Product Description The Main Principle of Resistance Butt Welder and Main Advantages: 1. AC Resistance Butt Welding is the welding method that the end surfaces of two parts are pressed tightly, and the resistance heat is used to heat up the surfaces to the plasticized status, then the upsetting force quickly press them together more tight again or without applying the upsetting force pressure, just only hold on the welding pressure to complete the welding. 2. Compared to Flash Butt Welding, Resistance Welding is much easily to for worker use and operate, the cost is much lower, welding productivity is also higher. 3. The welded joint is smooth. And the welding burrs are small. 4. The structure is designed compactly which is very easily to be adjusted to weld different parts. The special butt welding control circuits ensure the welding quality. 5. Mainly used for butt welding various metal material with welding section area less than 250mm, such as iron, wires, pipes, etc. Main Technical Parameter: Technical Data Model/ItemRatedPowerMaximumRatedMaximumMaximumExternalWeight capacityinputshortdutyfasteningforgingdimension currentcycleforceforce KVAVHAA%NNmmKg UN1-2525380-50/60110002039001500900 800 1200280 UN1-3535380-50/60150002039001500900 800 1200310 UN1-5050380-50/60190002039001500900 800 1200350 UN1-7575380-50/60235001561002500900 800 1200400 UN1-100100380-50/60260001561002500900 800 1200435 UN1-150150380-50/603100015800030001350 800 16001350 UN1-200200380-50/603500015800030001350 800 16001450
Product description Un3 series copper tube and aluminum tube butt welding machines is one kind of resistance butt welding equipment specially designed for copper tube and aluminum tube inserting method welding, it can replace the high-voltage flash welding machine with lower and old technology. The system adopt programmable logic controller(plc) as the action logic controlling unit; adopt special microcomputer welding controller as the welding process control unit; adopt the high-quality aluminum alloy cylinder and high-precision oil bearings integrated with high-precision lathe lever to make precise machinery actions. It has the reliable welding quality, easy and simple control and adjustment, high productivity, no gas leakage phenomenon, and some other excellences. The computerized controlling box with input voltage and output current constant and balance system can guarantee the machine produce mass weld in the same shape and quality. Basic technical parameters: Power supply380~~480vac /50/60hz Rated capacity50kva-100kva Welding tube diameteraluminum tubes: 4.0-25.05mm +copper tubes: 4.0-25.05mm Clamping cylinder space30mm Horizontal cylinder space5-100mm(adjustable)
Product Description Main Features and Applications: 1. Automatic Argon Arc(Plasma) Straight Seam Welding Machine mainly includes two parts: specially designed Straight Seam Automatic Machinery Part and Standard Welding Source Part 2. According to different welding requirement of various materials , the Automatic Straight Seam Machinery Part can be designed into two kinds : Plate Type pressing Mechanism and Keyboard Type Copper Pressing Mechanism, to get the regular and stable clamping and cooling effect. 3. Standard welding Source Part includes TIG(tungsten inert gas shielded arc welding), MIG(metal inert gas shielded arc welding) MAG(metal active gas arc welding) SAW(submerged arc welding)PAW(plasma arc welding),etc, Automatic Machinery Part can be equipped by the standard welding source manufactured by our company , can also work with other well-known brands of welding power. 4. Automatic Machinery Part is adopted PLC control, DC motor drive has stepless adjustable welding speed and interfaces with any power source . 5. Weld Seam back up design has a groove to form a weld on the bottom of a welded plate and provide consistent gas flow to the back of the weld, to assure the stable gas shield and ensure double-side forming in single side welding. 6. Automatic Straight Seam welding Machine is mainly used for the high quality and low distortion automatic straight welding, such as metallic cylinders and aligned plates made with stainless steel , iron , aluminum and brass, etc. 7. Compared with the traditional manual welding way , high welding efficiency and speed, well welding quality and good consistency. Model:SSW-300SSW-500SSW-800SSW-1000SSW-1200SSW-1500SSW-2000 Input voltge:220V/380V/440V/480V,50/60Hz Max welding length: 320mm 500mm800mm 1000mm1200mm 1500mm2000mm Workpiece diameter:48-800mm60-80076-800mm85-800mm98-800mm115-800mm150-960mm Workpiece thickness:0.3-3mm/ 0.4-3mm Welding Speed:300-2000mm/min
Main Features 1. 1KHZ, 4KHZ, 8KHZ Inverter Frequency, highly precise welding control System. 2. Friendly interface:Welding paremeter adjustment and Welding Process LCD display. 3.Constant Welding Current, Constant Welding Voltage, Constant Welding Power, Welding Pulse Width, four kinds of control mode. 4. Three-Stage Welding Method, there is the fuction of welding Current Slowly Go Up and Down. 5. Can set Min and Max value for monitoring parameters. 6. The welding source has excellent interface functions and is equipped with RS232 communication connector to accept various weld control inputs. 7. Complete model, wide range of applications and widely used. Main Technical Parameters Model No.KIA-1KAKIA-2KAKIA-3KAKIA-4KAKIA-6KAKIA-10KA Rated Power(KVA)4610121625 Max Output Current1000200030004000600010000 Rated Duty (%)202020101010 Inverter Frequency(KHz)8/48/48/48/4/111 Welding Pulse Quantity333333 Welding Schedule Memory20Group20Group20Group20Group20Group20Group Dimension-L*W*H(mm)435*185*320435*185*320435*185*320460*400*300460*222*345460*222*345 385*200*300385*200*300 Weight(Kg)913131314.517 2829.5333435.539 1.why choose our factory ? Our company has advanced production equipment and strong technology. The producing process is under strict management in quality. Our products are sold around the world and highly thought of since excellent quality and perfect service at home and abroad 2.The advantage for product? High efficiency , energy saving and good quality. 3.The advantage for us ? Reasonable price and best services , advanced equipment and strong technology. 4.How to order? Do not hesitate to contact by online or Email as soon as possible once you are interested in our products. The specific quotation will be offered basing the request dimension and quantity 5. What about the quality? All products according to ISO and National highest standard, also we can offer CE, certificate if necessary. The machine have one year warranty. 6. What payment is available? L/C at sight, or T/T 30% deposits before production and 70% balance to be paid before shipment.
Model No.:RF-12DR Description:Pittsburgh Lock Thickness Range Used:0.5-1.2mm(18-27ga) Material:45mm Size:13.2mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C INQUIRY ONLINE
Model No.:FDFA-ZM Thickness Range:1.5-2.0mm Coil Width:276mm Speed:13m/min Decoiler Capacity:1.5ton Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C
Model No.:GDF-T20/30,DGDF-T20/T30 Max Thickness:0.5-0.8mm(21-26ga) "a"Size:20±0.5,30±0.5 Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C
Model No.:Compa1300*3100,Compa1500*3100 Table Size:1300*3100mm,1500*3100mm Speed:0.5m/min Max Coil Thickness:6mm/12mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C
Model No.:CCI-S,CCI-1600 Style:Single-end,Both-end Duct Length:N/A,1200-1550mm Speed:24m/min(78FPM) Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C
Model No.:W750,W1300,W1600 Max Thickness:1.2mm Max Width:750mm,1250mm,1550mm Roller Diameter:63mm,63mm,72mm Min Diameter:88mm,88mm,100mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C
Main Features 1. 1KHZ, 4KHZ, 8KHZ Inverter Frequency, highly precise welding control System. 2. Friendly interface:Welding paremeter adjustment and Welding Process LCD display. 3.Constant Welding Current, Constant Welding Voltage, Constant Welding Power, Welding Pulse Width, four kinds of control mode. 4. Three-Stage Welding Method, there is the fuction of welding Current Slowly Go Up and Down. 5. Can set Min and Max value for monitoring parameters. 6. The welding source has excellent interface functions and is equipped with RS232 communication connector to accept various weld control inputs. 7. Complete model, wide range of applications and widely used. Main Technical Parameters Model No.KIA-1KAKIA-2KAKIA-3KAKIA-4KAKIA-6KAKIA-10KA Rated Power(KVA)4610121625 Max Output Current1000200030004000600010000 Rated Duty (%)202020101010 Inverter Frequency(KHz)8/48/48/48/4/111 Welding Pulse Quantity333333 Welding Schedule Memory20Group20Group20Group20Group20Group20Group Dimension-L*W*H(mm)435*185*320435*185*320435*185*320460*400*300460*222*345460*222*345 385*200*300385*200*300 Weight(Kg)913131314.517 2829.5333435.539
Features: 1.S-PH3000A-C can be operated horizontally and vertically, which allows to perform different types of weld (horizontal and vertical joints). The machine is equipped with a control panel, which allows easily and safely setting and performance of the whole welding process.Otherwise according to the user’s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld. Each welding cycle is automatically memorized 2. Welding types: horizontal, 90 degrees (on request), S-PH3000A--C is a CNC automatic butt fusion machine, suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF…. 3.The new steel structure, patented mechanical synchronous drive technology, through the proportional valve, in the weld area to achieve uniform pressure.Control system Siemens PLC, 7-inch color touch screen. 4.Data parameters are automatically selected according to the material a particular welding pressure, temperature and time. 5.3mm-40mm welding capabilities, special welding thickness of up to 60mm. Range of Application : Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, pipeline construction, ventilation systems, serial welding, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics.
Features: 1. S-PH3000A- J-C can be operated horizontally , circular and vertically, which allows to perform different types of weld (horizontal, circular and vertical joints). The machine is equipped with a control panel, which allows easily and safely setting and performance of the whole welding process.Otherwise according to the user’s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld. Each welding cycle is automatically memorized 2. Welding types: horizontal, 90 degrees (on request), circular (on request),S-PH3000A- J-C is a CNC automatic butt fusion machine, suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF…. 3. The new steel structure, patented mechanical synchronous drive technology, through the proportional valve, in the weld area to achieve uniform pressure. 4. Control system Siemens PLC, 7-inch color touch screen. 5. Data parameters are automatically selected according to the material a particular welding pressure, temperature and time. 6. 3mm-40mm welding capabilities, special welding thickness of up to 60mm. Range of Application : Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, pipeline construction, ventilation systems, serial welding, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics.
Features: 1. S-PH3000A- J can be operated horizontally and circular , which allows to perform different types of weld (horizontal and circular). The machine is equipped with a control panel, which allows easily and safely setting and performance of the whole welding process.Otherwise according to the user’s needs, it is also possible to input the type of material and the dimension of the thermoplastic sheet, and therefore proceed to weld. Each welding cycle is automatically memorized 2. Welding types: horizontal and circular (on request),S-PH3000A- J is a CNC automatic butt fusion machine, suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF…. 3. The new steel structure, patented mechanical synchronous drive technology, through the proportional valve, in the weld area to achieve uniform pressure. 4. Control system Siemens PLC, 7-inch color touch screen. 5. Data parameters are automatically selected according to the material a particular welding pressure, temperature and time. 6. 3mm-40mm welding capabilities, special welding thickness of up to 60mm. Range of Application: Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, pipeline construction, ventilation systems, serial welding, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics.
Features: The new steel structure, mechanical synchronous transmission technology, through regulator, in the weld area to achieve uniform pressure. All actions are cylinder drive, easy to operate, durable. Select specific welding pressure data according to the material, temperature. Sheet metal welding thickness 3mm-25mm. Range of Application: Manufacture of reservoirs, tanks and containers, manufacture of plastic apparatus, pipeline construction, ventilation systems, serial welding, water treatment systems, scrubbers, environmental technology, swimming pools, transport and logistics
Chain link fence panel characters Material: low carbon steel wire, ss wire, aluminum alloy wire Surface finish: electro+ gal., hot-dipped gal., pvc coated Edge style: twisted barb edge, closed edge Rod: 38mm, 48mm as standard Small qty will be packed on woven bag , bulk qty will add pallet for easy transport.
1. Manual feeding type: Manual place the precut wires into mesh mold, start the welding machine and welding a row in turn, then manual push mold to next row for automatic welding until finish a complete mesh; 2. Semiautomatic feeding type: Manual place the precut wires into mesh mold, automatic step feeding to welding position and welding a row automatically, then automatic draw the mesh mold to next welding position and automatic welding until to finish a complete mesh, then mesh mold automatic back to origin and get out the mesh ; 3. Automatic Double Mold Feeding Type: Adopted double layers type or tandem type automatic welding fixtures, and combined advanced PLC , human machine interface and precision servo motor driven system to obtain the continuous feeding and welding automatically. Machine included double mold for alternating welding, if one performed welding, then another can be placed wires at same time. So the machine can continues working to improve production efficiency; 4. Full automatic feeding type: Equipped automatic hopper for cross wire feeding, line wire automatic feeding as setting length through automatic mesh drawing system . Widely used for each kinds of fence , hardware mesh, goods shelf, cages, wire frame, steel plate stiffener and others multiple spot welding.
Cable assemblies. Wire harnesses / wiring harnesses. Electro-mechanical assemblies. Box build. Battery, battery packs and power supply assemblies. Alarm, surveillance and security assemblies. Control panels and panel wiring assemblies. Robotic, cables, controls, panels and assemblies. Hotrunner & mold connectivity solutions. Power cords.
Size: 1200*1000*890mm Loading Capacity: 1500kg
Size: 800*600*640mm Mesh gauge: 50*50mm Wire diameter: 5.8mm Loading capacity: 800kg Features: foldable, stackable
