Diaphragm coupling is suitable for connecting two coaxial lines of medium and high speed transmission shafting. With certain axial relative offset compensation ability, smooth transmission, corrosion resistance and other characteristics, operating temperature -20 ~ 250 C, transfer nominal torque 40 ~ 315000N m
Construction Inner Hose PTFE Inner Hose Strength Stainless Steel Wire Cover PVC/PU,25 Colours Introduce Our Stainless Steel Braided brake lines are made from high quality 304 grade stainless steel.With a PTFE inner hose it means our stainless steel braided brake lines are very resistant to expansion under pressure and will not degrade from exposure to brake fluid.Finally our stainless steel braided brake lines are then covered in a abrasion resistant PVC/PU coating to protect the hose against chaffing .The stainless steel outer braid offers excellent resistance to heat,abrasion and mechanical damage and wll not absorb oil and fuel into its brading ,thus eliminating weight gain . Item Code Inner Hose Material Stainless Steel Type I.D(mm) O.D(mm) W.P(PSI) B.P(PSI) Expansion SAEJ1401-1 DAKIN PTFE INNER HOSE 304 3.2 7.2 4660 14000 0.05 cc/ft SAEJ1401-2 OUR FACTORY PTFE INNER HOSE 304 3.2 7.5 4660 14000 0.05 cc/ft
LANDYOUNG GRP jacking pipes is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines. DESCRIPTIONS LANDYOUNG GRP jacking pipes is manufactured in accordance with international standard using Helical FILAMENT winding process and Continuous FILAMENT winding process on computer controlled machines. GRP jacking pipe is designed to meet the exacting demands of pipeline construction and rehabilitation using trenchless micro-tunnelling and pipe-relining methods. Applications LANDYOUNG GRP jacking pipe is suitable for use in pressure, non-pressure and trenchless applications for potable, non-potable, industrial, drainage and wastewater systems. Water Sewage & wastewater Pipe-relining Road & rail culverts Asset encasement (e.g. protection for pressure pipelines) Ducts Advantages The GRP Jacking pipe has been engineered to deliver a range of features and benefits that make it suitable for the applications above, including: Superior axial compressive strength Excellent hydraulic performance Light weight and corrosion resistant Corrosion resistance Smaller tunnel diameter and reduced spoil volume Lower jacking forces required during installation Smaller entry/exit pits Longer drive lengths Faster construction time and lower installation costs Reduced environmental disturbance and social cost Product Range and properties Diameters: DN300 DN4000 Ring Stiffness: SN20,000 SN1,000,000 Coupling material: GRP, Carbon steel, Stainless Steel Pipe lengths: 1m to 5.8m (standard length 2m) Ultimate Compressive Strength: 85N/mm2 Jacking Force Safety Factor: 3.5 Colebrook-White Coefficient: 0.01mm
Water Rubber Hose Excellent Abrasion and Wear Resistance in Industries A water rubber hose is discharging waters for the river. WRH-01: Water rubber hose is widely used for industrial water discharging. Suction and discharge hose can not only sucking and discharging sands, gravel and bulk materials, it can also be used for water transferring, suction and discharging, which is named as water rubber hose. Water Rubber Hose, also named as water suction hose, rubber water hose and water discharge hose, is a type of rubber hose used for transferring and discharge water. Water rubber hose can be used in both positive pressure and negative pressure working environments for sucking and discharging industrial water and neutral liquid in normal temperature. It is widely used in mine, factory, agriculture, civil and architectural engineering. Additional, it can be used as water conveying hose for agriculture irrigating. Structure of the water rubber hose Inner layer. Synthetic rubber, such as NR, SBR, BR and other abrasive resistant rubbers. Reinforcement layer. Braided textile fibers or cord thread and spiral steel wire reinforcement. Outer layer. Synthetic rubber with abrasion and wear resistance smooth surface. Connection type.
Sandblast Hose - Abrasion and Wear Resistance for All Tough Cleaning Applications A worker holding the sandblasting hose connected with machine is shotting sand. SHP-01: Sandblasting hose is widely used in coal mine industries and other fields for derusting. Suction and discharge hose features excellent abrasion resistance, it is mainly used to deliver abrasive materials, such as sands, gravel and other bulk materials. Here, we will introduce the sand blast hose, which is specially designed for sand transferring and discharging. Sandblasting hose, also called sand blast rubber hose and flexible reinforced sand blast hose, it is a type of suction and discharge hose for sand blasting with air compressed machine. Rubber material make the sand blast hose excellent abrasion resistance and durable life. The sand blast hose can be added with flanges, which make it easy to install and dismantle onto pipeline tightly. Different from others rubber hoses, which the reinforcement layer is fabric or steel wires or meshes. The discharge and suction hoses including sandblasting hose are composed of both cord thread or fabric and spiral steel wire as the reinforcement layer. Sand blast hose is widely used in the water & electricity, mining industry, military defense and other fields for derusting, sand reclamation and other applications. Structure of sand blast hose The sand blast hose has same structure with slurry hose and dredge hose, which is composed of three layers: inner layer, reinforcement layer and cover layer. Inner layer. High quality rubber for high wear and abrasion resistance. Main materials of inner layer is polyurethane and butyl rubber. The raw materials are added into special reinforcing agents, which make the inner layer high abrasive resistant, high toughness and high pressure resistant. The abrasive performance is equal to 2 or 3 times of traditional sandblasting pipes. Reinforcement layer. Suitable for both low or high working pressure conditions. Fabric reinforcement + steel spiral wire reinforcement. It is suitable for the low working pressure applications. Cord thread reinforcement + steel spiral wire reinforcement. It is suitable for the high working pressure applications. Cover layer. High quality rubber for anti-aging and wear resistance. Cover layer material is same to the inner layer, which is made from various abrasion and wear resistant synthetic rubber (NR, SBR, BR) for anti-aging and anti-wear performance. A cross section of sandblasting hose with Six layers of cord thread reinforcement. SHP-02: Sandblasting hose with cord thread and steel spiral wire reinforcement.A small piece of steel wire mesh and several steel spiral wires on the inner layer of hose. SHP-03: Details of spiral wire reinforcement of sandblasting hose. Specifications of sand blast hose Material: synthetic rubber, such as NR (natural rubber), SBR (styrene butadiene rubber) and BR (butadiene rubber).
Oil Rubber Hose Low Abrasion Loss and High Safety Factor A machine and several workers is placing the oil rubber hose on the boat. ORH-01: Oil rubber hose is widely used for deliver oil in the wharf. Oil rubber hose, also called rubber fuel oil hose, flexible reinforced oil hose, fuel oil discharge hose, is a type of flexible hose for suction, discharge and delivery of oil with aromatic content. Compared with water rubber hose, the oil rubber hose has inserted copper wire for ground connection and eliminating static electricity. The inner and outer rubber material has excellent oil, abrasion and wear resistance performance. Additional, it has up to 60% aromatic content resistant performance for heavy duty applications. Besides, the oil rubber hose can be customized into armoured hose or added with steel spiral wires to improve the abrasion resistance performance and extend service life.
Some hoses tend to get brittle if they spend too much time in the hot sun or freezing weathers, the service life of garden hose is short. The garden hose we supply has excellent weather resistance performance to be used in harsh environments. Additional, the garden hose we supply is abrasion and wear resistance and high strength to extend the service life of garden hose. https://www.suction-hose.com/dredgesuction/garden-hose.html Garden hose can be divided into PVC garden hose and rubber garden hose according to the raw material.
Gravel Suction and Discharge Hose for High Pressure Environment https://www.suction-hose.com/dredgesuction/gravel-suction-discharge-hose.html Dredge suction & discharge hose can be used for gravel transport ship to deliver gravel in many places, and this is the so-called Gravel Suction and Discharge Hose. Its outstanding feature is that it has excellent abrasion resistance, so it works well in delivering gravel which is highly abrasive. Gravel suction & discharge hose is composed of three parts: tube, reinforcement and cover. Tube is made from synthetic rubber (NR, SBR or BR), making hose resistant to abrasion and corrosion. Reinforcement is made from high tensile spiral steel wires, making hose resistant to kink and fatigue. Besides, the high tensile reinforcement makes hose have solid structure and bear high working pressure. Cover is made from high quality synthetic rubber (NR, SBR or BR), making hose resistant to abrasion, corrosion, weather, ozone, aging and heat. The hose can be connected to pipeline tightly by flanges. And it has excellent flexibility.
Slurry Suction and Discharge Hose with Excellent Flexibility Dredge suction & discharge hose can be used for slurry dredging in many places, such as river, lake and sea, and this is the slurry suction & discharge hose. It is mainly used for slurry suction, delivery and discharge. Slurry is abrasive, so slurry suction & discharge hose is highly resistant to abrasion. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber, such as NB, SBR and BR, making hose resistant to abrasion and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to kink and fatigue. And the high tensile reinforcement makes hose suitable for high working pressure environment. Cover is made from synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, weather, ozone, aging and cut. The hose has excellent flexibility and it can be connected to pipeline tightly by flange..
Slurry Suction and Discharge Hose with Excellent Flexibility Dredge suction & discharge hose can be used for slurry dredging in many places, such as river, lake and sea, and this is the slurry suction & discharge hose. It is mainly used for slurry suction, delivery and discharge. Slurry is abrasive, so slurry suction & discharge hose is highly resistant to abrasion. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber, such as NB, SBR and BR, making hose resistant to abrasion and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to kink and fatigue. And the high tensile reinforcement makes hose suitable for high working pressure environment. Cover is made from synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, weather, ozone, aging and cut. The hose has excellent flexibility and it can be connected to pipeline tightly by flange..
Sewage Suction and Discharge Hose for High Working Pressure Environment Dredge suction & discharge hose is resistant to abrasion, so it can be used to deliver sand, slurry and gravel. It is resistant to corrosion, so it is also used to deliver corrosive sewage, and this is sewage suction & discharge hose. It has excellent flexibility and it can be connected tightly to pipeline. Its structure is similar to slurry suction & discharge hose and seawater suction & discharge hose. It is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to corrosion and work well in delivering sewage. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to bending and fatigue. And sewage suction & discharge hose can bear very high working pressure due to the high tensile spiral steel wire reinforcement. Cover is made from NR, SBR or BR, making hose resistant to corrosion, abrasion, weather, ozone and aging.
Port and Dock Construction Hose Suitable for High Pressure Conditions Dredge suction & discharge hose can be used for abrasive and corrosive materials delivery, and it is also used for flood discharge. Besides, it is also used for port and dock construction and this is port and dock construction hose. It is very flexible and it can be connected to pipeline tightly by flanges. And it is highly resistant to abrasion, corrosion and seawater, so it is becoming more and more popular in port and dock construction. Port and dock construction hose is composed of three parts: tube, reinforcement and cover. Tube is made from high quality synthetic rubber (NR, SBR and BR), making hose resistant to abrasion and corrosion. Reinforcement is made from multiple layers of high tensile spiral steel wires, making hose resistant to bending, kink, fatigue and wave. Besides, reinforcement makes hose have solid structure and suitable for high working pressure environment. Cover is made from synthetic rubber (NR, SBR and BR), making hose resistant to abrasion, corrosion, seawater, weather, ozone and aging.
Figure 100 hammer union is black nuts yellow parts. These hammer union with precision machined metal-to-metal sealing surfaces. Recommended for low-pressure manifold line connections and application in air ,water, oil and gas. Service the working pressure is not more than 1000psi. And we can be produced according to customer requirements . Feature: Pressure-tight make-up with hammer Economical low-pressure union Manifold and line connections The detail of fig100 hammer union: Working Pressure:1000PSI Size : 2â??â??-8â??â?? Union color : black nuts yellow part Material : SF
Home > products > plastic coated corrugated pipe Hot dipped plastic coating steel corrugated pipes A green plastic coated steel corrugated pipe in integral style with flange plates is placed on the floor in the workshop. Hot dipped plastic coated steel corrugated pipe in integral style Hot dipped plastic coating steel corrugated pipe is a new kind of products. And our company is the one and only manufacture of this product domestic at present. We have already applied for a patent certificate. The base material of this pipe is steel and the interior and exterior surface sides is coated polyethylene (pe) or epoxy (ep). It enjoys the advantage of both plastic pipes and steel corrugated pipes. The advantage contains high mechanical strength, anticorrosion, easy installation, quick construction, long using life etc. It is very suitable for buried pipes instead of cement pipes and box culvert. It is the national popularized environment protection product. Usage Municipal engineering and construction: civic buried water (rain or sewage) drainage, utility tunnel, cable protection, checking well, tower crane cofferdam, vertical pile shell. Road and railway: culvert, passage, bridge, tunnel overhaul, temporary road, leakage well, etc. Coal mine: minerals transferring pipes, passages for persons and machines, mine shaft, etc. Public construction: power plan flue pipes, granary, cement bin, gasometer, fermentor, wind, turbine corrugated steel sleeve pipe, etc. Martial use: military channel, air defence channel, exit channel. Product advantage The hot dipped plastic coating steel corrugated pipes have both rigidity and flexibility. The construct is reasonable for loading. The loading to it will be uniform distribution. It is deformation resistant. The strength of hot dipped plastic coating steel corrugated pipe is much higher than similar type common plain pipes. The construction use this pipe can save much material and reduce works invest cost.
Spiral rib pipe can solve your storm water problems with the improved hydraulics Spiral rib pipe is our innovative flexible metal pipe that combines the proven strength of corrugated metal pipe with the flow capacity of a smooth inner wall. That is to say the product has two layers: the first layer is a smooth interior corrugated steel pipe and the second layer is a smooth steel liner providing for improved hydraulics. It is also called smooth wall spiral rib pipe or double wall corrugated steel pipe. It is economical and easy to install. It combines the advantages of many piping varieties into one revolutionary product. Spiral rib pipe is lightweight, easy to use and install, high strength, long-lasting and with superior performance therefore it is the perfect pipe that used for storm water sewer systems, culverts and drainage systems.
BOP Hose Blow-out preventer (BOP) systems requiring high pressure, high temperature and flame resistant control lines certified to API 16D. Armored hose assemblies with flame resistant cover withstand minimum 1300°F (+700°C) flame temperature at working pressure for 5 minutes without failure.
Fracking Hose(TPU Layflat Hose) Fracking hoses are high pressure, strong polyurethane lay flat discharge hoses designed for aggressive water pumping around mine and drill sites. The fracking hose has been designed to assist with mine dewatering where the constant movement of pumps and surface equipment makes rigid and semi-rigid piping a problem. Being totally lay-flat, this product is light-weight and easy to handle. The transfer of the fracking hose to the deployment system is fast and easy. The fracking hose is spooled from the packing onto the reelers for easy deployment. Using the hose reelers, hose can be deployed along haul roads or down the pit wall. Pumping can begin in a matter of hours instead of days.
Composite Hose Composite hose, like other hose, provides the vital flexible connection to compensate for vibration, movement, or misalignment in a fluid transfer system. It can be used in delivery and/or suction of fuels, oils and lubricants in cistern trucks, railcars or fixed deposits.
Hydraulic hose is widely used in many industries, such as mine industry, machinery industry and hydraulic equipment. It is often used to deliver hydraulic liquids, such as hydraulic oil, fuel oil, lubricating oil and emulsified oil. It is also used in oil exploration and forging metallurgy. Besides, it is used in crane, mining equipment, ships, injection molding machinery, agricultural machinery and various machine tools. It can be used from low pressure conditions to ultra-high pressure environment. Hydraulic hose can be divided into five kinds according to the material: steel wire braid hydraulic hose, steel wire spiral hydraulic hose, fiber reinforced hydraulic hose, stainless steel hydraulic hose and thermoplastic hydraulic hose. They all have solid structure and they can bear high working pressure. We can manufacture hydraulic hose according to customers' requirements if our hydraulic hose specifications cannot meet their demand, such as hose material, length, hose inner diameter, working pressure and so on.
High strength, the inner surface is smooth (friction coefficient is small, the cable is light and smooth, no damage to the cable) , light weight (weight only 1/4 of steel pipe, concrete pipe 1/10 or so, transport is convenient, installation is simple) , not deformation. No galvanic corrosion, non magnetic, suitable for single core cable laying, will not produce eddy current. Good corrosion resistance, high water or seawater erosion performance. Heat resistant, can be used in 120. Insulation, corrosion resistance, no rust, the service life of 50 years or more do not have to maintain, a benefit for life. D=100~200mm Nude packing
