Find Verified Electric Switches Isolators Suppliers, Manufacturers and Wholesalers

Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
â?? Application
Metropolitan Area Network
R&D in Laboratory
System Monitoring
Configurable OADM
Performance
Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650
Insertion Loss dB Typ:1.0,Max:1.2 Typ:0.8,Max:1.0
Return Loss dB â?¥30 â?¥50
Crosstalk dB â?¥35 â?¥50
PDL dB â?¤0.05
WDL dB â?¤0.25
TDL dB â?¤0.45
Repeatability dB �±0.02
Power supply v 3.0 or 5.0
Lifetime Cycle â?¥107
Switch Time ms â?¤8
Transmission Power mW â?¤500
Operation Temperature â?? -30ï½?+85
Storage Temperature â?? -40ï½?+85
Weight g 16
Dimension mm (L)55(W)30(H)12.8(±0.2)

The 1x1 and 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1x1,1x2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.
The switch also has build-in circulator and isolator functions. Electronic driver is available for this series
Performance
Parameters

SOSW-12
Wavelength Range
nm
1295~1325,1520~1580
Testing Wavelength
nm
1310/1550
Insertion Loss
dB
Typ:0.7 ,Max:1.0
Return Loss
dB
â?¥50
Crosstalk
dB
â?¥45
PDL
dB
â?¤0.10
Polarization Mode Dispersion
ps
â?¤0.20
TDL
dB
â?¤0.25
Optical Power Handling
mw
300
Switch Speed (rise, fall)
us
50~200
Repetition Rate
Hz
2K
Operation Temperature
â??
-40ï½?+85
Storage Temperature
â??
-40ï½?+85
Dimension
mm
(L)58.2(W)8.4(H)8.4(±0.2)

The OSW-2X2 Mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configuration s and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all OSW-2X2 Mechanical optic switch features low insertion loss,high extinction ratio,high channel isolation,and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure,longevity,operation under shock/vibration environment and large temperature variations,and fast response time.The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.

Features

Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching

Features

Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching

Application

1. Optical Signal Switching and Routing
2. Optical Network Protection and Restoration
3. Optical Network Monitoring
4. Video Distribution
5. Instrumentation Resource Sharing
6. Military Communications

Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
Application

Optical Signal Switching and Routing
Optical Network Protection and Restoration
Optical Network Monitoring
Video Distribution
Instrumentation Resource Sharing
Military Communications

Features
Low insertion loss
Wide wavelength range
Low crosstalk
High stability, high reliability
Epoxy-free on optical path
Latching and non-latching
Application

Optical signal switching and routing
Optical network protection and restoration
Optical network monitoring
Video distribution
Instrumentation resource sharing
Military communications

-

The 8x8 all-optical network switch module is a compact, high-performance and ultra-low power fully non-blocking all-optical 8 port â??any-to-anyâ?� matrix switch module. This unique customer configurable single-sided switch design allows any of the 8 ports to be connected to any other ports enabling new interconnection architectures not possible with traditional symmetric nxn switch matrixes. The ultracompact size and low-power usage make this an ideal choice for oem applications and enables the switch to be mounted onto pluggable circuit packs. It is designed to meet the highest performance and reliability needs of the most demanding applications with exceptionally low optical loss, compact size, low power requirements and fast switching speeds.


Â??features
Ï�¬low insertion loss

Ï�¬wide wavelength range

Ï�¬low crosstalk

Ï�¬high stability, high reliability

Ï�¬epoxy-free on optical path

Ï�¬latching and non-latching


Â?? application
Ï�¬metropolitan area network

Ï�¬r&d in laboratory

Ï�¬system monitoring

Ï�¬configurable oadm



Â?? performance

Parameters Osw-8ã?8

Wavelength range Nm 650ï½?1310 1260ï½?1670
Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650
Insertion loss Db Typ:2.0, max:2.8 Typ:2.0 , max:2.5
Return loss Db Â?¥30 Â?¥50
Crosstalk Db Â?¥35 Â?¥55
Pdl Db Â?¤0.05
Wdl Db Â?¤0.25

Tdl Db Â?¤0.25
Repeatability Db Â?¤â±0.02

Power supply V 3.0 or 5.0
Type Latching Or non-latching
Lifetime Cycle Â?¥107
Switch time Ms Â?¤15
Transmission power Mw Â?¤500

Operation temperature Â?? -20ï½?+85
Storage temperature Â?? -40ï½?+85

Dimension Mm (l)184ã?(w)184ã?(h)38

-

Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
Application

Optical Signal Switching and Routing
Optical Network Protection and Restoration
Optical Network Monitoring
Video Distribution
Instrumentation Resource Sharing
Military Communications

1x2 solid-state fiber optical switch
The 1x2 solid state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configuration s and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate 1x2 fiber optic switch features low insertion loss,high extinction ratio,high channel isolation,and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure,longevity,operation under shock/vibration environment and large temperature variations,and fast response time.The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.

Features

Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching

Application
Optical Signal Switching and Routing
Optical Network Protection and Restoration
Optical Network Monitoring
Video Distribution
Instrumentation Resource Sharing
Military Communications

Features

Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching

lectrical Driving Information
The switch is actuated by applying a voltage pulse. Applying one polarity pulse, one light path will be connected and latched to the position. Applying a reversed polarity pulse, another light path will be connected and latched to the position after pulse removed.

1.Work Humidiy:

SN501NB HDMI Amplifier Switcher routes high definition video (in multiple resolutions up to 4K*2k) and digital audio from any one of the 5 sources to display units.Input / output 10m @3840X2160 HDMI extend .

r

SN301NB HDMI Amplifier Switcher routes high definition video (in multiple resolutions up to 4K*2k) and digital audio from any one of the 3 sources to display units.
Input / output 10m @3840X2160 HDMI extend ;3 HDMI ports MHL function;Charging out function

The 4x1 HDMI Switcher 1.4V with ARC, HEC, 3D and High Fidelity function can connect multi HD Sources with one HD display end. It can switch any one of the four HD Sources to one HD Display or HD Projector very easily. Also the signal can support extra audio out by the optical cable. Without adding one extra HDMI Cable, it can reverse the audio to the AV Amplifier by HDMI Cable connection with HD TV while the HD TV receives the audio and video content. It allows the other HDMI Devices based the Ethernet and other HDMI devices enjoy the Ethernet function, so that you do not need to add one extra Ethernet cable
Input: 4 HDMI A-Type Output: 1 HDMI A-Type
Support: CEC 1080P
Support 3D
Product description: HDMI 4x1 Switcher V1.4 Support 4K UHD 3D-|-SN401AV14

The 4x1 HDMI Switcher supports PIP,4K and 3D can do connect four HD Sources to one HD Display. It can easily switch any one of the input four HD Sources to one HD display. It supports PIP function, and it can do switch or choose the input sources by checking the small picture window from the PIP.
Input: 4 HDMI A-Type Output: 1 HDMI A-Type+1SPDIF+L/R
Support: CEC 4K*2K 3D
Support HDMI1.4b

This is a high performance three HDMI input and one HDMI output switcher . The system supports all 3D TV formats in addition to all HDTV formats up to 4Kx2K. Furthermore, the remote control gives uses to complete control over the selection of sources and makes the device incredibly user friendly.

The 3x1 HDMI Switcher allows access to multiple HDMI sources, using a single HDMI sink. The Switcher allows three HDMI devices to be switched easily through one HDMI compatible monitor or projector. The Switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
Inputs: 3 HDMI Outputs: 1 HDMI
Support: 3D CEC HDCP 1.2
Dimension: 115X61X26 (mm)

This is one device of HDMI 2 ports bi-direction manual switcher. It can easily switch two routes of HD Source to any one HD display or projector. Also it can distribute one HD Source to two HD Display or projector.
Input: 1or 2 HDMI A-Type Output: 2 or 1 HDMI A-Type
Support: CEC 1080P
Support 3D
Product description: 2 HDMI-Host (DVD Player or PS3) to 1 HDMI Monitor or TV 1 HDMI-Host (DVD Player or PS3) to 2 HDMI Monitor or TV

1.WORK HUMIDIY:<95% ;
2.Base material pressure:1500VDC;
3.Operating Temperature:-40~30 ;
4.Working voltage:;¡§150VDC ;
5.Operating current:;¡§1100MA;
6.Line wide:;Y0.3mm;
7.The caudal mayfold:;¡§1180e.






packing with paper box

Application:KSD301 series thermostat applications ? sterilizer, ? dishwasher, ? dryer, ? microwave, ? drinking fountains, ? electric kettle, ? office equipment, ? coffee maker, ? sandwich toaster, ? car seat heaters, automobile antifreeze, electric cooker, refrigerator, air conditioner, laminator and other electric appliances.
The Product Sells Point:
Key Specifications/Special Features:
KSD301 series thermostat technical parameters
? electrical parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load)
2) UL AC125V 50Hz 15A (resistive load)
? operating temperature range: 0-300 ? (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ?
? reply and action temperature difference: 8 ~ 100 ? (optional)
? Connection: plug terminals 250 # (bend 0 ~ 90 ° optional); plug terminals 187 # (bend 0 ~ 90 ° optional thickness 0.5,0.8mm optional)
? life: = 100,000 times
? electrical strength: AC 50Hz 1800V lasted 1min, no flicker, no breakdown
? contact resistance: =50mO
? Insulation resistance: =100MO
? Contact form: Normally closed type: temperature rise, contacts open, the temperature drops, contact connected;
Normally open type: temperature rise, contact connected, the temperature drops, the contact is open
? shell protection grade: IP00
Installation: KSD301 Series Installation ordinary activities ring, ring install small round activities, installation of flat panel active ring, ordinary large aluminum cover with mounting holes, with mounting holes lengthened aluminum cover.

KSD301 series thermostat competitive advantage
? stable performance
? high precision
? small size, light weight
? high reliability, long life
? dry worries small radio
? no arc

KSD301 series thermostat Notice
? grounding: The thermostat metal cover metal parts connected to the equipment grounding.
? when using contact temperature installation should be charged with snapping the metal to cover up the installation of surface equipment, to ensure that the temperature effect, should be coated with thermal grease or other properties like heat transfer medium in surface temperature.
? not install when the top cover surface collapsed, loose or deformed, so as not to affect performance.
? not allow liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals.
? product in less than 5A current of the circuit used, should be selected cross-section of 0.5 5-1?2 copper wires; not more than 10A current in the circuit, chose the copper wires cross-section 0.75-1.5?2 .
? product should be less than 90% relative humidity, ambient temperature below 40 ? ventilated, clean, dry, non-corrosive gases stored in the warehouse.
? use can not bend the terminals, otherwise it will affect the reliability of the electrical connections.