409 stainless steel is a ferritic stainless steel commonly used in machinery, construction and other engineering. Due to the existence of austenite grains, its mechanical properties are greatly improved. And due to the addition of a lot of alloying elements, the strength and hardness are also greatly improved. It has good mechanical properties and high temperature corrosion resistance. It contains 11% chromium, the minimum required to form a passive surface film that makes stainless steel corrosion resistant. It combines good high temperature corrosion resistance with moderate strength, good formability and overall cost. We can provide the following form:409 stainless steel coil; 409 stainless stee strip;409 stainless stee plate; 409 stainless steel sheets; 409 stainless steel tubes; 409 stainless steel pipe; 409 stainless steel flat; 409 stainless steel bar 409 is most commonly used in truck exhaust systems, agricultural equipment, and heat and gas turbine exhaust silencers.
317L stainless steel is an austenitic stainless steel that contains a low carbon content and higher amounts of molybdenum and nickel compared to 304 stainless steel. The low carbon content of 317L reduces the risk of intergranular corrosion caused by sensitization during welding or high-temperature exposure. The higher nickel and molybdenum content of 317L provide superior resistance to corrosion in harsh environments, particularly those containing chlorides or other halides. This makes it suitable for use in chemical processing, pulp and paper manufacturing, and oil and gas refining applications. 317L stainless steel offers excellent toughness, strength, and formability, and is easy to fabricate using standard methods. It can be welded using common welding techniques, and is often used to fabricate complex shapes and components. Some of the key properties of 317L stainless steel include: Corrosion resistance: 317L offers superior corrosion resistance in harsh environments, particularly those containing chlorides or other halides. High-temperature resistance: 317L can withstand high temperatures and thermal cycling without losing its corrosion resistance properties. Strength and toughness: 317L offers good strength and toughness, making it suitable for use in demanding applications. Fabricability: 317L is easy to fabricate using standard methods, and can be welded using common welding techniques. Overall, 317L stainless steel is a versatile and reliable material that is well-suited for use in a wide range of applications where superior corrosion resistance and high-temperature performance are required. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Here are some of the most common international standards for 317L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A403/A403M: Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:317L stainless steel coil; 317L stainless stee strip;317L stainless stee plate; 317L stainless steel sheets; 317L stainless steel tubes; 317L stainless steel pipe; 317L stainless steel flat; 317L stainless steel bar
Stainless steel coils, stainless steel sheet, stainless steel tube, stainless steel bars, other customised products.
CAS NO. 13463-67-7 Content TiO2 for 96~99% Application ''Grade of Middle & High Resin, Paint, Coating, Ink''
Basic Infomation Model NO.: A-01 CAS No.: 13463-67-7 Formula: TiO2 EINECS: 236-675-5 Colour: White Appearance: Powder Transport Package: Woven Bag Specification: 25kg/bag HS Code: 32061110 Product Description A-01 is an anatase titanium dioxide pigment manufactured by the sulfate process. The grade is a fine, dry, white powder with excellent whiteness, strong covering power, high coloring power and good weathering resistance. It's widely used in coatings(Indoor), chemical fiber, plastics(PVC, Masterbatch), paper-making, shoe materials, glass beads and other fields. Physical Properties Property Standard TiO2 Content % 98.5 Color (Compared with standard sample) No lower than Tinting strength % 100 Loss of 105 C % 0.5 Oil absorption g/100g 23 Water-soluble salt content % 0.5 pH value of aqueous suspension 6.5 ~ 8.0 Residue % (0.045mm Sieve pore) 0.05 Resistivity of aqueous extract �©.m 20 Dispersity % 60 Application Coatings(Indoor), chemical fiber, plastics(PVC, Masterbatch), paper-making, shoe materials, glass beads and other fields. FAQ Q1: Are you a manufacturer or trading company A1: We are a professional manufacturer of titanium dioxide and barium sulfate, Ideal New Materials is the sales company and our Q3: When will you deliver A3: It usually takes 5-10 days if the materials are in stock, or 15-20 days if the materials are not in stock, it is based on quantity. Q4: Is there any possible to use my appointed label or package A4: Sure. If needed, we'd like to use label or package according to your requirement. Q5: What about the packing A5: We usually provide woven bags of 25kg/bag. Of course, if you have special requirements for them, we will do it according to your requirements. Q6: How can you guarantee the goods you offer is qualified A6: We always believe honesty and responsibility are basis of one company, so whatever products we provide for you all are high qualified. We provide a factory inspection report for each shipment, and customer's inspection before shipment is supported.
Basic Infomation Grade: B101 CAS No.: 13463-67-7 Formula: TiO2 EINECS: 236-675-5 Colour: White Appearance: Powder Transport Package: Woven Bag Specification: 25kg/bag HS Code: 32061110 Product Description B101 is an anatase titanium dioxide pigment manufactured by the sulfate process for general use. The grade is a fine, dry, white powder with excellent whiteness, strong covering power, high coloring power and good weathering resistance. It's widely used in coatings(Indoor), chemical fiber, plastics(PVC, Masterbatch), paper-making, shoe materials, glass beads and other fields. Physical Properties Property Standard TiO2 Content % 98.5 Color (Compared with standard sample) No lower than Tinting strength % 100 Loss of 105 C % 0.5 Oil absorption g/100g 23 Water-soluble salt content % 0.5 pH value of aqueous suspension 6.5 ~ 8.0 Residue % (0.045mm Sieve pore) 0.05 Resistivity of aqueous extract �©.m 20 Dispersity % 60 Application Coatings(Indoor), chemical fiber, plastics(PVC, Masterbatch), paper-making, shoe materials, glass beads and other fields. FAQ Q1: Are you a manufacturer or trading company A1: We are a professional manufacturer of titanium dioxide and barium sulfate,
Stainless steel bar 1.Stainless steel tube 2. Stainless steel stair accessory series 3. Handrail accessory series 4. Elbow 5. Handrail bracket 6.Joint 7. Fixed base 8. End cap 9. Handrail ball 10. Glass clamp 11. Door decoration series 12. Stainless steel tube series 13. Round tube 14. Compressed tube 15. Decoration tube 16. Special tube 17. Stainless steel staircase column series 18. Balustrade Packed with the plastic bag and paper box
Stainless steel & Carbon steel Flat bar Standard:JIS, ASTM, AISI, UNS, KS, IS Grade: stainless steel:201, 202, 304, 304L, 316L, 430, 409 ,2205 ,2507 carbo steel: Q195, Q215, Q235, Q255, Q275 Surface: NO.1 , POLISHED Thickness: 0.3~200mm Width: 1~2500mm If you are interested in our products,pls contact me.
Aluminium Profile Quarter Round Bar Basic Info Product Description Products and surface treatment of aluminium pipes tubes we focus on: Anodized, wood grain, powder coating, anodized polished and brushed, electrophoresis, flurocarbon powder coated. Aluminum profile 1/4 quarter round tube for office parts/window corner, Aluminum quarter round extrusion profiles for windows and doors
Incoloy is a nickel-chromium-iron alloy, which is a nickel-iron-chromium iron-nickel-based corrosion-resistant alloy designed for anti-oxidation and carbonization when the temperature rises. This alloy is used in high-temperature water vapor, including steam-air-CO2 In mixed gas, it has good corrosion resistance. In some high-temperature and high-pressure water media, its stress corrosion resistance is significantly better than 18-8 stainless steel and Inconel600; it also has good corrosion resistance in H2+H2S media. In the alkaline medium containing NaOH, its stress corrosion resistance is better than high-nickel alloys such as Inconel600.
Alloy 690 has excellent resistance to intergranular corrosion and intergranular stress corrosion cracking, and is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants. The material of the steam generator heat transfer tube of the pressurized water reactor nuclear power plant has undergone a development process, including 304 austenitic stainless steel, 600 alloy, 800 alloy and 690 alloy. In-service corrosion failures of Alloy 600 show that intergranular corrosion and intergranular stress corrosion cracking are the main problems. Alloy 690 as Heat Transfer Tube Material of Steam Generator in Pressurized Water Reactor Nuclear Power Plant. Inconel 690 is a high-temperature alloy, also known as UNS N06690. Some international standards and specifications for Inconel 690 include: American standards: ASTM B166, ASTM B564, ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B514, ASTM B751, ASTM B670, ASTM B366, ASME SB-166, ASME SB-564, ASME SB-167, ASME SB-829, ASME SB-517, ASME SB-775, ASME SB-163, ASME SB-514, ASME SB-751, ASME SB-670, ASME SB-366 European standards: EN 2.4642, EN 2.4641, EN 2.4856, EN 2.4858, EN 2.4859, EN 10216-2, EN 10217-2, EN 10216-5, EN 10217-5, EN 10088-1, EN 10095, EN 10222-2, EN 10269, EN 10272, EN 10297-2, EN 10302, EN 10312 Japanese standards: JIS G4801, JIS G4804, JIS G4805, JIS G4802, JIS G4311, JIS G4312, JIS G4313, JIS G4321, JIS G4322, JIS G4323, JIS G4308, JIS G4318, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G3446 Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. We can provide the following the form:Inconel690 alloy coil; Inconel690 alloy strip;Inconel690 alloy plate; Inconel690 alloy sheets; Inconel690 alloy tube; Inconel690 alloy pipe;Inconel690 alloy flat; Inconel690 alloy bar GB:GB/T14992;JIS:G4801;UNS:N066902.4642
316L stainless steel is a type of austenitic stainless steel alloy with a low carbon content, making it resistant to sensitization, which is the formation of grain boundary carbides at high temperatures, causing intergranular corrosion. The alloy is commonly used in various industries, including chemical, pharmaceutical, and medical, due to its excellent corrosion resistance and good mechanical properties. The chemical composition of 316L stainless steel typically includes 16-18% chromium, 10-14% nickel, 2-3% molybdenum, and less than 0.03% carbon. The addition of molybdenum provides increased corrosion resistance to pitting and crevice corrosion, making it suitable for use in aggressive environments. 316L stainless steel is known for its high corrosion resistance to a wide range of chemicals, acids, and alkalis, and is particularly resistant to chlorides, making it an ideal material for use in marine environments. It is also known for its excellent high-temperature strength, which makes it suitable for use in high-temperature applications such as heat exchangers. In terms of mechanical properties, 316L stainless steel has a minimum tensile strength of 485 MPa (70 ksi), a minimum yield strength of 170 MPa (25 ksi), and a minimum elongation of 40%, making it a strong and ductile material that can be easily formed and welded. Its resistance to high temperatures and thermal expansion make it ideal for use in high-temperature applications. Overall, 316L stainless steel is a versatile and reliable material that offers excellent corrosion resistance, high-temperature strength, and good mechanical properties, making it suitable for a wide range of industrial applications. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Indian Standard: IS 6911:2017 Here are some of the most common international standards for 316L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:316L stainless steel coil; 316L stainless stee strip:316L stainless stee plate; 316L stainless steel sheets; 316L stainless steel tubes 316L stainless steel pipe; 316L stainless steel flat; 316L stainless steel bar
Inconel 617 is a mixture of nickel, chromium, cobalt and molybdenum, high levels of nickel (44.5% minimum) and chromium (20-24%) give this alloy good resistance to reducing and oxidizing media. Cobalt (10-15%) and molybdenum (8-10%) combine to strengthen the solid solution. A small amount of aluminum (0.8-1.5%) is also included and works with chromium to provide good resistance to oxidation at high temperatures. One of the alloy's key properties is that it maintains high levels of strength even at elevated temperatures without compromising its corrosion resistance. The material is also very functional, as it can be easily formed and welded using traditional techniques. Here are the standard grade and execution standards for Inconel 617 in various countries: American standard grade: UNS N06617 Execution standards: AMS 5887: Melting material for nickel-based high-temperature alloys. AMS 5888: Inconel 617 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5889: Seamless and welded Inconel 617 tubes. AMS 5608: Inconel 617 bars and shapes. ASTM B166: Standard specification for nickel and nickel alloy rod, bar, wire, and strip. ASME SB-166: Same as above. European standard grade: NiCr22Co12Mo9 (2.4663) Execution standards: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat resisting steel and technical conditions for the delivery of heat resisting alloys. EN 10269: Technical delivery conditions for high temperature and corrosion resistant steels. EN 10204: Standard specification for metallic products - types, batch numbers and grade certificates. EN 10302: Technical delivery conditions for nickel alloy bars, hot rolled, forged, and cold worked. Japanese standard grade: NCF 617 Execution standards: JIS G4902: Standard specification for seamless and welded nickel alloy pipes. JIS G4903: Standard specification for seamless and welded nickel alloy pipes. Chinese standard grade: GH617 Execution standards: GB/T 14992: Standard specification for seamless and welded nickel alloy pipes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel pipes and welded steel pipes for hydraulic transmission. These execution standards specify the technical requirements for Inconel 617 material such as chemical composition, physical properties, processing, and testing requirements, ensuring its quality and performance meet the specified standards. We can provide the following the form:Inconel617 alloy coil; Inconel617 alloy strip;Inconel617alloy plate; Inconel617 alloy sheets; Inconel617alloy tube; Inconel617 alloy pipe;Inconel617 alloy flat; Inconel617 alloy bar EN:NiCr22Co12Mo9;JIS:NCF617;UNS:N066171;W.Nr:2.4663a
Monel K500 Monel alloy is a high-strength nickel-copper alloy with excellent corrosion resistance. Its main components are nickel and copper, and it also contains a small amount of beneficial elements such as aluminum, iron, and titanium. This alloy not only has corrosion resistance, but also has excellent mechanical properties, high strength, hardness and toughness, and can withstand high temperature, high pressure and corrosion in marine environments. Monel K500 alloy is widely used in marine and subsea oil and gas industry, machinery manufacturing, aerospace and other fields. Compared with other nickel-copper alloys, Monel K500 alloy is more corrosion-resistant. It can resist the erosion of nitric acid, seawater, alkaline solution and other media, and can also maintain stable performance under high temperature and high pressure conditions. Due to its low magnetic properties, Monel K500 alloy is also widely used in the electrical and electronic industries. In addition, it also has good weldability and processing performance, and can be formed and manufactured by various methods such as casting, forging, and cold working, so as to meet the manufacturing needs of complex workpieces in different industrial fields. In general, Monel K500 alloy has good corrosion resistance, high mechanical strength, excellent stability and comprehensive performance, and is a very excellent high-performance alloy material. With the continuous development and innovation of science and technology, Monel K500 alloy has a very broad application prospect in the future, and will bring more benefits to human production and life. American standard designation: UNS N05500, Specifications: ASTM B865, ASTM B164, ASTM B127, ASTM B165, ASTM B564, ASTM B865, ASTM B366, ASTM B865, AMS 4676, AMS 4676, AMS 4677, AMS 4677, AMS 4678, AMS 4678, AMS 4679, AMS 4679. German standard designation: W.Nr. 2.4375, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW5500, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS321, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloyK500 coil; Monel alloy K500 strip;Monel alloy K500 plate; Monel alloy K500 sheets; Monel alloy K500 tube; Monel alloy K500 pipe;Monel alloy K500 flat; Monel alloy K500 bar GB:NS321; JIS:NW5500; UNS:N05500; W.Nr:2.4375
Inconel 622 is a nickel-based superalloy composed of nickel, molybdenum, cobalt, tungsten and other elements. The nickel content is about 60%. It is a general-purpose Ni-Cr-Mo-W alloy with overall corrosion resistance superior to other existing Ni-Cr-Mo alloys, including Hastelloy C-276, C4 alloy, and 625 alloy. Inconel622 has good resistance to pitting corrosion, crevice corrosion and stress corrosion cracking. It has excellent oxidation resistance in aqueous media, including wet chlorine, nitric acid or mixed acids containing chloride ions. Standard grades and specifications for Inconel 622: US standard grade: UNS N06622 Specifications: AMS 5540: Inconel 622 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5713: Inconel 622 bars and profiles. AMS 5714: Inconel 622 seamless and welded tubes. ASTM B168: Standard specification for nickel-chromium-iron alloys (UNS N066xx) plate, sheet, and strip. ASME SB-168: Same as above. European standard grade: NiCr21Mo14W (2.4856) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steels and heat-resisting materials. EN 10269: Technical delivery conditions for steel alloys intended for use in high temperature and corrosive environments. EN 10204: Standard specification for type, batch, and quality certificates for metal products. EN 10302: Technical delivery conditions for hot rolled, forged, and cold worked nickel alloy bars. Japanese standard grade: NCF 622 Specifications: JIS G4902: Standard specification for seamless and welded nickel alloy tubes. JIS G4903: Standard specification for seamless and welded nickel alloy tubes. Chinese standard grade: GH3622 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14995: Standard specification for hot rolled, forged, and cold worked nickel alloy plates, sheets, and strips. GB/T 14996: Standard specification for nickel alloy bars and profiles. These specifications define the technical requirements for the chemical composition, physical properties, processing, and testing of Inconel 622 material to ensure its quality and performance meet the specified standards. We can provide the following the form:Inconel622 alloy coil; Inconel622 alloy strip;Inconel622alloy plate; Inconel622 alloy sheets; Inconel622alloy tube; Inconel622 alloy pipe;Inconel622 alloy flat; Inconel622 alloy bar EN:NiCr21Mo14W;JIS:NAS NM22;UNS:N06022;W.Nr:2.4602