Cutter suction dredger is widely used. It can be used for dredging, river and pool excavation, river dredging, channel excavation, reclamation by pumping filling, etc. in rivers, lakes and sea
China Classification Society (CCS) and foreign classification societies, completes the task of new ship building in a shorter time better, and provides the construction side with real-time technical operation guidance.
Lichangtai has its own inland river ship fleet that is engaged in the transportation business shipping building sand and stone to different mixing stations and construction sites in the Pearl River Delta (including Zhaoqing,
The sound proofing movable wall panels will be made from 9 mm mdf boards and shall be 65 mm thick and 1230 mm maximum width, made to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminum frames with interlocking corner construction . The sound proofing movable walls panel faces shall be finished with selected material.
Basic panels shall be equal in module.
Maximum height : 17000 mm.
Sound proofing movable walls panel surface finish: the sound proofing movable walls panel surface will be as per the clients requirement finished either in bunge factory china or by others. The basic panels will be raw mdf (the finish materials such as laminate, veneer, melamine or fabric etc.)
Retractable mechanism: the top and bottom rail of each panel shall incorporate an extruded aluminum box section mechanical seal manually operated by a handle inserted in the panel stile, turning the handle through 45 degrees shall simultaneously extend or retract the top and bottom seals through an steel and spring mechanism which shall firmly
Hold the seals in the retracted or extended mode. Single crank type mechanisms shall activate floor and head seals.
Sound proofing movable walls features:
Top hung system without the need for a floor track
Combines elegance with robust construction
Concealed or exposed panel edge profiles
Numerous panel stacking options for complete flexibility
The system offers various levels of sound reduction
Extensive range of surface finishes available
Retractable top and bottom seals ensure effortless movement of panels
Sealed for life roller assemblies provide smooth and silent movement
Application:
Bunge soundproof folding partitions wall can be used to convention centers, gymnasiums, religious facilities, hotels, auditoriums, corporate training facilities, civic or exposition halls, schools, banquet facilities, etc.
Our movable and operable partition system accessories are custom for each client and project,and they are also made of superior material.Track system for right-angled configurations with cross- roller carriers for element weights up to 500 kg. Support rollers in the junctions guarantee easy operation when sliding the elements across intersections.
Accessories specification:
Operation:Partitions shall be top supported, manually operated panels stacked in an area nominated in the plans. When closed, the operable wall shall provide a complete sound retardant barrier. No floor track shall be used.
Track: The tracks are made from extruded 6063 - T5 anodized aluminium. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track.
Aluminium trim: The panel trims will be standard series with exposed Aluminium trims of 10 mm thickness finished in 6063 - T5 Anodized Aluminium shall be used.
Panels:The Panels will be made from 12mm MDF boards and shall be 100mm thick and 1230mm maximum width, made to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminium frames with interlocking corner construction .The panel faces shall be finished with selected material.
Panel Surface Finish:The panel surface will be as per the clients requirement finished either in Sliwal factory â?? China or by others . The normal finish such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system.Retractable seal drop will be 23mm.
Advantages:
Environmental protection and light material.
Top hung system without the need for a floor track.
Retractable top and bottom seals ensure effortless movement of panels.
Concealed or exposed panel edge profiles.
Numerous panel stacking options for complete flexibility.
Extensive range of surface finishes available, easy construction and transportation.
The system offers various levels of sound reduction.
Combines elegance with robust construction.
Allow Customization.
Related Products
1676 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Features:
1> Floor to ceiling room divider is modernized decoration style.it can separate the space speedly and conveniently.and it has sound insulation and heat insulation and fireproof function;
2> the floor to ceiling room divider is made from high density s/s frame, special made rubber, excellent sound insulation cotton and finish board etc.the finish board is flat and hard;
3> the floor to ceiling room divider is inserted in the aluminum track, assembled with multi direction wheels;the board can be stored in may different ways;
4> it doesn't need track on the floor, we only hang the track on the ceilings and it can be at the same plane with the ceiling decoration.it won't affect the whole decoration style;
5> around the board, there is sound insulation rubber, it can help to insulate the sound entering;
Finishes:
there are wide of range face finishes are available :melamine faced MDF or
plywood, fabric, carpet, fabric, artificial, leather,wood veneer, high pressure laminate,acoustic panel,white board ect., panels can also be supplied unfinished for field decoration,standard frame color is clear anodized aluminum,custom powder coating colors are available.
BUNGE movable partition wall is made of high quality anodized aluminum frame with environmentally composite materials.the panels move on a ceiling track with no requirement of floor guides or rails.,the panel has a standard thickness of 65 mm ,85 mm and 100 mm,and a width up to 1230 mm.Maximum height can reach 17 meters tall.
Common Applications:
1.studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects.
2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location.
3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects.
4.air-port, railways, bus-stops, workshops and more noise reduction projects.
About us:
Guangzhou Bunge Building Decoration Engineering Co.,Ltd is a professional company in manufacturing Movable Partitions.It also artistically designs and carefully does research and development,.The company has adopted the advance partition technology of USA,Germany and Denmark.We have professional staff with more than 10 years of experience in design,production and installation.
TJ-952 PVC waterproof membrane takes PVC resin as main ingredient,adding adequate modifiers,antioxidant agents,UV-light absorbents,color agents,filler agents and so forth,through polymerization and extrusion calendering,deformation,cool,inspection,racking,and packaging processing procedures into bendable waterproofing sheet membrane.It possesses high tensile and good elongation,high and low temperature resistance and it has good hot-melting properties. Cold-adhesive and hot-welding is both available when attending to the overlap of membrane,which forms into a solid,enclosed and integrated waterproofed layer.
PVC membrane is also called polyester fabric inner reinforcement PVC membrane,which is an plastomeric material. It takes polyester fabric textile as reinforcement felt,via special extrusion craft,making the PVC plastic layer on both sides with polyester reinforcement felt amid into an integration.Cutting-edge PVC plastic layer in combination with mesh polyester fabric gets rise to superior dimension stability and extremely low thermal expansion coefficients.
Characteristics
Prolonged shelf life,anti-ageing,used for house application can last over 20 years,underground can last over 50 years
High tensile strength/elongation,small heat-treatment dimensional variation
Great puncture resistance,good anti impact
Easy to install and weld solid;Environmental-friendly
Strong anti chemical,having special use
Specification:
Nominal Thickness:1.2/1.5/2.0mm Width:2.0m Length:15/20m or customized
Application Guide
In combination with the features of PVC membrane,it s usually applied in three methods,such as full-adhesive installation,border adhibiting method and mechanical fastener method. It requires exclusive PVC accessories set to help installation for complicated waterproofing spots.
1:Full-adhesive installation: Using exclusive PVC membrane adhesive set to apply on the substrate under normal condition is called full-adhesive installation
1)Requirement
The substrate needs to be smooth,no crack or bugle spots,clean,dry and the humidity is less than 9%,make the chamfer at internal corner and external corner with the diameter is more than 20mm
Installation process
Substrate treatment Measure,locate and draw lines weak spots strengthening paint the glue on large scale pave the membrane overlap treatment check
TJ-701 EPDM Waterproof Membrane
EPDM takes the polymer of three monomers Ethylene,Ethylene Propylene,DCPD(dicyclopentadiene) or ENB(Ethylidene Norbornene) through polymerization,adding adequate IIR(Isobutylene Isoprene Rubber),tenderizer,fortifier,filling agent,promoter,vulcanizing agent formulate into a kind of waterproof
material,which enjoys high flexibility and bendable property.
Characteristics
â?¢Excellent anti-ageing,prolonged longevity;Shelf life can last 50 years
â?¢Good strength and tensity/Applicable temperature range(-40~80)
â?¢Great high-temperature,low-temperature resistance
â?¢Single layer applied is applicable and cold applied
Specification
Thickness:1.0/1.2/1.5/2.0mm Width:1.2m Length:20m or customized
Application
Extensively used in basement,tunnel,wall,underground,reservoir,municipal infrastructure,bridge,metro
dam and so forth
Installation
EPDM installation process
Clean Substrateadded waterproofed installation in complex spotspaint primerpaint exclusive gluepave membraneedge treatmentpave membraneedge treatmentprotection layer construction
Attention
1)Clean the substrate:First layer of slurry or concrete needs to be solid,dry,even,no bugle or crack,clean dust,oil of the substrate before paving the membrane
2)Spot strengthen:Extra intensity treatment at complex spots where drainage and deformation center on before paving the membrane on a large scale
3)Membrane pavement:EPDM waterproofing layer is single or multi-layers structure. As for single layer,the thickness should be more than 1.5mm,as for double layers,it should be more than 2.4mm.
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film
with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection.
Features:
Supreme adhesion integrates with the substrate forever with special patent formula
Suitable for various substrates enables to lower resource waste massively and save the cost and time
Unique operation craft of wet treatment,free from primer,no need of heat melt
Size Available
Width-3.28ftï¼?1m
Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m)
Thickness-
N(1.2mm,1.5mm,2mm)
G (2mm,3mm,4mm)
Packaging,storage and shipping
Product is packed into rolls with plastic woven bag
Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
SBS modified bitumen waterproof membrane takes SBS
(styrene-butadiene- styrene) thermoplastic elastomer modified
asphalt mixed with additives as base materials, using premium
polyester (PY), fiberglass (G), fiberglass & polyethylene felt
(PYG) as matrix , and adopting sand (S), mineral granule
(M), polyethylene film (PE), aluminum foil etc as dip-coat, which is
produced by stirring and grinding with special equipment.
Features
A)Good low temperature flexibility,it has no crack when
temperature drops into -20â??;Excellent heat resistance,
it has no flow when temperature reaches 90â??
B)Great tensity,prolonged life span,easy to use
C)Suitable forâ? and â?¡grade constructional waterproofing
project,especially for cold area and the project of frequent
structural deformation
Size Available
â?¢Width-3.28ftï¼?1mï¼?
â?¢Length-24.6ft(7.5m)
32.8ft(10m)49.2ft(15m)
â?¢Thickness-
PY (3mm,4mm,5mm)
G (3mm,4mm)
APP modified bitumen waterproofing membrane based on
APP (atactic polypropylene) or APAO, APO (It is reported
that tiring polymer) modified asphalt roofing, high-quality
polyester felt, fiberglass mat base for the child, with fine
sand and mineral tablets (piece) material, PE film for
the cladding material, the use of advanced technology refined
plastomer modified bitumen membrane.
Features
A)Good elongation;Good anti-weathering;Excellent flexibility
B)Strong adhesion;High strength;Anti-abrasion and anti-impact
C)Superior High and low temperature resistance,especially for hot areas
D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew
ADVANTAGES
â?¢Over 1000 cases in waterproofing projects
â?¢Accredited contract observing enterprise
â?¢15 years of experience in waterproofing industry
â?¢Self-contained production line,sound and completed production management systems
â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels
â?¢3 years of innovation in production craftmanship and 10 proprietary products
Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs
of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including
waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Our cone crusher with high efficiency has get to world advanced level. This series of crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. It is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, gritstone, etc. The type of the crushing cavity is decided by the application of theores. Standard type is PYB (secondary crusher); middle type is for PYZ ( tertiary crusher ); short-head type is special suit for small particles.
International standard container,the spare parts is packed in wooden cases
Skymear Crowd Barriers supplies and extensive range of high quality,safe berrier systems and relatedproducts,which are fast,easy-to-use in set-up,and efficient to transport whilst reaining robust and modular
Overview:
Skymear Crowd Barriers supplies and extensive range of high quality,safe berrier systems ad relatedproducts,which are fast,easy-to-use in set-up,and efficient to transport whilst reaining robust and modular.
Steel Barricade, Tensa Barrier, Aluminum Crowd Barrier Corner & Gate ï¼?Aluminum Trussesï¼?Mobile Truss ClampsManufacturer. More information please view here.
Rubber Two-channel cable protector with black rubber base and yellow plastic two-piece flaps, interlock design between each two protectors. Used especially for two-channel small cables.
Overview
Our Queen Bee Two-Channel Rubber Cable Protectors can effectively protect valuable cables and wires from damage caused by heavy-duty vehicle traffic. These cable ramps have been enlarged and strenthened on the rubber base and hinged rubber lid with diamond tread surfaces for enhanced foot and wheel traction. The lid with bright yellow color can increase the visibility for pedestrians and vehicles in high traffic areas. Multiple ramps can be linked together with the modular interlocking design connectors very easily and firmly. These Two-Channel Cable Protectors can extend to any necessary length with the connectors.
* Protect cables and hoses up to 1"(25mm) in diameter
* Support up to 22,000 lbs (10,000 kg) per axle
* Features two cable channels
* All-weather yellow and black rubber construction weighs 20 lbs (9.2kg)
* Male and female connectors
All our cable protectors are made in China. We can do OEM for your customized service and provide our factory price directly to you.
Product Features
1. Provide safe and easy crossing for pedestrian and vehicle in high traffic areas
2. Support high loading capacity 22,000 lbs (10,000 kg) per axle for heavy equipment
3. Maximum traction with diamond tread on the non-slip surface
4. Warning symbols molded into lid surface with universal safety bright yellow for high visibility
5. T-connectors interlock modular ramps together firmly
Mobile Truss Clamps, Aluminum Trusses, Riser Folding Stage, Rubber Cable Protector Supplier.
1676 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
