(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.
(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.
(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.
(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.
(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.
(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.
(7) Grade 309:Better temperature resistance than grade 304.
(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.
(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.
(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.
(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.
(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.
(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.
Product description
Toroidal transformer is made of high-quality silicon steel core and rolling grain-oriented or non-oriented silicon steel strip.
Product feature
Advantage:
1) high power storage
2) power: 50va to 3, 000va
3) universal purpose
4) low profile and low weight
5) low no-load losses
6) low mechanical hum
7) low magnetic leakage
8) high efficiency
9) reliable safety approvals
10) low operating temperature
11) cost saving prices
12) easy to mount
13) used widely in various electronic equipments and civil industry products
14) we can produce according to your specification
Application
Power of medical equipment, cnc machines, acoustics, communication equipments, power of computer, ups, power of led, etc.
Product description
Toroidal transformer is made of high-quality silicon steel core and rolling grain-oriented or non-oriented silicon steel strip.
Product feature
Advantage:
1) high power storage
2) power: 50va to 3, 000va
3) universal purpose
4) low profile and low weight
5) low no-load losses
6) low mechanical hum
7) low magnetic leakage
8) high efficiency
9) reliable safety approvals
10) low operating temperature
11) cost saving prices
12) easy to mount
13) used widely in various electronic equipments and civil industry products
14) we can produce according to your specification
Application
Power of medical equipment, cnc machines, acoustics, communication equipments, power of computer, ups, power of led, etc.
20 YEARS ACTIVITIES ANNIVERSARY
started his recycling activities in
This year is our 20 years presence in and we are thankful to all our staff , our business partners, our recycling partners, our families who are always supportive
We will continue our best for the future to be always the most competitive in the recycling field for
analog electric meter scrap
digital electric meter scrap
transformer cores aluminium winding scrap
transformer cores copper winding scrap
transformer cores small scrap
silicon sheet scrap
shredded motor scrap
shredded wire scrap
automobile ac compressor scrap
alternator scrap
starter scrap
automotive fuse and connectors scrap
ccl circuit boards copper laminates
ccl circuit boards trimmings
circuit board scrap mixed
circuit board shredded scraps
copper graphite foils scrap from battery industry
large motor scrap
mixed motor scrap
small motor scrap
aircon motor scrap
fan motor scrap
train motor scrap
washing machine motor scrap
compressor scrap
water pumps scrap
compressor armature scrap
copper iron armature scrap
rotor scrap
stator scrap
disk driver scrap
hard disk scrap shredded
hard disk scrap with board
hard disk scrap without board
laptop / notebook scrap
pos payment machine scrap
printer/copier scrap
electronic scrap breakage
power supply scrap with or without wires
charger adapter scrap with or without wires
connectors/plug ends scrap
network combiner scrap
silver plated telecom relay scrap
telecom modem scrap
telecom relay scrap
telecom server scrap
telephone fix set scrap
tv decoder box scrap
aircon units scrap
electric power tools scrap
electrical breakage scrap
electrical switch breaker scrap
industrial robot scrap
respirator scrap
discarded mill rolls steel scrap
gas meter scrap
mixed non ferrous breakage scrap
Any of above available for sale please offer us
60 Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers
Short on time? Let Turbines Generator Transformers Tg Auxiliaries Non Destructi sellers contact you.
Portable power station, portable fridge, folding solar charger, pizza oven & bbq, solar panel, solar garden light, solar street light, solar fan, wind turbine & controller, charging pile, emergency lighting, crown wheel pinion, aluminum radiator, head light.Import & export
ABS tube, PMMA tube, PC tube, PVC tube, PS tube, PE tube, PP tube, PA tube, PE t tube, PE TG tube, PU tube, TPU tube, TPE tube, EVA tube, non-standard tube.
Material: sintered ndfeb magnet
Grade: N48
Dimensions: 2" L x1" W x 1/2" T
Tolerances:
Plating/Coating: Ni-Cu-Ni (Nickel)
Magnetization Direction: Axial (through 1/2")
Max Operating Temp: 176oF (80oC)
Application: Wind Turbine
Since the first oil crisis in 1973 and the radiation leak at Fukushima in 2011, more and more eyes on wind power. For example, affected by the nuclear leakage accident in Japan, Germany will plan to abandon nuclear power to generate electricity completely. And the same time, strive to develop new & Renewable Energy, such as wind power and solar energy. Refer to wind power, magnet which plays important role in wind turbine generator to generate power cannot be ignored.
At present, the magnet which used on wind turbine alternator is Sintered NdFeB magnet (Commonly known as magnet king, permanent magnet, rare earth magnet);
The common grades are N42, N48, N50, and N38SH and so on;
The common shapes are segment, block, wedge, and trapezoid;
The coating is Ni-Cu-Ni triple plated
The biggest block magnet for wind turbine generator is about 240x80x40 mm (the thickness cannot over 50mm)
The normal block size is 2 (2 inches x 1 inch x 1 inch)
China also develops wind energy rapidly these years. In 2011, there is half Wind Power Equipments for the whole world made in China. In this field, China is ahead of Germany and USA, and dominates the industry. This mainly depends on domestic magnet manufacture. Recently, considering high cost in purchasing wind turbine from China, many customers plan to purchase accessories and material and make wind turbine by themselves. Of course, this includes magnet purchase from China.
China magnet source care customers benefit and will provide Wind Turbine Permanent Magnet with good quality, reasonable price; to satisfy customers requirement in making family-type or industrial wind turbine.
1. To delivery by air or by express: Anti-magnetic package (six sides iron sheets in the carton);
2. To Ship by sea: normal hard Paper Carton and Pallet;
3. To as per clients' special requirements.
I. Properties:
(1) Appearance: milk white paste.
(2) Composition: high molecular polymer latex and filling compound
(3) Ion type: Negative ion type or Non-ionic type
II. Characteristics
(1) Good screen-passing property, strong covering power, soft hand feeling.
(2) Good elasticity, good fastness, well washable
(3) Smooth and lustrous surface, not sticky to hands
III. Application scope:
It is suitable for deep or light colored elastic cotton fabrics or cotton blended fabrics.
environment friendly elastic white paste.
Elastic Paste
1. Color: Milk White / Milk White
2. Element: Multi-polymer & titanium powders & auxiliary / Multi-polymer & auxiliary
3. PH: 7.5-8.5 /7.0-8.0
4. Irons: Negative ions / Negative ions
5. Elasticity: 12-140000pcs / 10-120000pcs
6. Stability: Good / Good
7. Application: Printings for clothes, toys and textile; all kinds of cottons, TC clothes, blending, weaving clothes etc
8. Characteristics: Good covering power, high whiteness & elasticity, water-washing fastness, non stick, good hand-feeling and high elasticity.
Used the up to the minute cpu for eupec, the efficiency of the systems will be high, with LCD display:input power, output power;input voltage, output voltage, input current , output current; frequency, temperature and so on.
Base on all numeral controller technology , have many kinds of intelligentize controller function.
The system used advanced form technology, reduce city power currents aberrance.
Have perfect protect function, the highest dependability of the system.
Have mppt function, how many power from wind or solar , the unit will get the power to the grid .
Low voltage design, can working for wind and solar hybird system.
For transformer technique, make100% copper transformers materials
Electromagnetic compatibility: en50081, part1 en50082, part1
Grid disturbance: en61000-3-2
Grid text : din vde 126
Protection degree:ip 20 or ip65(outdoor)
Self comsumption at night:0w
Start way: as long as wind turbines or solar panels from the issue of an electric, it can automatically get the power to the grid, do not need to manually boot. Also directly with a load, working like off grid inverter.
1This machine is suitable for lasting the shoes with general and soft midsoles and with the heels at the height less than 180mm
2This machine is equipped with lasting height micro switch which makes the machine easily adjusted and finds position accurately
3We have full sizes of wiper and forming bands Which fit and shapes of shoes The forming bands rare wrapped by chine and can accordingly produce a good forming effect
4This machine adopts gears gear racks and ratchets to quickly and precisely adjusts the auxiliary supporter
5The second time and pressing of thw last supporter works with the wiper-heating device to increase the lasting effect It smoothes the lasting areas and upgrade the quality of the shoes
6Special design of rising oilway of shoe holder controls completely the shoe tree in the set position in the course of upper-binding
Haynes 242 is a nickel-chromium-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and resistance to hot corrosion and thermal fatigue. It is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners, as well as in industrial furnace applications.
Haynes 242 offers excellent high-temperature strength, with a minimum yield strength of 880 MPa and a minimum tensile strength of 1100 MPa. It also has good ductility, with a minimum elongation of 12%. In addition, it has good thermal stability and resistance to thermal fatigue, making it suitable for use in high-temperature applications.
Haynes 242 also has good resistance to oxidation and hot corrosion, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 300 and excellent fatigue strength at high temperatures.
Haynes 242 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques.
Overall, Haynes 242 is a high-strength, high-temperature alloy with excellent resistance to oxidation and hot corrosion, making it ideal for use in gas turbine engine components and industrial furnace applications.
Here are the national standards for Haynes 242 alloy:
United States: AMS 5708, AMS 5776, AMS 5777, AMS 5853, AMS 5854, AMS 5857, AMS 5858, AMS 5895, AMS 5896, AMS 5897, AMS 5898, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B435, ASTM B572, UNS R30556
Europe: EN 2.4683
Germany: DIN 17743, VdTÃ??V 435
United Kingdom: BS HR 202, BS HR 501, BS HR 502
Japan: JIS NW 6242
We can provide the following the form:Haynes 242 coil; Haynes242 strip;Haynes 242 plate; Haynes 242 sheets; Haynes 242 tube; Haynes 242 pipe;Haynes 242 flat; Haynes 242 bar
GB/JIS:NW 625/UNS:N10242/W.Nr:2.4683
Haynes 242 is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners. It is also used in industrial furnace applications, including muffles, retorts, and heat treating fixtures.
The high-temperature strength and excellent resistance to oxidation and hot corrosion make Haynes 242 an ideal material for use in high-temperature and corrosive environments. It is commonly used in aerospace, power generation, and industrial applications where high-temperature and corrosive conditions are present.
904L (N08904, 1.4539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon high nickel, molybdenum austenitic stainless acid resistant steel. It has very good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride ion-containing media. Excellent pitting corrosion resistance, good crevice corrosion resistance and stress corrosion resistance. It is suitable for sulfuric acid of various concentrations below 70�¯�¿�½?�?�°C, and has good corrosion resistance against acetic acid of any concentration and temperature under normal pressure, and the mixed acid of formic acid and acetic acid.
Here are some of the most common international standards for 904L stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM B625/B625M: Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
EN 1.4539: European standard for austenitic stainless steel with high molybdenum content
EN 10028-7: Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10217-7: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
JIS G4305: Cold-rolled stainless steel plate, sheet and strip
JIS G4312: Heat-resisting steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip
GB/T 4237: Hot rolled stainless steel plate, sheet and strip
GB/T 24511: Stainless steel and heat-resisting steel plate, sheet and strip for pressure equipments
We can provide the following form:904L stainless steel coil; 904L stainless stee strip;904L stainless stee plate; 904L stainless steel sheets; 904L stainless steel tubes; 904L stainless steel pipe;904L stainless steel flat; 904L stainless steel bar
430 stainless steel is a type of ferritic stainless steel that is commonly used in a variety of industrial applications. It contains chromium, which provides corrosion resistance, as well as other elements such as nickel and molybdenum.
Some key properties of 430 stainless steel include:
Corrosion resistance: 430 stainless steel offers good corrosion resistance in mildly corrosive environments, such as those found in food processing and indoor applications. However, it is not recommended for use in highly corrosive environments.
Heat resistance: 430 stainless steel can withstand high temperatures up to 815�°C (1500�°F) without losing its strength or corrosion resistance properties.
Formability: 430 stainless steel is easily formable, making it a popular choice for applications that require forming or bending.
Magnetic properties: 430 stainless steel is magnetic, which makes it a popular choice for applications that require magnetic properties, such as solenoid valves and transformers.
Some common applications for 430 stainless steel include:
Automotive trim and molding
Kitchen appliances such as refrigerators, dishwashers, and ranges
Indoor and outdoor architectural trim
Heat exchangers
Solenoid valves and transformers
Overall, 430 stainless steel is a versatile material that offers good corrosion resistance, heat resistance, and formability, making it a popular choice for a variety of industrial applications.
Here are some of the most common international standards for 430 stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip
We can provide the following form:430 stainless steel coil; 430 stainless stee strip;430 stainless stee plate; 430 stainless steel sheets; 430 stainless steel tubes; 430 stainless steel pipe;
430 stainless steel flat; 430 stainless steel bar
Incoloy alloy 945 is a high-strength, corrosion-resistant nickel-iron-chromium alloy. It is primarily composed of nickel, chromium, and iron, with trace amounts of molybdenum, copper, and titanium. This alloy exhibits excellent resistance to stress-corrosion cracking, crevice corrosion, pitting, and intergranular corrosion. It is also highly resistant to hydrogen embrittlement and chloride stress corrosion cracking.
Incoloy alloy 945 has good mechanical properties at both ambient and elevated temperatures. Its high strength and ductility make it ideal for use in high-stress applications, such as gas turbines, chemical processing equipment, and marine applications. This alloy can withstand temperatures up to 1000�°C (1832�°F) and has a high fatigue strength, making it suitable for use in cyclically loaded components.
In addition to its excellent mechanical and corrosion resistance properties, Incoloy alloy 945 is also resistant to oxidation and sulfidation. This makes it well-suited for use in high-temperature environments where exposure to gases and corrosive elements is common.
Overall, Incoloy alloy 945 is a versatile and reliable alloy that is suitable for a wide range of demanding applications in industries such as aerospace, chemical processing, and power generation.
The execution standards for Incoloy alloy 945 by country are as follows:
United States: ASTM B163, ASTM B423, ASTM B829, UNS N09945
Europe: EN 10216-5, EN 10297-2, EN 10222-5, EN 10250-4, EN 10269, EN 10272, EN 10296-2, EN 10297-4, EN 10302, EN 10312
Germany: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17754, W.Nr. 2.4633
United Kingdom: BS 3076
We can provide the following the form:Incoloy alloy945 coil; Incoloy alloy945 strip;Incoloy alloy945 plate; Incoloy alloy945 sheets; Incoloy alloy945 tube; Incoloy alloy945 pipe;Incoloy alloy945 flat; Incoloy alloy945 bar
GBG:H945/JIS/UNS:N09945/W.Nr:2.4669
Incoloy Alloy 945 is typically used in high-temperature applications where resistance to oxidation and creep are required. Some of the typical applications include gas turbine components, heat exchangers, furnace muffles, and petrochemical processing equipment.
Conclusion
Incoloy Alloy 945 is a high-temperature alloy with excellent resistance to oxidation and creep. Its chemical composition and mechanical properties make it suitable for use in high-stress environments at elevated temperatures. Its wide range of applications makes it an important material in the aerospace, petrochemical, and power generation industries.
Silver Gain Technology Co., Limited has been specializing in design and manufacture the cold pressure welding machine and dies for wire and cable industry, alloy wire and transformer customer for years. The cold pressure welding technology is a fast, easy and cost-effective method of bonding non-ferrous wire and strip, without using heat, fillers and fluxes. All electric components are passed CE certificate, our cold welder can join copper from 0.10mm to 13.00mm, aluminum from 0.10mm to 25.00mm.
Hopefully we can establish business relationship in the future.
Portable cold welder Model: PB10
1.Industry standard, light hand held welder for use in narrow spaces.
2.Supplied with carry case
3.Material: cast stainless steel.
4.Capacities: Copper/Aluminum wire: 0.10mm-0.50mm
5.External dimension: L110mm* W62mm*H150mm
6.Net Weight: 680g
Desk cold welder Model: DA100
1.Welder can be bench or trolley mounted for ease of movement
2.Double cavity dies available up to 2.50mm
3.Material: cast steel.
4.Capacities:
Copper wire: 1.00mm-3.25mm Aluminum wire: 1.00mm-5.00mm
5.External dimension: L310mm*W190mm*H315mm
6.Net weight: 37kgs
440 steel is a martensitic stainless steel. The carbon content is 1.0%, and the chromium content is 16-18%. Strong anti-rust ability, high-quality stainless steel, 440 is high-strength knife steel, slightly higher carbon content, can obtain higher yield strength after proper heat treatment, hardness can reach 58HRC, belongs to the hardest stainless steel. The most common application example is "razor blades". There are three commonly used models: 440A, 440B, 440C, and 440F (easy to process)
440 stainless steel is a type of high carbon martensitic stainless steel that offers excellent hardness, wear resistance, and corrosion resistance. It belongs to the family of stainless steels that contains a high percentage of carbon (between 0.6% to 0.75%), which contributes to its hardness and strength.
Some of the key properties of 440 stainless steel include:
Hardness: 440 stainless steel has a high level of hardness, making it ideal for use in applications that require resistance to wear, abrasion, and deformation.
Corrosion resistance: 440 stainless steel offers good corrosion resistance, although it is not as corrosion-resistant as austenitic stainless steels.
Magnetic properties: 440 stainless steel is magnetic, which makes it suitable for use in applications where magnetic properties are required.
Toughness: 440 stainless steel has good toughness, which means that it can withstand impact and shock without cracking or breaking.
Some of the common applications for 440 stainless steel include:
Cutlery and knives: The high hardness and wear resistance of 440 stainless steel make it ideal for use in cutlery and knives.
Bearings and valves: 440 stainless steel is often used to make bearings and valves because of its high strength and resistance to wear and corrosion.
Pumps and turbines: The toughness and resistance to wear of 440 stainless steel make it suitable for use in pumps and turbines.
Overall, 440 stainless steel is a versatile and high-performance material that offers excellent hardness, wear resistance, and corrosion resistance. It is well-suited for use in applications where these properties are required, such as in cutlery, bearings, valves, pumps, and turbines.
Here are some of the most common international standards for 440 stainless steel:
ASTM A276: Standard Specification for Stainless Steel Bars and Shapes
ASTM A580: Standard Specification for Stainless Steel Wire
JIS G4303: Stainless steel bars
EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
GB/T 1220: Stainless steel bars
We can provide the following the form:440 stainless steel coil; 440 stainless stee strip;440 stainless stee plate; 440 stainless steel sheets; 440 stainless steel tubes; 440 stainless steel pipe;
440 stainless steel flat; 440 stainless steel bar
60 Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers
Short on time? Let Turbines Generator Transformers Tg Auxiliaries Non Destructi sellers contact you.
