Technical Parameters: Capacity (L) 100-600L Power, kw 20~30 Design temperature, 0~180 Voltage 380V
Main characteristics The mixer adopts far-infrared plate heating, uniform heat transfer, surface of barrel is coated with non-stick layer, the mixing effect is better. Equipped with automatic temperature control system, temperature adjustment is more convenient. Technical Parameters: Model Production capacity Temperature control range Overall power Dimensions,mm Weight,kg RDBTJ-400W 3-8kg/time 0~130° 4.1kw 800Ã?1400Ã?820 120 RDBTJ-400 3-8 0-130 4.1 800*1400*820 320 RDBTJ-460W 5-12kg/time 0~130° 4.1kw 800Ã?1460Ã?1020 138 RDBTJ-650W 12-20kg/time 0~130° 4.1kw 800Ã?1650Ã?1600 160
Features: 1. Transverse wind cycle structure, conducive to air mixing, high space utilization, fast drying rate. 2.Convenient operating, fixed value operating, timing operating, automatic stop. 3. The special function keys to achieve temperature setting. 4. Auxiliary menu, realized over-temperature alarm, deviation correction, menu locking. 5. Forced fan cooling intake structure, so that the maximum operating temperature of the fan doesnt exceed 50C. Long service time. 6.Corrosion resistance, furnace using high-quality anticorrosive coating. Technical parameter: Temperature Control Range: DG series: Room temperature +10~250C WG series: Room temperature +10~300C Temperature fluctuation: 1C Operating Ambient temperature: 5~50 C Security Over-temperature alarm, Menu locking
Features 1.Adjustable door lock, self-suitable observation window frame, disposable molding silicone seal, to ensure long-term stable sealing. 2. PID temperature control instrument, more accurate. 3. The special function keys to achieve temperature setting. 4.Auxiliary menu, realized over-temperature alarm, deviation correction, menu locking. Technical parameter: Temperature control range: room temperature +10~250C Temperature resolution: 0.1C Constant temperature volatility: 1C Vacuum degree:133Pa Max.
The machine is based on the principle of generating particle and density segregation phenomena during granular material fluidizing. The air pressure, amplitude and other technical parameters are adopted for stratifying the materials through mutual transformation. Materials with large proportion can settle, and materials with small proportion can drift upwards. The seed sorting vehicle can be applied for discharging materials with different proportion from different parts after materials enter into the material discharge zone, thereby sorting seeds. The seed sorting vehicle is widely used in seed processing and grain processing industries. It has good selection effect on grain seeds, tree seeds, cotton oil seeds, etc., which can also be used for eliminating grass seeds, sand grains, stones and soil blocks with geometric size less than 2MM. The 1000-grain weight, germination rate, purity and uniformity of sorted seeds are significantly improved, especially the sorted wheat, corn, rice, cotton, sorghum, beans, rape, vegetables and other seeds can achieve better effect through sorting by the sorting vehicle after basic cleanin The seed sorting vehicle has the advantages of reasonable design, good technical index, high efficiency, easy operation, convenient movement, reliable operation and good generality. It is especially provided with a vibrator made of high-quality aluminium alloy materials. The machine is in the domestic advanced level.
The machine is used for processing and classifying materials according to the principle of generating different sliding friction coefficients and the rolling friction coefficients of materials according to different material shapes and proportions under the effect of gravity acceleration. The longitudinal and transverse inclination angles can be adjusted arbitrarily. Stepless speed regulation is especially suitable for round grain type, and it has especially excellent processing effect to soybeans. The following irregular grain shapes can be selected at a time such as: stones, sand, broken grains, etc.
The machine integrates lifting, screening, air separation (double air separation), dust removal, specific gravity, etc. It is widely used in grain selection and seed processing industries, which is suitable for the selective processing of commodity grains and seeds such as corn, wheat, rice, sorghum, millet, soybean, rape, etc. Main characteristics: Novel horizontal vibrating air screen technology is adopted in 5 XFZ - 15B compound sorting machine. It has main characteristics that vertical air screen one-time suspended settling separation is transformed into secondary suspension settlement separation. A vibrating screen refining conveyer is adopted. Materials are layered under the action of vibration and air flow. Lighter materials float at the top, the heavier materials settle down, which is beneficial for eliminating light materials. The horizontal vibrating air screen has higher cleaning effect and air volume utilization ratio than the vertical air screen under the same power fan as well as the same air volume and pressure parameters compared with the vertical air screen, and it belongs to the substitute technology of the vertical air screen. 1.High technical content: it integrates the functions of wheat hulling ( awn removal for rice), feeding, wind separation, specific gravity separation, etc. The machine has high finished product purity and quality. Its comprehensive performance is in domestic advanced level. 2.High productivity: it is characterized by fast processing speed, short cycle and high efficiency, which is especially suitable for purchasing processors, stir-fry enterprises and seed enterprises, etc. 3.Wide adaptability: The machine has good cleaning effect on melon seeds (sunflower seeds, black melon seeds, white melon seeds, red melon seeds, etc.), beans, wheat, corn, rice and other granular materials. 4.The product is green and environmental-friendly, which is equipped with a spiral dust removal system. Dust, light impurities and other materials can be settled and discharged in a centralized mode without pollution. 5.The product is equipped with wheat hulling or rice awn removal devices. It is a multi-purpose machine.
It is used for removing impurities such as shrivelled seeds, blistering grains, moth-eaten grains, mouldy grains and diseased grains from wheat, corn, rice, melon seeds and various beans.
Machine introduction. Double screw extruder machine is used to produce the different puff snacks, chips snacks, bugles snacks, animal feed, soya protein, nutrition powder, and so on. Machines consist of Materials Feed System, Extruder System, Heating System, Cut System,Control System.
peanut butter filling machine supplier-Yufeng Yufeng INB-M is a filling machine for injecting soft food. Extremely wide scope of application, like peanut, cream, jam and etc. Have the equipment to recycle the regulating handle, injection feeding quantity can be adjusted, and injection of high precision, maximum injection rate of up to 480ml. Standard hopper capacity 6L Voltage range 90-132VAC/180-264VAC Frequency 47-63Hz Power About 200W Working temperature 5~70 Humidity 20-90%RH, non-condensation Size 390*460*230mm
1.Preprocessing system:â? Elevator â?¡Crusher â?¢Force feeder â?£Spiral dehydrator. 2.High temperature aerobic fermentation system:â? Kitchen waste bio-treatment device â?¡Anti-corrosive blower. 3.Effluent treatment system:Waste gas treatment equipment. 4.Oil-Water Separator. 5.Electric control system:â? Automatic control and remote monitoring system â?¡Power cabinet cable. 6.Auxiliary System.
1.Preprocessing system:â? Elevator â?¡Crusher â?¢Force feeder â?£Spiral dehydrator. 2.High temperature aerobic fermentation system:â? Kitchen waste bio-treatment device â?¡Anti-corrosive blower. 3.Effluent treatment system:Waste gas treatment equipment. 4.Oil-Water Separator. 5.Electric control system:â? Automatic control and remote monitoring system â?¡Power cabinet cable. 6.Auxiliary System.
New Design Ozone Air Bubble Vegetable And Fruit Washing Machine 3.75KW Product introduction and working principle: Air bubble cleaning machine is mainly through the bubbling, surfing and cleaning spray three way clear, make wash bean sprouts cleaner, more thorough. Air bubble cleaning machine made by the stainless steel material, with high pressure fan, high pressure water impact, vegetable soak, clean, desalting effect. Product Features: 1. Air bubble washing machine has been widely used in food processing industry,which helps to solve the washing problems of vegetables,fruits,seafood,etc. 2. This machine is made of 304 stainless steel and mainly consists of motor,gear box,water pump,water tank and spraying pipes with nozzles. 3. The output is 300-5000kgs/h. 4. It's designed for various fruits and vegetables of different shapes.The air bubble and water pressure sprays can rinse the materials to avoid colliding with each other.The materials are soaked into the water and subjected to thorough agitation by powerful blower to remove dust and foreign particle. 5. The materials are washed by the high pressure water intensively,high effectively,and continuously.It's indispensable washing machine for fruit and vegetable or seafood processing. 6. The air bubble washing machine could be used for all kinds fruits and vegetables washing and could be configured in line with: Peeling Machine- Air Blower Drying Machine-Cutting Machine- Dehydrator - Grinding Machine -Packing Machine etc. Product Parameter: Name Type Size(mm) Weight(kg) Power(kw/v) Capacity(kg/h) QP-500 2500*1000*1300 250 3.75/380(220) 500 QP800 4000*1200*1300 400 4.1/380(220) 800 QP1500 5000*1200*1300 500 5.1/380(220) 1500 QP2000 6000*1200*1300 600 5.5/380(220) 2000 Note: we can make this machien as your requirements,and we can provide you Customized service
Best quality HDF Machinery Supply Nut Slicer Peanut Rice Slicer 2.2kw Product Description: This machine is used to cut peanuts or almonds into slices and the thickness of the sheet is adjustable. The machine has large capacity, fast cutting speed, convenient operation, advanced technology and complete functions, and is suitable for all kinds of nuts. Specifications: Brand HDF Cutting thickness 0.05-1.2mm Capacity 200-300kg/h Working speed 600r/min Weight 160KG Dimension 650*600*1100mm Power 2.2kw Voltage 220v/380v Features: 1. The blade is made of high-quality high-speed steel, with sharp edge and long service life. 2. The fruit slicer is a special equipment for slicing nuts such as peanut kernels, almonds, cashew nuts, and walnut kernels. 3. The fuselage cover is made of stainless steel plate and meets food hygiene requirements. The parts in contact with the material are all food grade stainless steel. 4. Slice thickness can be adjusted at will.
Multifunction Electric Vegetable Slicer Potato Chips Cutter Machine for Home Use Product description: he Potato Chips Cutter Machine is suitable for slicing of medium-sized, long cylindrical materials (such as yam, lotus root, cassava, sweet potato (sweet potato), radish) with good cut surface quality, thin and uniform size, and cut tissue. Fresh, does not damage fibrous tissue.At the same time, the mushroom slicer machine has high slicing efficiency, convenient operation, low energy consumption, health, safety and high efficiency, and is an ideal equipment for agricultural product processing. It mainly consists of a frame, a rotating cutter head, a transmission part, a motor, a discharge port, etc. Operating procedures: 1. Before starting the machine, you must check whether the protective equipment and power supply are in good condition.Whether there are hard objects and foreign objects on the belt. 2. After starting, it must be observed for 12 minutes, and it can be used after it is running normally. 3. When the machine is running, it is strictly forbidden to put your hand into the search or under the vertical knife to ensure personal safety. 4. The amount of food should be evenly distributed to prevent clogging. If the dish is found to be blocked.It must be stopped before it can be cleaned. 5. When cleaning up, when cleaning up the residue, the power must be cut off.Into the electrical equipment, so as to avoid water ingress and moisture, leakage occurs. 6. After the end of each day, the mechanical transmission and sliding parts must be cleared and add oil once. 7. It is strictly forbidden to dismantle the protective fence and protective cover without authorization.Bad or mechanical failure should be reported to the repair department in time. Application: The potato chips slicing machine is used for slicing root based vegetables and fruits into uniform round slices. Such as cassava,cucumber,sweet potato,turnip,carrot,lotus root,eggplant,onion,potato,tomato apple,lemon,kiwifruit,banana etc. The multi-function cutting machine can cut long strips of onions, garlic, scallions, celery, vegetables, Chinese cabbage, fish, dried beans, spinach, banana slices, melons and so on. Another change of the cutter disc can be used to cut roots and vegetables, such as bamboo shoots, radishes, potatoes and other shredded slices. Suitable for central canteens and vegetable processing industry. Product name Potato chips cutting machine Capacity 300-1000kg/h Power 220v/1.5kw Number of blades 6 Material 304 Stainless steel Dimension 1000*900*580mm Weight 75kg
Mutuality-function SS 304 brush root vegetable washing peeling machine 1. Product descriptions: 1). Large capacity with high peeling ratio potato washing and peeling machine has two functions of peeling and washing. It is mainly composed of motor, speed changer and 9 rollers. It adopts brushing principle and can brush the root vegetables in a short time with low breaking rate. 2). It is suitable for root vegetables and fruits, such as potato, sweet potato, radish, carrot, cassava, apple, kiwi fruit, stem, ginger, taro, root-stock materials, etc. The machine applies to vegetable processing plant, fruit processing factory and restaurant, etc. 3). This machine can continuously peel and wash. It can save water than before and without pollution. This machine has features of perfect appearance, easy operation, high efficiency, low breaking rate and high peeling ratio. It is made of food grade stainless steel with long service life and durable structure. 3. The technical of the Root vegetable peeling and washing machine: Model Power Dimension Weight Capacity HDF700 1.1kw/380v 1580*850*800 180kg 700kg/h HDF1000 1.5kw/380v 1780*850*800 220kg 1000kg/h HDF1200 1.9kw/380v 1980*850*800 240kg 1200kg/h HDF1500 2.2KW/380V 2280*850*800 260kg 1500kg/h HDF1800 2.6KW/380V 2580*850*800 280kg 1800kg/h HDF2000 3.0KW/380V 2780*850*800 300kg 2000kg/h
Automatic Puffed Snacks Fryer Continuous Frying Belt Food Processing Machine Products Description The automatic puffed snacks fryer is made of food grade stainless steel. It consists of stainless steel belt, control panel, motor and reducer, stainless steel frame and so on. The heating temperature and frying time can be adjusted according to your requirements. At the same time, the process is fully automatic, just press the control button. In addition, the machine uses advanced technology to save grease and maintain the taste and color of the food. Advabtage 1. Made of stainless steels 2. Automatic oil temperature control 3. High heating efficiency 4. Can filter the dregs automatically 5. Can be equipped with circulation-filtering system 6. Heating way can be electricity, LPG, gas 7. Electricity leaking protector 8. When the temperature anomaly, the safeguard will work and give an alarm. Feature 1.Continuous automation frying production line has solved many drawbacks like labor intensive, low yield, disunion of product quality in the frying production process of traditional pastries. 2.The feeding conveyor can be matched with front-end forming equipment, which can reduce the influence of manual operation to the quality of the goods; this equipment is available to be adjusted the frying time and the oil temperature can be subdivision controlled. 3.the automatic residual-removing system can be used for avoiding the burned residual, so as to extension of the cooking oil using life; automatic lifting device convenient to clean and maintain. 4.Cooling conveyor belt can drain the surplus oil in the products and cool them rapidly, easy to pack and save labor force. The matched equipment can choose online filtering, mixing sugar seasoning and other equipments. 5.Coal, natural gas, electricity, liquefied gas; light oil, heavy oil and new biomass granular fuel can be used to provide heat source and this equipment can be customized according to the production volume, processing technology, workshop distribution of the clients and so on. Technological Parameters Model HDF-F300 Output 100-2000kg/h Dimension 5670*1530*2284mm Power 75kw Voltage 220v/380v Material 304 SUS Product usage Puffed snack frying equipment Application Potato chips, fritters, twists, puffed snacks Electricity consumption 2 degrees per hour Fried time Continuous fryer Packing Wooden case packing Scope of application Food production plant,fruit and vegetable processing factory
High Efficiency Puffed Chips Nut Powder Flavoring Seasoning Mixer Popcorn Seasoning Machine Products Description Our seasoning machine is suitable for all kinds of food seasoning, feeding, hanging pulp, etc. The octagonal mixer is used for the mixing of seasoning powder in the later stage of food processing or the coating of the raw material and the blending. The structure is simple and practical. The barrel is made of stainless steel octagonal design, which can make the food materials and materials to be processed in a short time. It is necessary to mix the ingredients thoroughly, and the material is automatically discharged. It is convenient to clean and disinfect without dead angle. Application: Widely used for seasoning and mixing different kinds of food, essential equipment for processing fried peanut, potato chips, chicken feet and other food. Automatic Small Potato Chips Processing Seasoning Machine For Sale Price design for the octagonal shape, to avoid the disadvantages of ball rolling material seasoning machine. The pulverized machine can realize the function of automatic mixing, so it is also known as the "drum type food seasoning machine", which is convenient to use. The seasoning machine is made of stainless steel. Feature: 1. Automatic discharging system, and easy to operate and maintain; 2.PLC and a touch screen to realize automatic feeding. 3. Made by fully stainless steel. 4. The machine can mix and season food evenly, with high output. 5.Automatic feeding, mixing and discharging are realized. 6.The frequency converter is adopted to achieve different speed requirements for starting, stirring and discharging. 7. There are three types: disc type, octagonal type and drum type. 8. The diameter and length of drum can be customized according to your needs. Parameter: Model HDF-700 HDF-800 HDF-1000 Voltage 220v 220v 220v Power 0.75kw 1.1kw 1.5kw Weight 750kg 115kg 140kg Capacity 100kg/h 120kg/h 200kg/h Dimension 1000*700*1400mm 1200*800*1500mm 1410*1000*1700mm
Commercial Electric Countertop Deep Fat Fryer Energy Saving Plantain Chips Onion Fryers Introductions 1.This potato chips frying machine adopts water-oil separator which can keep the oil clean and continuous working. The oil and water temperature can be controlled automatically. 2.This machine can fry all kinds of foods without the Taint of odor. No oil smoke, this can ensure the health of the operator. 3.This potato chips frying machine is with characteristics of controlling the temperature automatically, even heating, can keep stable temperature and the nutrition of frying foods. Easy operation, one person can operate it. 4.This potato chips frying machine is made of 304 stainless steel materials, with long service life and can reach the hygiene standard. Feature: The frying equipment is an automatic fryer. The oil-water mixing technology keeps a small amount of steam underneath the oil layer, and penetrates into the oil layer to add moisture to the frying oil, so as to prevent the oil from volatilizing in large quantities; the frying method of the frying pan and frying equipment and automatic heating of the frying pan in the casserole can be arbitrarily adjusted as needed. The electronic control device controls the upper and lower temperatures, effectively relieves the oxidation of the frying oil, inhibits the generation of acid media, thereby prolongs the life cycle of the frying oil, reduces waste, and saves more than 50% of oil compared to traditional frying machines while reducing air pollution. Parameter: Model HDF-D100 HDF-D1300 HDF-D1500 Dimension 1750*1500*1500mm 2100*1850*1600mm 2300*2100*1600mm Power 51kw 63kw 81kw Capacity 70-100kg/h 100-150kg/h 180-250kg/h Weight 450kg 620kg 830 Heating method Electric/Gas Electric/Gas Electric/Gas Advantage: Potato chip fryer equipment is suitable for fried foods such as fried chicken, fried steak, fried lamb chops, and French fries. It is easy to operate, environmentally friendly, and has a high fuel economy. It is suitable for food processing plants, large and medium-sized hotels, restaurants, guest houses at all levels, schools, canteens and other food service industries
Carrot Vegetable Washing Machine Sweet Potato Peeler Automatic Potato Peeling Machine Description: Potato peeling machine also known as brush cleaning machine, is suitable for cleaning and peeling various root vegetables such as carrots and potatoes. The vegetables are poured into the washing machine, and are fully dispersed, tumbling, rubbed and cleaned under the action of high-pressure water flow and brush rolling. The sediments eluted from the surface of the material directly fall into the equipment dust box with the flushing of the water flow, and are discharged through the large-diameter pipe, and the cleaning effect is good. Application: Peeling and washing machine:To remove skin of potatoes Brush cleaning and peeling machine is suitable for carrot, ginger cleaning and peeling and electric potato cleaning and peeling machine related to hard vegetables. It uses the rotation of the hair roller to remove the dirt attached to the carrots and other vegetables. The large brush potato peeling machine is provided with a spray water pipe on the upper part of the peeling machine, and the brush cleaning and peeling machine can spray and rinse the materials. At regular intervals, turn on the electric potato cleaning and peeling machine end discharge port, and remove the material. Parameter: Type HDF350 Inlet diameter 220mm Size 660*450*850mm Power 220v/1.5kw Barrel depth 300mm Output 150-200kg/h
