Wood Chips Gasifier,
Hastelloy C-276 is a nickel-molybdenum-chromium superalloy with exceptional corrosion resistance in a variety of aggressive media. It was developed by Haynes International in the 1960s as a more versatile alternative to other nickel alloys such as Hastelloy B-2 and Hastelloy C-4. The high chromium content in Hastelloy C-276 provides superior resistance to oxidizing environments, while the molybdenum and tungsten enhance resistance to reducing media. The nickel content also makes Hastelloy C-276 highly resistant to chloride-induced stress corrosion cracking. Hastelloy C-276 has a wide range of applications in industries such as chemical processing, pulp and paper production, waste treatment, and pollution control. Its resistance to hot sulfuric acid and chlorine environments makes it suitable for use in scrubbers, ducting, and piping systems. It is also used in flue gas desulfurization systems and in the production of organic chemicals such as acetic acid and acetic anhydride. Hastelloy C-276 is a versatile alloy that can be easily fabricated using traditional techniques such as hot and cold forming, welding, and machining. It can also be heat treated to optimize its properties for specific applications. For example, annealing at temperatures between 2050�°F and 2150�°F can improve resistance to intergranular attack, while solution annealing at 2150�°F followed by rapid quenching can enhance resistance to localized corrosion. Overall, Hastelloy C-276 is an excellent choice for applications that require superior corrosion resistance and high strength in aggressive environments. Its versatility, ease of fabrication, and excellent mechanical properties make it a popular choice in a variety of industries. The following are the various national standards for Hastelloy C-276 alloy: United States: AMS 5750, AMS 5751, AMS 5796, AMS 5587, ASTM B366, ASTM B462, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N10276 Europe: EN 2.4819 Germany: DIN 17744 France: AFNOR NC 17 D United Kingdom: BS HR 202, BS HR 403 Japan: JIS NW 0276 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-276 plate; Hastelloy C-276 sheets; Hastelloy C-276 tube; Hastelloy C-276 pipe;Hastelloy C-276 flat; Hastelloy C-276 bar GB:GH2761/JIS:NW 0276/UNS :N10276/W.Nr:2.4819 Hastelloy C-276 has a wide range of applications in industries such as: Chemical processing Pulp and paper production Waste treatment Pollution control Scrubbers, ducting, and piping systems in sulfuric acid and chlorine environments Flue gas desulfurization systems Production of organic chemicals such as acetic acid and acetic anhydride. It is also used in various other applications where corrosion resistance and high strength are critical.
Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum. Hastelloy C-2000 has excellent resistance to localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking, as well as to intergranular attack and corrosion from wet chlorine gas. It also has good resistance to oxidizing and reducing environments, making it suitable for use in a wide range of industrial applications, including chemical processing, pollution control, and pulp and paper production. In terms of mechanical properties, Hastelloy C-2000 has a minimum tensile strength of 620 MPa and a minimum yield strength of 270 MPa, along with a minimum elongation of 45%. It has a hardness range of HB 215-335. Overall, Hastelloy C-2000 is a highly versatile alloy that offers excellent resistance to a wide range of corrosive media, combined with good mechanical properties and ease of fabrication. It is a popular choice for applications where corrosion resistance is critical, such as chemical processing, pollution control, and pulp and paper production. Here are the national standards for Hastelloy C-2000 alloy: United States: AMS 4675, AMS 7233, ASTM B366, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N06200 Europe: EN 2.4675 Germany: DIN 17744 France: AFNOR NU-30M United Kingdom: BS HR 505 Japan: JIS NW 6200 We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-2000 plate; Hastelloy C-2000 sheets; Hastelloy C-2000 tube; Hastelloy C-2000 pipe;Hastelloy C-2000 flat; Hastelloy C-2000 bar GB:GH3600/JIS:NW 6200/UNS:N06200/W.Nr:2.4675 Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures. Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
INCONEL 22 is extremely resistant to water and general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, tough and versatile even at high temperatures. A nickel base with 22% chromium, Inconel 22 is completely austenitic. This means it is non-magnetic and will not harden with heat treatment. Nickel also helps protect the alloy from corrosion by halides such as chloride and fluoride when subjected to extreme heat. In addition to nickel and chromium, Inconel 22 contains 14% molybdenum and 3% tungsten. These two metals make the alloy resistant to wet reducing media such as iron, copper salts and nitric acid. Combined with chromium's resistance to wet oxidizing media such as iron salts, copper salts and nitric acid, this makes Inconel 22 particularly suitable for use in highly corrosive environments where safety is paramount. American standard designation: UNS N06022, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B335, ASTM B622, ASTM B626, ASTM B366, ASTM B574, ASTM B622, ASTM B619, ASTM B775, ASTM B462, ASTM B564, ASTM B472, ASTM B775, ASTM B829. German standard designation: W.Nr. 2.4602, Specifications: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754. Japanese standard designation: JIS NW6022, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH3030, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012. We can provide the following the form:Inconel22 alloy coil; Inconel22 alloy strip;Inconel22 alloy plate; Inconel22 alloy sheets; Inconel22 alloy tube; Inconel22 alloy pipe; Inconel22 alloy flat; Inconel22 alloy bar GB:GH3030;JIS:NW6022;UNS:N06022;W.Nr:2.4602 Pollution control (flue gas desulfurization), waste treatment, power generation, pulp and paper processing, marine applications, and chemical and petrochemical processing.
317L stainless steel is an austenitic stainless steel that contains a low carbon content and higher amounts of molybdenum and nickel compared to 304 stainless steel. The low carbon content of 317L reduces the risk of intergranular corrosion caused by sensitization during welding or high-temperature exposure. The higher nickel and molybdenum content of 317L provide superior resistance to corrosion in harsh environments, particularly those containing chlorides or other halides. This makes it suitable for use in chemical processing, pulp and paper manufacturing, and oil and gas refining applications. 317L stainless steel offers excellent toughness, strength, and formability, and is easy to fabricate using standard methods. It can be welded using common welding techniques, and is often used to fabricate complex shapes and components. Some of the key properties of 317L stainless steel include: Corrosion resistance: 317L offers superior corrosion resistance in harsh environments, particularly those containing chlorides or other halides. High-temperature resistance: 317L can withstand high temperatures and thermal cycling without losing its corrosion resistance properties. Strength and toughness: 317L offers good strength and toughness, making it suitable for use in demanding applications. Fabricability: 317L is easy to fabricate using standard methods, and can be welded using common welding techniques. Overall, 317L stainless steel is a versatile and reliable material that is well-suited for use in a wide range of applications where superior corrosion resistance and high-temperature performance are required. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Here are some of the most common international standards for 317L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A403/A403M: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:317L stainless steel coil; 317L stainless stee strip;317L stainless stee plate; 317L stainless steel sheets; 317L stainless steel tubes; 317L stainless steel pipe; 317L stainless steel flat; 317L stainless steel bar
Inconel 686 is suitable for use in amphoteric acids or amphoteric mixed acids, especially in corrosive environments containing high concentrations of chloride ions in amphoteric mixed acids. It has excellent resistance to uniform corrosion, electrochemical corrosion, localized corrosion and hydrogen embrittlement in seawater, and seawater has little effect on its fatigue strength. Therefore, Inconel686 alloy is an ideal material for marine environment applications, such as fasteners in seawater. The yield strength after cold working strengthening can be as high as 150ksi (1000MPa), and it has the same corrosion resistance as the solid solution state. Inconel 686 alloy is used in corrosive environments such as chemical process, pollution control (flue gas desulfurization), papermaking, pharmaceutical and garbage disposal. Inconel686 welding material is an ideal corrosion-resistant material for surfacing of steel. Here are the international standard designations and specifications for Inconel 686: American standard designation: UNS N06686, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B446, ASTM B462, ASTM B564, ASTM B166, ASTM B462, ASTM B472, ASTM B626, ASTM B408, ASTM B473, ASTM B444, ASTM B729, ASTM B677, ASTM B622, ASTM B829, ASTM B366. German standard designation: W.Nr. 2.4606, Specifications: DIN 17744, DIN 17750, DIN 17752, DIN 17754. Japanese standard designation: JIS NW686, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH686, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012. We can provide the following the form:Inconel686 alloy coil; Inconel686 alloy strip;Inconel686 alloy plate; Inconel686 alloy sheets; Inconel686 alloy tube; Inconel686 alloy pipe; Inconel686 alloy flat; Inconel686 alloy bar DIN:17744;JIS:NW686;UNS:N06686;W.Nr:2.4606 Mainly include chemical treatment, pollution prevention and control, pulp and paper, industrial waste and domestic waste treatment. Chemical processing includes heat exchangers, reactors, evaporators and transfer piping. Air pollution prevention includes chimney linings, pipes, furnace doors, scrubbers, flue gas reheaters, propellers, housings
Hastelloy S is a nickel-chromium-molybdenum-tungsten alloy with excellent corrosion resistance in a wide range of aggressive media. It was developed by Haynes International, Inc. and is specifically designed for use in highly oxidizing environments. Hastelloy S offers superior resistance to oxidizing and reducing environments, including hot sulfuric acid, sulfurous acid compounds, and hydrogen chloride gas. It also exhibits excellent resistance to localized corrosion, such as pitting and crevice corrosion, and has good resistance to stress corrosion cracking. Due to its exceptional corrosion resistance, Hastelloy S is widely used in the chemical processing industry, especially for applications involving highly corrosive acids, such as sulfuric acid and phosphoric acid. It is also used in pollution control equipment and in the production of pulp and paper. Hastelloy S can be fabricated using a variety of methods, including welding, forging, and machining. However, it is important to use appropriate techniques and equipment to avoid damaging the material's corrosion resistance properties. Overall, Hastelloy S is a highly reliable and durable alloy that offers exceptional performance in highly corrosive environments. American Standards: ASTM B619: Standard specification for welded hastelloy S tubes ASTM B622: Standard specification for seamless hastelloy S tubes ASTM B626: Standard specification for hastelloy S welded and seamless pipe fittings ASTM B366: Standard specification for hastelloy S welded and seamless fittings ASTM B574: Standard specification for hastelloy S rods and bars ASTM B575: Standard specification for hastelloy S plates, sheets, and strips European Standards: EN 10095: Standard specification for hot rolled, forged, and cold worked hastelloy S plates, sheets, strips, rods, and wires EN 10216-5: Standard specification for seamless steel tubes for pressure purposes - technical delivery conditions - part 5: stainless steel tubes Japanese Standards: JIS NW 0276: Standard specification for hastelloy S plates, sheets, strips, rods, and seamless pipes JIS NW 625: Standard specification for hastelloy S welded pipes Chinese Standards: GB/T 14994: Standard specification for nickel-based hastelloy S welded seamless steel tubes GB/T 15007: Standard specification for nickel-based hastelloy S plates, sheets, and strips GB/T 15013: Standard specification for nickel-based hastelloy S welded and seamless pipe fittings GB/T 14995: Standard specification for nickel-based hastelloy S welded steel pipes GB/T 15014: Standard specification for nickel-based hastelloy S rods and bars. We can provide the following the products:Hastelloy S coil; Hastelloy S strip;Hastelloy S plate; Hastelloy S sheets; Hastelloy S tube; Hastelloy S pipe;Hastelloy S flat; Hastelloy S bar GB/JIS:NW0276/UNS:N06635/W.Nr:2.4687
Hastelloy G-30 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids. It has good resistance to localized corrosion and to both reducing and oxidizing aqueous media. In addition to its excellent corrosion resistance, Hastelloy G-30 also exhibits good mechanical properties, such as high strength and ductility. It can be easily formed, welded, and machined using standard processes, making it suitable for a wide range of applications in various industries, including chemical processing, petrochemical, pollution control, pulp and paper, and more. Some of the key features and benefits of Hastelloy G-30 include: Excellent corrosion resistance in highly oxidizing acids and other aggressive environments Good resistance to localized corrosion caused by chlorides and other halide ions High strength and ductility Good formability, weldability, and machinability Suitable for a wide range of applications in various industries Overall, Hastelloy G-30 is an excellent choice for applications that require superior corrosion resistance and high mechanical properties in highly aggressive environments. Its unique combination of chemical composition and mechanical properties make it a versatile and reliable alloy for a wide range of industrial applications. American Standards: AMS 5878: Standard Specification for Hastelloy G-30 Plate, Sheet, and Strip; AMS 5838: Standard Specification for Hastelloy G-30 Bars and Shapes; ASME SB 582: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Plate, Sheet, and Strip; ASME SB 575: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip; ASME SB 581: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Seamless Pipe and Tube; ASME SB 462: Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service. We can provide the following the products:Hastelloy G-30 coil; Hastelloy G-30 strip;Hastelloy G-30 plate; Hastelloy G-30 sheets; Hastelloy G-30 tube; Hastelloy G-30 pipe;Hastelloy G-30 flat; Hastelloy G-30 bar BS:HR 202/JIS:NW6030/UNS:N06030/W.Nr:2.4603
MHS1560*600 Technicial Specifications: Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
MHS1560*600 Technicial Specifications Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T: Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
Max. drilling diameter : 35mm Max. drilling depth : H max=60mm Max. processing pitch: 1300x672mm Min.processing pitch: 130x32mm Total number of drilling shafts: 63 pcs Total number of drilling rows: 21x3 rows Installing dia to the drill: 10mm Distance between spindle: 1300mm Working pressure: 0.5~0.6Mpa Total power of motor: 4.5kw Spindle speed: 2840rpm Exterior of machine: 2200x2500x1600mm Weight of machine: 1400 kgs. Packing: wooden case.
It Supports all types of banding materials,such as pvc tape, melamine tape, wooden veneer, etc. It can band various outlines: straight, curved, circles,arcs, bevel. It accepts banding tapes at a wide range of length,width and thickness. It is flexible and easy to carry and thus suitable for both workshop usage and customers' DIY operation. It's very light during operation due to the design of guiding plate It's suitable for low temperature hot-melt adhesives(melting point below 200ípC). All electronic components comply with UL and CSA certifications Specification: Machine size: 400 x 280 x 380 mm Total power usage: 525W , with 25W motor Hot melt adhesive pot volume:330ml Warming up time: about 10 min Feeding speed: 4 meters /minute Tape thickness: 0.3-3mm Tape width: 10--45mm Machine size: 400 x 280 x 380 mm
It Supports all types of banding materials, such as pvc tape, melamine tape, wooden veneer, etc. It can band various outlines: straight, curved, circles,arcs, bevel ... It accepts banding tapes at a wide range of length, width and thickness. It is flexible and easy to carry and thus suitable for both workshop usage and customers' DIY operation. It's very light during operation due to the design of guiding plate It's suitable for low temperature hot-melt adhesives(melting point below 200 0C). All electronic components comply with UL and CSA certifications Specification: Machine size: 330 x 300 x 350 mm Packing option 1: 395 x 365 x 335 mm Packing option 2: 460 x 430 x 510 mm Total power usage: 765W , with 15W meter Hot melt adhesive pot volume:160ml Warming up time: about 5-10 min Feeding speed: 4 meters /minute Tape thickness: 0.3-3mm Tape width: 10--45mm
Cutting saw Features and advantages of the machine 1.Adopting germany-made linear guide rail whichensures high precision , working stability and long life durability. 2.By using siemens plc , the man-machine interface make the control operation much easier and convenient. 3.Adopting italian frequency conversion velocity modulation electrical machinery , with the highest speed as 6, 000r/min, makes the pieces much smoother and more precise. 4.Saw positioning by using step-by-steps the electrical machinery , precision ball bearing lead screw exported from germany makes the cutting word pieces more precise. 5.Adopting infrared to solve word pieces positioning problem of every shape. 6.Work pieces are positioned and clamped by the electric eye and the oil cylinder so as to obtain the best result. 7.The horizontal and vertical saws double the efficiency of cutting . All of the saws are adjustable so as to cut different kinds of boards . 8.Advanced dust collection system meets the modern environmental requirements. 9.This machine is especially suitable for the furniture, doors and floors manufacturing .It is an ideal machine for the furniture and other wood production manufacturers. Machine modelfu-48aplc controlfu-48bplc control Maximum sawing size2440-1220mm2440-1220mm Minimum sawing size1300-650mm950-750mm Maximum cutting thickness50mm60mm Traction power0.55/0.85kw0.65/0.85kw Sawing power3-4kw16kw Total power13.65/14.55kw19.4kw Saw speed2880r/min4200r/min Saw size1214 Weight3000kg3000kg Overall dimension5000-2750-2200mm5000-3820-2200mm
Panel saw 1.The machine applies to the cutting operations of diverse panels .By simple modifying, It is also suitable for cutting other materials, such as organic glass , etc.(use the specialties saw) 2.The main unit of the machine adopts mother-son saw structure, which avoids the fracture of panels. 3.With pressure beam to clamp the stacked panel sheets. 4.With key-type dust proof block , which reduces air pollution Machine modelmj6225amj6232a Maximum cutting length2500mm3200mm Main saw diameter355mm355mm Scoring saw diameter160mm160mm Main saw spindle speed5000r/min5000r/min Scoring saw spindle speed6400r/min6400r/min Maximum sawing thickness60mm60mm Feed speed15m/min, 20m/min, 25m/min15m/min, 20m/min, 25m/min Untread speed30m/min, 40m/min, 50m/min30m/min, 40m/min, 50m/min Total power7.5+1.3/1.8kw7.5+1.3/1.8kw Weight2800kg3000kg Overall dimension5200-3360-1700mm5200-3360-1700mm Price (fob foshan port)usd84208950 Machine modelmj6225bmj6232b Remarkplc controlplc control Price (fob foshan port)usd1207012760
Max.Sawing size:24001200mm Min.Sawing size:1200550mm Max.Cutting thickness:60mm(material density will cause thickness change) Traction power:0.65/0.85kw3 Sawing power:4(4kw+0.5kw) Saw speed:5600r/min Saw size:14â?� Min.Saw size:4'' Feeding power:0.55kw Weight:4000kg Overall dimension:490037502250mm
Non woven fabric, like PP, SMS, spunlaced, PET, wood pulp, wetlaid, elastic, needle punched .Export with shipment.
Rubber Wood FJ Board.
Raw Material:Pure Gypsum Powder,Quality Wood-pulp Paper,Fiber Glass,etc. Categories:Regular/Fire Resistant/Moisture Resistant/Water Resistant Edge:Taper/Square Thickness:8-15.9mm Width:1200/1220mm Length:2400/2440/3600/3660mm Executive Standard:GB/T 9775-2008
Double-end cutting saw, panel saw, sliding table saw, band saw, circular saw, high speed saw, arm saw, high speed band saw, rip saw, six units boring machine, five units boring machine, four units boring machine, three units boring machine, double units boring machine, one unit boring machine.