 8.Volume Resistivity: í¦1014 ª+.cm 9.Dielectric Strength: í¦25 Kv/mm 10.Dielectric Withstand After Aging(After 7 Days Air Oven at 158Celsuis): 2.5Kv\60sec. 11.Breakdown Voltage After Aging(After 7 Days Air Oven at 158Celsuis): í¦12 Kv 12.Cold Bend(-30Celsuis\1hr): No Cracking 13.Longitudinal Change(200Celsuis\3minute): +10% to -10% 14.Eccentricity: í_30% 15.Flammability: VW-1
Dasheng DRS-1 tubings are flexible, flame retardant and have a shrink ratio of 2:1. The tubings are certified by UL/CSA. They are used for a variety of applications from insulation to bundling and mechanical protection. The tubings are rated for 125 Celsius and are available in black, white, blue, green, yellow, red and grey colours. Other colours are also available on request. Technical Data 1 Tensile Strength: 13 N/mm2 2 Ultimate Elongation: 350% 3 Heat Shock @ 250 Celsuis: passes 4 Cold Bend @ -30 Celsuis: passes 5 Flammability: passes 6 Dielectric Strength: 15kV/mm 7 Volume Resistivity: 1x1014ª+*cm 8 Longitudinal Change: Inside +/-5% 9 Water Absorption:
Green stripe heat shrinkable tube
HTS Tubular Heat Shrinkable Sleeve
Heat shrinkable wraparound sleeve
No.1 Introduction: Galvanized Spiral Gas Drainage Tube is adopted international advanced production equipments by our company. Its galvanized with the inner and outside. It includes jointing spiral tube and without-jointing spiral tube. It has the following advantages: smooth inner wall, little resistance, light in weight, corrosion-proof, long service life, low cost, etc, it is the ideal equipment of Gas Drainage Tube in coal mines. The jointing spiral tube is adopted cast steel flange connection, the automatic welding technics for the connection of tube body and flange. Comparing with riveting technics, the technics avoids the second scathe to the tube body, and also with better capability of gasproof. Due to the techniques of riveting with the misdistribution of joints, and the improper installation is easily leading to rips of tube. Aiming to the point, our company meets track with international technics and adopts integrated welding technics to avoid the existence problems of riveting. No.2 Usage: The product can be widely used in mine ventilation, gas drainage, and road and bridge construction, housing structure, discharging lampblack, draining contamination and basic equipment installation, etc. No.3 Product Advantages: ú¿1ú¬. Comparing with the traditional glass steel gas drainage tube and steel gas drainage tube, the mine-use galvanized spiral gas drainage tube has the following advantages: 1. Light of the pipeline in weight and easy to convey. 2. High-grade galvanized steel belts used and there is no use to consider of the burning blockage and electrostatic-proof problems. 3. Widely applicable diameter range from 80mm to 1600mm. 4. Spiral hinge mouth increases the loading power and pressure from the pipeline. 5. Inner wall of tube is smooth, little resistance and good circulation. 6. Galvanization prolongs service life. 7. Adopting cast steel flange connection, easily assembly and disassembly, with good interchangeability. (2) Advantages of Galvanized Spiral Tube for Air-conditioner: 1. Good match with other products and high standardization. 2. Good capability of airproof. 3. Low wastage of aeration. 4. Convenient project checking. 5. Pressure resistance is better than ordinary tube and rectangle tube. 6. Saving material. 7. Low cost installation. 8. Elegance of integrated overall arrangement. 9. Convenient daily maintenance.
Pvc tube 1) rating: 300v or 600v 2) max. Temp.: 105c 3) material: pvc 4) approval: ul, csa 5) color: clear, black; other colors available on requests Carton
Additive volume size GEL 1-5ml 12/13x75mm GEL 5ml 13/12x100mm GEL 6-9ml 16x100mm EKTAK2 1-4.5ml 12/13x75mm EDTAK2 5-6ml 13/12x100mm EDTAK2 7-10ml 16x100mm EDTAK3 1-4.5ml 12/13x75mm EDTAK3 5-6ml 13/12x100mm EDTAK3 7-10ml 16x100mm Sodium Fluoride 1-4.5ml 12/13x75mm Sodium Fluoride 5-6ml 13/12x100mm Sodium Fluoride 7-10ml 16x100mm Fluoride Oxalate 1-4.5ml 12/13x75mm Fluoride Oxalate 5-6ml 13/12x100mm Fluoride Oxalate 7-10ml 16x100mm Heparin Sodium 1-4.5ml 12/13x75mm Heparin Sodium 5-6ml 13/12x100mm Heparin Sodium 7-10ml 16x100mm Heparin Lithium 1-4.5ml 12/13x75mm Heparin Lithium 5-6ml 13/12x100mm Heparin Lithium 7-10ml 16x100mm Sodium Citrate1:4 1-4.5ml 12/13x75mm Sodium Citrate1:4 5-6ml 13/12x100mm Sodium Citrate1:4 7-10ml 16x100mm Sodium Citrate1:9 1-4.5ml 12/13x75mm Sodium Citrate1:9 5-6ml 13/12x100mm Sodium Citrate1:9 7-10ml 16x100mm Plain tube 1-4.5ml 12/13x75mm Plain tube 5-6ml 13/12x100mm Plain tube 7-10ml 16x100mm
Steel grade: carbon steel (st37, st35, api 5l grb, astm a53/a106 grb) Alloy steel( t11, t22, t91, e355, e235) Size range: 30mm~325mm (based on different request from customers) Billet size: acc. To customer's request. Production capacity: 200000mt/year (based on different request) Type: a, dieschur set mill; b, accu roll set mill; c, assel set mill; d, automatical continuous rolling mill
Steel grade: carbon steel (st37, st35, api 5l grb, astm a53/a106 grb) Alloy steel( t11, t22, t91, e355, e235) Size range: 30mm~325mm (based on different request from customers) Billet size: acc. To customer's request. Production capacity: 200000mt/year (based on different request) Type: a, dieschur set mill; b, accu roll set mill; c, assel set mill; d, automatical continuous rolling mill.
Corrugated tube
