Performance characteristics of ultra-high power graphite electrode in 400 arc furnace Our products are characterized by high strength, good electrical conductivity, good thermal shock resistance and low consumption, and are widely used in metallurgical, chemical and mechanical industries. 50 % of the products are sold well in 30 provinces, cities and autonomous regions in China, and 50 % are exported to more than 30 countries and regions including Southeast Asia, Japan and South Korea, Europe, the Americas, and Africa. Technical parameters of ultra-high power graphite electrode in 400arc furnace Specification for the Use of Ultra-High Power Graphite Electrodes in 400 Electric Arc Furnace Points to note for the use of graphite electrodes: 1, wet graphite electrode, dry before use. 2, remove the foam protective cap on the spare graphite electrode hole, check whether the inner thread of the electrode hole is complete. 3, clean up spare graphite electrode surface and hole thread with compressed air without oil and water; Avoid cleaning sand cloth with steel or metal brushes. 4, carefully rotating the connector into the electrode hole at one end of the backup graphite electrode(it is not recommended to load the connector directly into the electrode removed from the furnace), not to collide threads. 5, the electrode hanging equipment(recommended graphite hanging equipment) into the electrode hole at the other end of the backup electrode. 6, when lifting the electrode, loosen the soft material to the bottom of the end of the standby electrode connector to prevent the ground from hitting the connector; Lift the pendant ring with a hook, and the lifting electrode must be stable to prevent the electrode from loosening from the B end or colliding with other fixing devices. 7, hanging the spare electrode to the top of the electrode to be connected, pointing at the electrode hole and slowly falling; Rotate the backup electrode so that the spiral hook rotates with the electrode to drop; When the two electric extremes are 10-20mm apart, the exposed parts of the two ends and joints of the electrode are cleaned again with compressed air; When the electrode is finally completely decentralized, it must not be too violent. Otherwise, due to violent collisions, the electrode holes and joints will be damaged.
Graphite electrode is mainly applied for metallurgy industry and calcium carbide, phosphor-chemical enterprise, such as iron and steel smelting, industrial silicon, yellow phosphorous ,ferroalloy, titania slag, brown fused alumina etc submerged-arc furnace melting production. Typical Properties of Large-size Graphite Electrode. Diameter:600mm-1400mm Length: 1850mm-2400mm 1600$-4050$ per ton Pakage:wooden Notice: 1. Electrodes should be stored in a clean and dry place avoiding vibration and collision. It should be dried before use . 2. When connecting the nipples, the user should clean the hole with compressed air and then screw the nipple into it carefully without damaging the threads. 3. Before the electrodes are connected, cleaning the electrode tip by the compressed air when the two electrodes are 20-30mm away. 4. When the electrodes are connected by the wrenches, it should be fully tightened to the specified location that the gap between the two electrodes is less than 0.05mm. 5. To avoid the electrode breakage, please keep away from the insulation material blocks. 6. To avoid the electrode breakage, place the aniseed block on the lower part and set the small block on the upper part.
Xinhong carbon advantage: Strictly control of raw material ensures it is from the best origin; Advanced production technology & facilities &experienced workers; Strict quality tracing system to ensure each ge excels buyer needs; Technical assistance & after service are available whenever needed; Sufficient stock in factory to ensure competitive price&fast delivery; Graphite electrodes Graphite electrode is made of petroleum coke, needle coke, and bonding coal pitch. Its production process is: calcining, dosing, mixing, forming, baking and impregnation, graphitization in a high temperature of over 3000c, then precision machining. Graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(rp), high power(hp) and ultra high power(uhp). Graphite electrode is an important conductive material in smelting industry with good electrical conductivity, thermal conductivity and high mechanical strength, good corrosion resistance under high temperature. Graphite electrode is widely used in eaf, lrf, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace (such as the graphitization furnace, glass melting furnace and silicon carbide furnace etc). Packed in wooden crate or as your requirment.
Graphite electrode, mainly from the domestic petroleum coke and needle coke, is widely used in electric arc furnace, ladle furnace, submerged arc electric furnace for the production of alloy steel, metal and nonmetallic materials. Our graphite electrodes include regular power, high power, super high power and ultra high power. They are characterized by low resistivity, good electric and thermal conductivity, high resistance to oxidation and thermal shock, high mechanical strength, etc.We supply various dimensions and grades to meet customers requirements for the specific applications. We produce specifications general power graphite electrode graphite 100-600 ,high power,UHPï¼?700-960 average power electrode, ultra high power graphite electrode ,by 4100 large compressor pressure molding, baking and graphitization, machining for the integration of the production scale, the annual production of about thirty thousand tons, mainly serving the big steel mills and industrial silicon factory.
Graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(rp), high power(hp) and ultra high power(uhp). Graphite electrode is widely used in eaf, lrf, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace
The major products of our company include the Φ200mm1400mm ordinary graphite electrode, high power and ultra-high power graphite electrode and etc. Our graphite electrode is characterized by its high physical volume density, its super anti-press power, its low rate of electric resistance, and its strong anti-oxidizes. The quality of our product is recognized by the quality examination center of the national metallurgy carbon material sampling analyze to all attain the YB/T4088-2000YB/T4089-2000�YB/T4090-2000. -
The major products of our company include the Φ200mm1400mm ordinary graphite electrode, high power and ultra-high power graphite electrode and etc. Our graphite electrode is characterized by its high physical volume density, its super anti-press power, its low rate of electric resistance, and its strong anti-oxidizes. The quality of our product is recognized by the quality examination center of the national metallurgy carbon material sampling analyze to all attain the YB/T4088-2000YB/T4089-2000YB/T4090-2000.
The major products of our company include the 200mm1400mm ordinary graphite electrode, high power and ultra-high power graphite electrode and etc. Our graphite electrode is characterized by its high physical volume density, its super anti-press power, its low rate of electric resistance, and its strong anti-oxidizes. The quality of our product is recognized by the quality examination center of the national metallurgy carbon material sampling analyze to all attain the YB/T4088-2000YB/T4089-2000YB/T4090-2000.
The major products of our company include the î¦200mmâ??î¦1400mm ordinary graphite electrode, high power and ultra-high power graphite electrode and etc. Flexural strength, 10.5, Coefficient of thermal expansionâ?¤2.0, The apparent density, 1.64, The resistivityâ?¤6.3, Length:1000mm-2400mm; Diametre:200mm-1400mm; Apply:electrosmelting, eaf&lf Model number:rp, hp, uhp Brands:rt Country of origin:china The fob price, usd 7000-13400/ton Minimum starting quantity, 1�ton Terms of payment, l/c;d/a;d/p;t/t Delivery time, 20 days Port, tianjin Supply capacity, 25000 ton/year Packaging:in wooden cases or according to customers' requirements
graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(RP), high power(HP) and ultra high power(UHP). Graphite electrode is widely used in EAF, LRF, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace
graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(RP), high power(HP) and ultra high power(UHP). Graphite electrode is widely used in EAF, LRF, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace
graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(RP), high power(HP) and ultra high power(UHP). Graphite electrode is widely used in EAF, LRF, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace
graphite electrode is acting as a conductive body which release heat in the form of arc for heating and melting steel in the furnace.According to the application, it can be divided into regular power(RP), high power(HP) and ultra high power(UHP). Graphite electrode is widely used in EAF, LRF, submerged arc furnace(producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide etc), resistance furnace
The major products of our company include the Φ200mm1400mm ordinary graphite electrode, high power and ultra-high power graphite electrode and etc. Our graphite electrode is characterized by its high physical volume density, its super anti-press power, its low rate of electric resistance, and its strong anti-oxidizes. The quality of our product is recognized by the quality examination center of the national metallurgy carbon material sampling analyze to all attain the YB/T4088-2000YB/T4089-200YB/T4090-2000.
Valves, castings, manhole cover, sewer grate.
Metallurgy, nickel, cobalt, tin, lead, zinc, aluminum, copper.
Graphite electrode Dia:300mm Length:1800mm Resistance:7.7
graphite electrode HP300 1800mm with nipples 177T4N resistance 1.67
Seamless steel pipe special shaped steel pipe hexagonal steel pipe oxygen gun steel pipe checker plate coil plate container steel plate threaded steel pipe.
1.Quick Detail Place of Origin Chongqing, China (Mainland) Brand Name Chenguan Metal Copper Scrap Type Copper Wire Copper Content 99.99% Application Electric Wire Wire Gauge 0.6mm-1.6mm Alloy Or Not Non-alloy Purity 99.97%-99.99% Color Red Payment term 30%TT 70%BL 2.Supply Ability 1000 Ton/Tons per Month Renewable resources copper scrap/ metal copper scrap wire
