The ultra thinnest ballast ROHS and E-MARK 13 Certification Endure 125 degree All of best electrical parts Germany technology 1) Input voltage range : 9V~16V 2) Rated voltage : 13.2V 3) Cold light up current : 6.4A 4) Hot light up current : 4.3A 4) Max. start voltage : 23kV 5) Input current : 3.2A 6) Output power : 40.2W 7) Working temperature : -40~125¿¬pC 8) Size : 5.6cm*5.6cm*0.8cm
The ultra thinnest ballast ROHS and E-MARK 13 Certification Endure 125 degree All of best electrical parts Germany technology 1) Input voltage range : 9V~16V 2) Rated voltage : 13.2V 3) Cold light up current : 6.4A 4) Hot light up current : 4.3A 4) Max. start voltage : 23kV 5) Input current : 3.2A 6) Output power : 40.2W 7) Working temperature : -40~125¿¬pC 8) Size : 5.6cm*5.6cm*0.8cm
The max :45.000rpm 4.5kg 25cm*30cm*28cm
Dimmable electronic ballasts Fl 2x35/220-240v t5 dim-a Dimming range from 1-100% Lamp start at 1% possible Standard dc1-10v control interface (en60929 with earth leakage 0.5ma) Defined lamp friendly warm start within 1.5 s with ac and 0.6s with dc Dc operation in emergency lighting Installations to vde0108 Safe shutdown of defective lamps Safe shutdown of lamps at end of life Automatic restart after lamp replacement Operating frequency ~40-120khz Carton
This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameter. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of Inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive dsp processes and calculates and then Outputs the measurement results on lcd. * multiple parameter measurement: ra, rz, rq, rt * highly sophisticated inductance sensor * four wave filtering methods : rc, pc-rc, Gauss and d-p * built-in lithium ion chargeable battery and control Circuit with high capacity * small in size, light in weight and easy to use * can communicate with pc computer for statistics, Print and analyz by the optional cable and the Software for rs232c interface. *manual or automatic shut down. The tester can be Switched off by pressing the power key at any time. On the other hand, the tester will power itself off About 5 minutes after the last key operation.
Brushless dc gear motor The motor has the advantages of high-efficiency, good mechanical-properties, low-noise, etc. Control circuit put inside has flexibly control methods, wide timing range(10%-100%), and many trouble protection functions. When matched with 37JB reducer, it can attain low-speed, large-torque output. Standard Lot Size , Weight , Dimensions
Xenon hid conversion kits Xenon hid ballast specifications: Maximum input current: start current 6.5a, and then remain stable at 3.2a(for 12v input 35w ballast); Operating ambient temperature range: -40 to 105 íµ; Long life-span: >3000h; Input voltage:7.5-18.5v(special fit for 12v car) , 18-36v(special fit for 24v car) Output power: 35w, 55w; Output voltage:85v Output frequency ac: 250hz; Instantaneous voltage:23- 25kv; Waterproof/shockproof; Output circuit protection: cut off automatically in 1s; Output short-circuit protection: cut off automatically in 1s; Include integrated design of the cover ; Start and short-circuit protection; Low-voltage and over-voltage protection; Constant power output and enhance and ensure the bulb's life; Xenon bulbs: H1, h3 , h3c , h7, h8, h9, h10, h11, 9006(hb4), 9005(hb3), 9008, 880, 881, d1s, d1c, d2s, d2r, d2c, d4s, d4c, motor cycle H4(single beam, h/l halogen/xenon, h/l xenon/halogen, h/l moving 4mm, h/l moving 7mm, dual-xenon) H13(single beam, h/l moving, , dual-xenon), 9004(hb1, single beam, h/l moving, dual-xenon), 9007(hb5, single beam, h/l moving, dual-xenon), Color temperature: 3000k, 4300k, 5000k, 6000k, 8000k, 9000k, 10000k, 12000k, 15000k, 25000k, 30000k. 2kg
PDJ-PST2400-24-06 Frequency range: 2400~2483MHz Bandwidth: 83MHz VSWR: 1.5 Gain: 24dBi Max Power: 100W Polarization: Vertical or Horizontal Horizontal Bandwidth: 10 Vertical Bandwidth: 14 F/B ratio: 31dB Input impedance: 50 Connector: N-K Size: 0.6*0.9m weight: 2.5kg Resist the intensity of wind: 60M/S 0.6*0.9m
Frequency range: 2400~2483mhz Bandwidth: 83mhz Vswr: 1.5 Gain: 24dbi Max power: 100w Polarization: vertical or horizontal Horizontal bandwidth: 10 Vertical bandwidth: 14 F/b ratio: 31db Input impedance: 50 Connector: n-k Size: 0.6*0.9m Weight: 2.5kg Resist the intensity of wind: 60m/s 0.6*0.9m
Frequency range: 2400~2500mhz Bandwidth: 100mhz Vswr: 1.5 Gain: 9dbi Max power: 200w Polarization: horizontal or vertical Horizontal bandwidth: 90 Vertical bandwidth: 8 F/b ratio:25db Input impedance: 50 Connector: n-k Size: 260*160*60(mm) Weight: 1.1kg Resist the intensity of wind: 60m/s 260*160*60(mm)
Moisture meter mc7806 Model: Moisture meter mc7806 Measurement range: moisture content 0-50% Temperature +c10-60f Resolution: 0.1 Accuracy: Moisture: f+(0.5%n+0.1) Temp: f+0.8f Calibration: automatic Power supply: 4x1.5v aa (um-3) battery Dimensions: 182x68x38mm Probe dimension: 170x44x25mm Weight (not including probe):334g Dimensions: 182x68x38mm Probe dimension: 170x44x25mm
Coating thickness meter cm-8823 Application: Product synopsis Measurement range 0200um/500um/1000um/15000um Resolution 0.1/1 Tolerance +(13%n) or +2um Power supply 4x1.5v aa(um-3)battery Dimension 161x69x32
Tachometer Eatures: Measuring rpm is safe & accurate without attachment to object. Wide measuring range & high resolution. Digital display gives exact rpm with no guessing or errors. Used the exclusive micro-computer lsi-circuit and crystal time base to offer the high accuracy measurement & fast measuring time. The last value/max. Value/min. Value will be automatically stored in memory and can be displayed by turn. The use of durable, long-lasting components, including a strong, light weight abs-plastic housing assures maintenance free performance for many years. Product synopsis Model: dt Measuring range: rotative velocity laser . - r/min Contact . - r/min Laser tach detecting distance: - mm Accuracy: f+( . %n+ d) Resolution: . / . / Memory: max/min/last value Power supply: x . V aa (um- ) battery Battery indicator: low battery indicator Dimensions: x x mm Weight (not including probe): g
Phase control thyristors, fast switching thyristors, high frequency thyristors, gate turn-off thyristor, bi-directional thyristors, rectifier diodes, fast recovery diodes, welding diodes, high power module, solid state relay, electronic motor protection relays (electronic overload switch), thermal motor protector / temperature limiter / thermal cut-out, gas discharge tube-coaxial / ceramic / smd, chip & flange mount attenuators / resistors aluminum nitride, coaxial terminations & attenuators.
HPD05 Infrared PM2.5 Sensor Module Product Details 1. Module List HPD05 Module 2. Product Overview HPD05 PM2.5 Sensor Module use principle of optical scattering to measure concentration of dust inthe air,the module built in a Infrared Transmitter and a high sensitive Photoelectric Receiving Sensor the Infrared Transmitter emits light and the light meets the dust to produce the scotch light, theintensity of the scotch light detected by Photoelectric Receiving Sensor reflects the concentration ofdust in the air, HPD05 have two ways to output current concentration data, one is PWM signal (thewidth of signal is the value, 1ms = 1ug/m3), the other is IIC signal(unit is ug/m3). HPD05 can be used for Air Cleaner, Air Conditioner with purifying function, Fresh Air System and air quality testing equipment. 3. Detecting Principle Detecting Principle Per the principle of optical scattering,the Transmitter emits light, and the light meets the dust to produce the scotch light, the high sensitive Photoelectric Receiving Sensor detects the intensity of the scotch light then output intensity signal, current which is proportional to the size and quality of intensity of the scotch light, the current is amplified by amplifier and calibrated by CPU, finally output digital PWM signal or IIC data of concentration of dust. 4. Performance Parameter 1 Characteristics Characteristics Connector CON2 Pin Description Connector CON2 Pin Description 2 Life Life of Light Source: above 5 years with continuous power on. 3 Photoelectricity Characteristics Photoelectricity Characteristics 4 Signal Output a1. PWM signal output(Corresponding Model HPD051Axxx): Signal Output The relation of Low Pulse Time and Dust Concentration: 1ms = 1ug/m3 The pulse width outputted by P1 pin is the average value of Dust Concentration(Lower responding speed, small fluctuation & good stability) The pulse width outputted by P2 pin is the insta
transform between hl/hrc/hrb/hb/hv/hs. store the latest 250 groups measurements. select measured material and way by key. can show measurements repeatedly to remove the large errors. use usb data output with connection pc. provide bluetooth data output choice. Product parameters Accuracy Display error 0.8% at ld=900 Measuring range:200~900 hld Measurable material:9 different common materials Operating temperature:-10°c~50°c°c Relative humidity:90% Size:140x70x30 mm Power supply2x1.5vaaa um-4 battery Weight:130 g (not including batteries)
The shore hardness tester as-120 series including type(a, b, c, d, e, o, do, oo), model complete, with different probe size, use for different measured objects and hardness value, to meet different request for kinds of material hardness measure. integrated design, small volume, light weight, simple structure, easy to use, intuitive readings and automatic shutdown function. with low battery alarm indicator & average value calculation function. auto switch off and manual shutdown. use usb data output with connection pc. provide bluetooth data output choice. Accuracy1h Resolution:0.1h Range:1090h Operating temperature:040°c Size:170x63x24 mm Power supply2x1.5vaaa um-4 battery Weight:310 g (not including batteries)
Designations TIANQIU: LR03 IEC: LR03 Other: AAA, AM-4 Chemical system: Zinc-Manganese Dioxide Nominal voltage: 1.5V Nominal capacity: 1200mAh Shelf life:Three years after delivery under normal storage conditions.
1)tianqiu: l6f22 2)chemical system: zinc-manganese dioxide (potassium hydroxide electrolyte) 3)nominal voltage: 9v 4)nominal capacity: 1100mah 5)dimeension:25.5(l)*16.5(w)*47.5(h) mm 6)weight: 44g 7)service output: Discharge conditions:load resistance 180o, daily period 24h/d, end point voltage 5.4v; Minimum average duration: Initial 11.5h 8)shelf life: three years after delivery under normal storage conditions 9)package:1pcs/card, 10pcs/box, 180pcs/ctn Gross weight:9.8kg Measurement:31*26*26.5 cm
The GSM interception system allows for real-time interception of telephone conversations and text messages sent through a GSM network. It is compatible with GSM 850/900/1800/1900 network and base transceiver stations all over the world. The GSM interception system supports A5.1 and A5.2 encryption algorithms used to encode phone calls over GSM networks. The system's range of operation has a radius of about 2 km, which can be extended up to 5.5 km with additional 50W power amplifiers. The GSM interception system is able to intercept 48/96 target phones simultaneously (with the ability to expand the system to support greater number of targets), depending on RF channels and the number of communication modules (in passive mode). Intercepted calls and text messages can be recorded and subject to further analysis. The device is operated through a PC software suite, included in the package.
