Flow: 15m3/h Head: 26m Power: 2.2kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. Shenlong pump Ltd is located at the beautiful shore of the Yellow River and at the foot of the mountains of Mangshan, ZhengZhou City in the heart of Henan province. The company was created in the 1980s, And after the company's combined relentless efforts has become one of the largest modern enterprises in Henan that combines Research and Development (R&D), Prototype Design, Product testing, Advanced industrial production, and operational excellence. Shenlong pump Ltd is a design manufacture export professional company. Our Enterprise is Ministry of Agriculture. We are production and sales pumps around the world. The manufacture have strong technical force, with all kinds of machine tools, planer, drill press, etc. and The manufacture's total land area of over 660000 Square meters and with in excess of 300 equipment sets. Employing 860 staff members; amongst them over 40 senior technical experts. The allocation of B-level exceeds the national standard of computer Pump testing centers.
Flow: 20m3/h Head: 64m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 15m3/h Head: 65m Power: 5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. .
Flow: 15m3/h Head: 80m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 30m Power: 3kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 40m Power: 4kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 54m Power: 5.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
P31:pressures to 3000 psi. Flows to 41 gpm high tensile grey iron, designed for high-torque applications with unique pressure balanced thrust plates that comtribute to optimized performance. P51:pressures to 3000 psi. Flows to 66 gpm high tensile grey iron construction, designed for high-torque applications with unique pressure balanced thrust plates that comtribute to optimized performance. P76:pressures to 3000 psi. Flows to 128 gpm high tensile grey iron construction, designed for high-torque applications with unique pressure balanced thrust plates that comtribute to optimized performance. Roller bearing pumps include models 020, 031, 051 and 076 Features: Pressure balanced thrust plates Durable high-strength cast iron body Contamination tolerant Volumetric efficiencies to 95% Applications: Material handling Turf care Agricultural Construction equipment Valve options: Pressure relief valve Load sense unloading bolt-on relief valve Priority flow divider Trade names: cast iron roller bearing pumps are also marketed under the commercial brand name.
Sqj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Products overview Sqj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions 1. Sqj submersible pumps use conditions: (1)380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. (2) Electrical cavity must be filled with water during operation. (3)the first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth. (4)the normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c. (5)water and sand content (by mass) of not more than 0.01%. (6)water ph 6.5-8.5. (7)the hydrogen sulfide in water content is not more than 1.5 mg / l.
Products overview Sqj, sqs, sqy, series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: 1.380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. 2.Electrical cavity must be filled with water during operation. 3.The first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth. 4.The normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c. 5.Water and sand content (by mass) of not more than 0.01%. 6.Water ph 6.5-8.5. 7.The hydrogen sulfide in water content is not more than 1.5 mg / l.
Cast iron or stanless steel blue qy oil immersed submersible pumps Qy oil immersed submersible pumps parameters: Flow range10~250m3/h, lift scope within 5~120m; Caliber scope 51~152mm, temperature range
Stainless steel submersible water well pump Submersible deep well pumps Sqj , sqs, sqy submersible pump series parameters Sqj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Sqs bearing submersible pumps parameters: Flow range10~250m3/h, lift scope within 5~12m; Caliber scope 30~150mm, temperature range
Qjr hot water submersible pump Flow: 10~500m3/h Lift: 15~405m Caliber: ?175~?400mm Power: 0.4-160kw Temperature: =140 ? Qualitycertificate: one year warranty and lifelong maintenance Qjr submersible hot water pump overview: This machine is used to deliver water. It has submersible motor and works under water. It is mainly used for farmland irrigation, water supply and water drainage in cities, factories and mines. Qjr series spring pump is widely used in special occasions like heating for warmth, physiotherapy, health care, earth energy utilization, etc. Its motor and pump are united into one. Its structure is simple, easy to install and disassemble, taking little floor space. It is easy to use and maintain, works safely and reliably, causing no pollution to water source. Qjr submersible hot water pump application range: 1. To collect hot water from boilers for secondary use 2. To collect water that leaks from heating pipelines in winter for secondary use 3. To collect cooling water in factories for secondary use (the pump should be submerged in water when working) 4. To deliver high temperature water through heat-supply system 5. To be used for heat-supply equipment maintenance 6. To supply hot water for bath center 7. To draw water from underground hotsprings, etc.
The product is manufactured according to the standard GB/T16750-2008. Application: Cable Rated voltage: 1.8/3---3.6/6kv Cable normal operating temperature between 90--250celsius degree Production range of cable: The cross-sectional area is 10-53mm2 and the core number is three. Type and designation:
Application: This product is suitable voltage level is less than 3kv/6kv of electric submersible pump until and the power cable connected to the supporting power supply. Operating characteristics: Cables rated voltage:1.8/3kv---3.6/6kv Cable minimum ambient temperature of not less than-50celsius degree. Cable normal operating temperature between 90--250celsius degree Cable minimum bending radius of not less than 30 times the thickness of cable. The structure of cable includes conductor, insulation, Kapton, lead sheath layer and armor. The production range of cable :the cross-sectional area is 10--20mm2 and the core number is 3. Type and designation:
Type: hydraulic vane pump Model Number: VP-SF-15-D (VP-15-FA3) Brand Name: JUN LING Place of Origin: Guangdong, China (Mainland) pressure range: 50--70 bar (kgf/cm2) displacement: 15 L/min shaft key: parallel key or spline shaft shaft diameter: 12.70 mm or 15.875mm flange size:: 82.55 mm parallel key spec.: 25mm length, 3.18mm width sauction port diameter: 1/2 " delivery port diameter: 3/8" drain port diameter: 1/4" weight: 5 kg
Type: hydraulic vane pump Model Number: VP-SF-15-D (VP-15-FA3) Brand Name: JUN LING Place of Origin: Guangdong, China (Mainland) pressure range: 50--70 bar (kgf/cm2) displacement: 15 L/min shaft key: parallel key or spline shaft shaft diameter: 12.70 mm or 15.875mm flange size:: 82.55 mm parallel key spec.: 25mm length, 3.18mm width sauction port diameter: 1/2 " delivery port diameter: 3/8" drain port diameter: 1/4" weight: 5 kg
C101/102 series pumps have operating pressures up to 172 bar (2, 500 psi) and speeds up to 4, 000 rpm. Pressure balanced thrust plates assure maximum efficiency under all operating conditions, contamination tolerant. Our dump body truck pumps products deliver the right flow range for most applications at 1800 rpm/2000 psi. Models with two shafts (c101) can be mounted to remote pto’s operating in either direction of rotation. Single shaft units (c102) mount directly to the vehicle drive train. These models can be connected in 2 or 3 line circuits to control single-acting cylinders. Offers reliable performance, pressure balanced thrust plates assure maximum efficiency under all operating conditions, contamination tolerant, serviceability/repeatability. All units are supplied with factory-set 2000 psi relief valves.
Wq series submersible sewage pump is mainly used for municipal works, industry bulidings, hotels, hospitals, civil air defence, mines etc. Trade to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various fabrics. Service conditions: 1.Based on impellers as center, underwater depth doesn’t exceed 5m, 2. Transferred medium temperature doesn’t exceed 40? 3. Ph: 4-10, it can not transfer liquid with high corrosivity 4. Max density: 1200kg/m3 5. Wq series pumps are submersible pumps. The motor must run under the water. Wq series pump incude 9 series as follow: 1. Wq submersible sewage pump 2. Wq(o type) submersible sewage pump 3. Wq non-blocking submersible sewage pump 4. Wqs water-filled submersible sewage pump 5. Wqx bottom suction type submersible sewage pump 6. Wqk cutting type submersible sewage pump 7. Wqjy automatic mixed type submersible sewage pump 8. Wqx big flow quantity type submersible sewage pump for mining engineering 9. Wqd/wq whole stainless steel sewage pump
Os series single-stage double-suction split volute centrifugal pump Os axially split pump overview: Model os pumps are single-stage double-suction inter opened spiral casing centrifugal pumps.It is used to water transportation in water plants, air conditioning water circulation, building water supply, irrigation, drainage pump station, electric power station, industrial water supply system, fire-fighting system, and shipbuilding and so on. Os axially split pump material: Pump casing:casting pig, ductalloy, cast steel; Impeller: bronze, casting pig, silicon brass, stainless steel; Shaft: stainless steel, carbon steel; Seal-ring on pump casing:bronze, casting pig, silicon brass, stainless steel. Os axially split pump feature: 1. It has compact structure, nice appearance, good stability and it is easy to install; 2. The optimally designed and stable running double-suction impeller makes the axial force reduced to the minimum and it has a blade-style of excellent hydraulic performance. Both internal surface of the of the pump casing and the impeller's surface are extremely smooth after being precisely cast.They have a notable performance on ovapour-corrosion resisting and a high efficiency. 3.Bearing use skf and nsf bearings to guarantee a stable running, low noise ande long duration. 4.Shaft seal use burgmann mechanical or stuffing seal to ensure a 8000h non-leak running. 5.Installation does not need to adjust when assembly and it can be vertically or horizontally assembled upon the conditions of use on the spot.
