Application OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results. Technical indexes Test range� Film: 0.01-6500 cm3/m2·d (Standard) 0.07-6,5000 cm3/m2·d (Optional) -
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Application GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials. Features Standard Gurley, Low Pressure Gurley, High Pressure Gurley Sheffield units, Bendtsen units Interchangeable test heads Output in seconds, other unit optional Embedded system, remote service Touch screen operation Test data and curve real time display Built in data query function Built in micro-printer to print reports Automatic overload protection. Highly accurate sensors to ensure the accuracy and repeatability. Swagelok piping system, to ensure system tightness and long-term stability Advanced control device, reliable operation and long service life Standard communication interface, configurable professional computer software The calibration can be traceable to ensure the measurability of the test data Support DSM system Technical indexes Test Range: 30,60,000 Gurley seconds,Standard, 0.0021,200um/Pa.s,Standard, 300,60,000Gurley seconds,Optional, 0,60,000 Gurley seconds,Optional, Resolution, 0.1 Gurley seconds Sample Amount, 1 ,Standard,,3 can be customized. Differential Pressure,0.01kPa,20kPa,STD,1.22kPa, Accuracy: 0.01kPa Test Area: 1.0in2. ,0.25in2, 0.1in2 optional, Sample Thickness: ,5mm Test Gas: Air, O2, N2, CO2,Self-provide, Gas Resource: 0.3MPa,1.0MPa Interface: Ф6mm Dimension: 320mm,L,�380mm,D,�410mm,H, Power Supply: AC 220V 50Hz Net Wt. 25 kg Standard ISO 5636.5,ASTM D726, TAPPI T460,TAPPI T536,TAPPI T538,TAPPI T490 Configuration Delivery,Mainframe, Test Head (1.0in2), Super Filter, Precision Pressure Regulator. Optional: Sample Auto Feeder, Calibration Equipment,Test Head(1.0in2), Test Head(0.25in2),Test Head(0.1 in2). Note: Specifications are subject to change without prior notice.
Application GTR-7001 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes. Features Vacuum differential pressure method Patent technology 3 specimens test simultaneously and independently Computer control One-button test, test automatically through whole process High accuracy vacuum sensors embedded in 3 Chambers with independent temperature sensor Test under various RH conditions with Humidity generator (optional) Environment temperature and humidity sensor inside Permeability coefficient ,solubility coefficient and diffusion coefficient test Chambers with water bath temperature control technology Unit based on embedded system,24bit AD Multiple test modes optional Data curves display Traceable reference film calibration Supports DSM system (DSM, lab data management system) Technical Indexes Test range: 0.01 - 190,000 cm3/m2�24h�0.1MPa (Standard) Resolution: 0.001cm3/m2�24h�0.1MPa Samples: 3, independent Vacuum accuracy: 0.1Pa Temperature range: 5C - 95C Temperature accuracy: ±0.1C Humidity range: 0%RH,35%RH-90%RH,100%RH (optional) Humidity accuracy: ±1%RH (optional) Sample thickness: less 5mm Sample size: >= 150mm * 94mm Test area: 48cm2 Test gas: O2, N2, CO2, He, etc Differential pressure: -0.1MPa - 0.1MPa Gas interface: Ф8mm Dimension: 730mm * 510mm * 350mm Power supply: AC 220V 50Hz Net wt. : 63kg Standards ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003 Configuration Delivery: Main unit, computer, G-TRANS software, Temperature controller, vacuum pump(BOC Edwards), tank regulator, PCIE card, communication cable, sample cutter, vacuum grease. Optional: Humidity generator, Reference film, vacuum grease, sample cutter, DSM system.
Application Wvtr-9001 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results. Features Electrolytic sensor method Patent technology Film and package test 3 specimens test simultaneously and independently One-button test, test automatically in whole process Multiple test modes optional Data curves display Computer control Digital flow adjustment 3 chambers with 3 temperature sensors Environment temperature and humidity sensor inside Chambers water bath technology Unit based on embedded system, 24bit î?-î£ ad Pressure, ppm water sensor and temperature overload protection Traceable reference film calibration Supports dsm system (dsm, lab data management system) Standard Iso 15106-3, gb/t 21529, din 53122-2, ybb 00092003 Configuration Delivery: main unit, computer, w-trans software, temperature controller, tank regulator, pcie card, communication cable, sample cutter, vacuum grease. Optional: package fixtures, reference film, vacuum grease, sample cutter, dsm system.
This testing machine is according to iec61058.1, iec60884 and iec60669.1 standards to design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test. Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use, and if there are adhesion phenomena or prolonged closed or disconnected phenomena occur, inspect whether there are excessive wear and other harmful consequences with it. It is the special equipment for switch mechanical life machine and electrical life endurance tester. Parameters 1.Power supply: ac220v10%/50hz or 110v/60hz 2.Station : stations, 1 and 2 station are used to perform switch test (rocker switches and push button switches can switch test, 3 and 4 station are used to perform the plug and socket testingm, all 4 workstation can work independently ) 3.Operation interface: 7-inch color lcd touch screen 4.Drive mode: pneumatic, 58kg/cm2 5.Control systems: plc control 6.Preset times: 0999999s, can be preset 7.Test times: displays the current number of trials 8.The on time: 099.9s, can be preset 9.The off time: 099.9s, can be preset 10:travel time: mechanical adjustment, take the cylinders maximum stroke position 11.Test rate: adjustable valve, about 0.2s / times 12.Atmospheric pressure : 80106kpa 13.Environment temperature:540 14.Relative humidity : ( 2090)%rh 15.Working place: no violent shaking, vibration, electromagnetic interference, no dust, Non-explosive and corrosive gases, good heat dissipation 16.Dimensions and weight : l*w*h=1180*750*750mm, 105kg
These gauges are for the control of interchangeability and safety of lamp caps and holders.
It is used for checking tensile strength of the central heart of lift cables.A sample of the completed cable, 1 m long, shall be weighted. After removal of all covering and cores over a distance of about 0.20 m at both ends of the sample, the central heart including the strain-bearing centre shall be subjected to a tensile force, corresponding to the mass of 300 m of cable. The force shall be applied for 1 min. Parameters(mm): Maximum test force 2000N Test force display range 0~500kg Grading test force No grading of the whole process, the entire resolution unchanged Test force measurement accuracy Is superior to ±1% of the display value Displacement resolution 0.01mm Accuracy of displacement measurement Is superior to ±1% of the display value Moving speed range of cross beam 25mm/min~500mm/min Stepless speed regulation, can set speed arbitrarily The control precision of the displacement speed Is superior to ±1% of the display value Tensile space 0~1000mm Dimension 500mm×500mm×1600mm, weight:100kg Power supply 220V?50Hz?1000W
It is used for the testing of IPX7, it also provide water and electrical automatic control for IPX1~6` waterproofing test. Parameters: 1. Suitable for IPX1-6 water proof and UL dripping water?IPX7 water immersion test and automatic control of the whole waterproof test system; 2. Water supply method: constant temperature water supply, constant flow water supply, constant pressure water supply. 3. Water supply control process: After user preset the water flow value and water pressure value on the touch screen, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter. 4. There are large flow and small flow two ways water supply. 5. Large flow water supply: (a) It is applicable to IPX5~IPX6 strong water spray test and water injection of IPX8 (b) Flow range: 10~100L/min (c) Flow accuracy: ±0.5L/min (d) Flowmeter: Turbine flowmeter (e) Water pump: Stainless steel centrifugal pump 6. Small flow water supply: (a)It is applicable to IPX1,IPX2,IPX3,IPX4 and UL waterproof test (b)Flow range: 1~10L/min (c)Flow accuracy: ±0.5L/min Flowmeter: Turbine flowmeter (d)Water pump: Stainless steel centrifugal pump (e)Pressure range: 0.1-3Kg/cm²; (f)Pressure digital display: Adopt digital pressure gauge; 7. Water storage tank: (a)It is applicable to water storage of IPX5~IPX6 strong water spray test,water injection of IPX8, IPX7 immersion (b)Volume: 500L (c)Dimension: L600mmXW660mmXH1400mm (d)Observation window: toughened glass window (e)Observation window dimension: W200mmXH1250mm (f)Depth gauge: stainless steel (g)Depth gauge height: 1300mm, accuracy 1mm (h)Liquid level control: float switch + overflow pipe 8. Control Cabinet: (a)Flow detection: flow signal feedback through electronic flowmeter (b)Flow setting: set on touch screen (c)Temperature detection: PID (d)Controller: Mitsubishi PLC (e)Friendly interface: 7 inch, color touch screen (f)Control function: constant flow water supply, constant pressure water supply,vertical drop rain motion control, oscillating tube rain motion control, rotation table motion control and test time control. (g)Protection function: leakage protection, overload protection, short circuit protection. 9. Water supply pipeline: water supply of this equipment using PVC hose, it is assigned to each device according to the site layout , and controlled by the electromagnetic water valve. 10. Install the drainage valve on the water supply pipeline, it will automatic discharge the water after the test is completed 11. Filter: stainless steel shell, fine filter element. 12. Machine body material: aluminum alloy profile. 13. Appearance size(WXDXH):1400X750X1600mm;
?equipment model and name Csl-y impact specimen gap hydraulic broaching machine ? equipment usage Impact specimen notch broaching machine is the dedicated and affiliated equipment with metallic pendulum impact testing machine, the machine adopts hydraulic drive, electric control the rise and fall of broach, broach lifting speed can be adjusted, adopting the lubricating oil to lubricate blade mouth parts at the same time, to ensure the sample accords with a requirement gap size and surface finish.The machine due to the use of a forming principle, the machining gap of good identity. Broach manufactured high-quality high-speed w18cr4v steel alloy, and its high hardness, good wear resistance, long service life, per knife can be processed more than 20000 samples. ? applicable standard Gb/t229-2007« metal material charpy pendulum impact test method»; Astm e23-02a«metal material gap specimen standard impact test method»; Iso148-2008«metallic materials-charpy pendulum impact test»; Din 50 115-1991«metal material impact test special sample size and fracture judge» Iv main technical parameters Sample notch type U type(u2, u3, u5), v type(v2) Processing sample size 10×10(7.5 or 5)×55mm Broach hardness =hrc65 Installed broach quantity 2 Cutting speed 2.5m/min ( can adjust) System pressure 2.5mpa Hysraulic oil storage 25l Broach stroke 340mm(u2, v2), 390mm(u5) Broach materials W18cv4v Motor power 370w Dimensions 480mm×660mm×1200mm (l×w×h) Weight 200kg V standard configuration 1.Host one 2.V2 broach one 3.U2 broach one Vi optional accessories 1. U3 broach 2. U5 broach
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
Easy-to-read Custom Dual-level LCD •On-the-spot measurement •Automatic Temperature Compensation •Tactile grip casings It uses combined pH electrode of high sensitivity, fast response, and good repetition as probe. With large liquid crystal digits display, the meter is reliable, stable, portable, and convenient to operate, especially for field measuring. It is praised by home and aboard. This product has been exported in batches. It is applicable to determine pH value of water solution in departments of medical treatment, environment protection, scientific research, college, swimming pool and mechanical plant etc.
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F). Benefits - Conforms to ASTM D92 and related specifications - For flash points above 79 C (175F) Function characteristics 1,english operating software prompts; 2, with the experimental date, test time parameter prompts; 3, automatic correction of atmospheric pressure and calculated correction values; 4 differential detection, automatic correction system deviation; 5, scan, ignition, detection, print test data computer is done automatically; 6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel; standard wooden case
Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of ul94, iec60695-11-2, iec60695-11-3, iec60695-11-4, iec60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. 1250mm*650mm*300mm, 160kg
It is suitable for all types of portable lamps and similar electrical appliances products for mechanical stability test, the test sample is placed on countertops, to assess its mechanical stability through different tilt angles. Working condition: Environment:0¡æ¡«+40¡æ;Working power supply:220V¡¨¤10%,50Hz Technical index: 1.Tilt angle:0-30¡ãstepless adjustable,electric control,encoders intelligent digital display; equipped with angle measuring instrument calibration, easy to operate, high accuracy angle,precision ¡¨¤ 0.5 ¡ã. 2.The maximum weight load:50kg,(load can be improved as per customer requirements)steel plate surface is treated by painting; 3.Motor speed: 0.50r/min (frequency control for optional),there are reliable earthing contact and power plug connector on the test bench of accessible metal surface; 4.Table diameter:800mm; 5.The test bench with stable whole structure,and beautiful appearance. Table diameter:800mm
The plugs are subjected to a compression test at the apparatus, the temperature of the pressure plate, of the base and of the specimens being (23 2) c and the force applied being 300 n. Plywood 60kg 400mmx300mmx600mm
Accuracy ¡¨¤¡ê¡§0.1%+50ms¡ê Memory group/test step 50sets/40steps 290mm*100mm*415mm 14kg
sion test of gb18285-2005 & hj/t289-2006. Chinese or english menu for easy operation Lcd screen Automatic zero resetting High-brightness digital display, automatic linear data process Automatic calculation and display of air-fuel ratio |Ë Equipped with rotation speed and oil temperature measure ports 460mm*240mm*230mm Net weight: 8.5kg Package dimension: Carton:595mm*310mm*345mm
Genenal information Ac/dc hipot testing is the effective and direct way to test insulation strength for electric equipments.It check dangerous flaws and make sure electric equipment continuous working.It typically used to test insulation strength for all kinds of electrical equipments, components like capacitors, insulation materials.Our hipot tester also used for ac, dc, ac/dc hipot testing. Wooden case
