Find Verified Fish Fish Products Suppliers, Manufacturers and Wholesalers

we have been producing kinds of landing net, gaff, keep net, rod holder for many years, 100% goods are exported throughout the world.
please contact us so we could send catalogue for your look.

we have been producing kinds of landing net, gaff, keep net, rod holder for many years, 100% goods are exported throughout the world.
please contact us so we could send catalogue for your look.

we have been producing kinds of landing net, gaff, keep net, rod holder for many years, 100% goods are exported throughout the world.
please contact us so we could send catalogue for your look.

we have been producing kinds of landing net, gaff, keep net, rod holder for many years, 100% goods are exported throughout the world.
please contact us so we could send catalogue for your look.

we have been producing kinds of landing net, gaff, keep net, rod holder for many years, 100% goods are exported throughout the world.
please contact us so we could send catalogue for your look.

Model No.:ZB1205-3
Name plastic single pole fishing rod holder
Material Nylon
Color white / black
MOQ 1 PC
Net weight 0.39 kg/ pc
Packing box + carton
Speficication of plastic fishing rod holder


This fishing rod holder is made in high strength nylon, not cheap ABS plastic

6 each of screws and expansion bolts are included .
This design make installation is easy
The countersunk screws will not scratch your fishing rod.

Smooth surface , no burrs to scratch your boat


is well packed in a box (330x235x65mm ) pass our inspection before shipping to you to make sure you received each single pc is in good condition.
a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.

Model No.:ZB1205-1
Marine Boat Accessories plastic wall mounted fishing rod holder boat fishing black white fishing rod holders
Name plastic single pole fishing rod holder
Material Nylon
Color white / black
MOQ 1 PC
Net weight 0.255 kg/ pc
Packing box + carton
Speficication of plastic fishing rod holder


This fishing rod holder is made in high strength nylon, not cheap ABS plastic
2 each of screws and expansion bolts are included .


The surface is smooth without any burrs.

is well packed in a box (280x170x65mm )

pass our inspection before shipping to you to make sure you received each single pc is in good condition.

a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls,
shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

Model No.: ZB1206
Name plastic single pole fishing rod holder
Material Nylon
Color black / blue/orange / green
MOQ 1 PC
Net weight 0.055 kg/ pc
Packing box + carton
Speficication of plastic fishing rod holder


This fishing rod holder is made in high strength nylon, not cheap ABS plastic
We design 4 fixing holes to make this fishing rod holder fixed the pace you need.
We also design the position for your fishing line.
The buckle here is for belt. Easily to take it anywhere you need.
Each pc is well packed in a box (70x60x210mm )

Each pc pass our inspection before shipping to you to make sure you received each single pc is in good condition.
a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls,
shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

Name plastic single pole fishing rod holder
Material Nylon
Color white / black
MOQ 1 PC
Net weight 0.39 kg/ pc
Packing box + carton
Speficication of plastic fishing rod holder
This fishing rod holder is made in high strength nylon, not cheap ABS plastic

6 each of screws and expansion bolts are included .
This design make installation is easy
The countersunk screws will not scratch your fishing rod.
Smooth surface , no burrs to scratch your boat
Each pc is well packed in a box (330x235x65mm )

Each pc pass our inspection before shipping to you to make sure you received each single pc is in good condition. is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

Name plastic single pole fishing rod holder
Material Nylon
Color black / blue/orange / green
MOQ 1 PC
Net weight 0.055 kg/ pc
Packing box + carton
Speficication of plastic fishing rod holder
This fishing rod holder is made in high strength nylon, not cheap ABS plastic
We design 4 fixing holes to make this fishing rod holder fixed the pace you need.

The buckle here is for belt. Easily to take it anywhere you need.
Each pc is well packed in a box (70x60x210mm )
Each pc pass our inspection before shipping to you to make sure you received each single pc is in good condition. a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.
Most of them can be supplied from stock. Low MOQ is acceptable.

Contact us now for more details

45g-150g tungsten jig lure jigging round head drop shot bead sinkers
Fishing sinkers are usually made of lead with a hook, usually covered with a soft material to attract fish.However, in recent years, tungsten alloys have been increasingly used as fishing sinkers. The high-density tungsten alloy fishing sinker produced with clean metal as raw material has a high specific gravity (>18g/cc) and small size, so it is resistant to strong wind, light in water, and sinks quickly. It is a good substitute for lead sinkers.
Our company provides fishing sinkers, tungsten balls, tungsten sinkers, in various shapes such as water drop, bullet, fish mouth,ball, etc.

We can make all kinds of fishing nets, monofilament and multifilament, knotted and knotless nets, single knots and double knotes. Materials include nylon, polyester, PP, PE , HDPE, etc.

1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.

2. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.

1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.



Construction:



The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.



Operation:



Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.



2. Reverse Circulation Fishing Magnet:



Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.



Construction:



Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select an appropriate guide.

1.Standard Fishing Magnet:

Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.



Construction:



The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.



Operation:



Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.



Optional Accessories:

A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.

1.Standard Fishing Magnet:

Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.



Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.



Operation:



Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.



Optional Accessories:

A flush guide is standard. Lipped guides and mill guides are also available. The lipped guide centralizes the fish to assure contact with the magnet. The mill guide enables milling of any soft formation or settling to free debris at the bottom of the hole.

Releasing and Circulating Overshot
1) Delivery on time
2) Standard export package
3) API-7-1 Standard



LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.

It can according to the customer demands; the net can be designed or made specific to your liking.

Commodity name Metal fishing jig L0401
Material Lead
Weight 180G200G220G250G
Length 150mm160mm170mm180mm
Eye not 3D
Hook As customer request
Action slow sinking
Packing PVC bag
MOQ 100pcs

HDPE geomembrane selects choice PE resin,adding carbon,anti-ageing agents,anti-oxidation agents,UV light absorption agents,stabilizer and other additives,formulating in 97.5% high density PE,2.5% carbon through triple layers co-extrusion technology by most advanced automatic production establishments. There are also LDPE,EVA geomembrane.It can meet the needs of environmental protection,water conservation,construction,municipal infrastructure,gardening,mining industry,salt industry,agriculture,aquaculture.
HDPE Property
High seepage coefficient:HDPE impermeable membrane has impeccable impermeable effect,WVPC K 1.0*10-13g.cm/(cm2.s.pa
Chemical stability:HDPE geomembrane has excellent chemical stability,which is extensively used for sewage treatment,pool chemical reaction,landfill;Anti high and low temperature,anti acid,alkali and salt and another chemicals
Anti-ageing:HDPE geomembrane has superior anti-ageing,UV resistance,anti decomposition competence,can be exposed under air,the shelf life is 50-70 years
High mechanical strength:HDPE membrane has great mechanical strength and excellent flexibility and deformation adaptability,it can overcome the fall result from uneven substrate.Its tensile strength at breaking is 28 MPa,elongation at breaking is 700%;
Highly economical/fast installation and non-toxicity/Applicable temperature range:-70 -70
Application:
Anti-leaking projects of landfill,sewage,waste treatment
Dam,reservoir,drain,tunnel,basement,metro Aquaculture Railway,highway substrate
Specification:
Thickness:0.2-4mm Regular Width:2-6m (Max 8m)
Installation attention
1)Must use embedded type:Coverage thickness won t less than 30 cm
2)Overall anti-leaking system:(Pond)liner,anti-leaking layer,transition layer,protection layer
3)Substrate needs to be solid to avoid falling,crack. Grass and tree roots need to be removed utterly inside the area.Pave the sand or clay as protection layer