The 149-10A is a digital voltmeter that can measure high voltages up to a10kV AC and DC at high accuracy. Its high input impedance (1000M ohm) make it suitable for measurement of high impedance voltage circuits. Since it has a high accuracy despite its small size and light weight, it can also be easily used as a portable calibrator.
This electrical energy meter (kWh) phase DIN rail is a new generation of single-phase electronic energy meters, using techniques microelectronic circuits high integration (LSI), digital techniques and advanced techniques CMS. The meter meets the technical requirements of class 1, class 2 and IEC62052-11, IEC62053-21. It is used to measure active energy consumption accurately and directly from the ac phase (50/60 Hz).
M-4673 mini digital leakage current clamp meter features high reliability, safety, precision and compact design with 1mA resolution. AC/DC Current range of 100A; particular VFC start mode. Entering this mode can accurately measure voltage and current which has VFC frequency conversion. Voltage or current response display is T-RMS. Whole range overload protection, reliable measurement accuracy and unique design makes it an outstanding new generation electrician/electric power measurement instrument.
Clamp on AC current measurement up to 200 A. The CMP-200 digital clamp meter is designed for clamp measurements of AC leakage current. Clamp on AC Current CMP-200 Features high resolution (0,1 mA), three measuring ranges: 200 mA, 2 A, 200 A. display LCD 3�½ digit (max 1999), white LED backlight, sinternal diameter clamp approx. 30 mm (1,2â?³), DATA HOLD function, for holding measured values. MAX function, AUTO-OFF function, double molded casing. Available on back-order
sic element is a kind of non-metal high temperature electric celement. It is made of selected super quality green silicon carbide as main material, which is made into blank,silicided under high temperature and re-crystallized. Compared with metal electric heating element ,this kind of element is characterized by high-applied temperature, anti-oxidization, anti-corrosion, long service life ,little deformation ,easy installation and maintenance. Therefore, it is widely used in varilus high temperature electric furnaces and other electric heating devices ,such as in the industries of magnet, ceramics ,powder metallurgy, glass ,metallurgy and machinery,etc
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30�ºC~160�ºC Turbidity 10000ppm and small bubble content Flow rate 0~�±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
Product overview Hand-held ultrasonic flow meters enable non-contact measurement of liquid flow. The flow is measured by mounting the sensor on the outer wall of the pipe. It has the characteristics of small size, convenient carrying and accurate measurement. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production monitoring, flow verification, flow inspection, water balance adjustment, energy saving monitoring, and is an essential tool for real-time flow detection. Technical parameters Category Performance, parameters Host Principle Ultrasonic time difference principle Accuracy ±1% Display 48 Chinese or 416 Western-style dot matrix backlit LCD monitors, supporting Chinese, English, Italian and French. Signal output 1 channel OTC pulse output (pulse width 6~1000ms, default 200ms) Data interface The RS232 serial interface is isolated and the flowmeter can be upgraded via a PC. Pipe condition Pipe material All dense pipes such as steel, stainless steel, cast iron, copper, PVC, aluminum, and glass reinforced plastic are allowed to be lined. Pipe inner diameter 15~6000mm Straight pipe The sensor installation point is best to meet: upstream 10D, downstream 5D, Distance to pump outlet30D (D is the pipe diameter) Measuring medium Kind Water, sea water, industrial sewage, acid and alkali, alcohol, beer, various oils and other single average liquids that can conduct ultrasonic waves. Temperature -30C~160C Turbidity 10000ppm and small bubble content Flow rate 0~±10m/s Working environment Temperature Host:-20C~60C Flow Sensors:-30C~160C Humidity Host:85%RH Sensor protection level IP67 Power supply Three built-in 1.2V rechargeable NI-MH batteries with a capacity of 2000AH, which can work continuously for more than 12 hours every time. Different measurement can be achieved by using the AC90~260V power adapter. Power consumption 1W Shell material Flame retardant ABS Host weight 390g
PUTF201 clamp-on transit-time ultrasonic flow meter utilizes transit-time principle.The transducer is mounted outside surface of the pipe without requirements of flow stop or pipe cutting.It is very simple,convenient for installation,calibration and maintenance. Small,media,large three pairs of transducers meet different size pipeline measurement demand.Plus,select thermal energy measuring function to achieve completely energy analysis.Widely applied for processing monitoring water balance test district heating balance test energy efficiency monitoring as easy installation and simple operation advantages.
We hope that everybody is safe in COVID-19 Quick Details: Place of Origin: America Brand Name: ABB Model Number: 3BSC610D65R1 Condition: New Lead Time: In Stock Shipping Port: Xiamen Payment: T/T Sales Price: Inquiry Color: Depends on material Warranty: 12 months Lead time: 3 working days Terms of payment: T/T and Western Union Courier partners: DHL, UPS, TNT, FedEx and EMS Company information: Huge Technology Automation Co.,Ltd. The supplier for industrial automation spare parts. Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you. Main Product: ABB ABB Bailey GE FANUC HONEYWELL Bently Nevada INVENSYS TRICONEX EMERSON EPRO WOODWARD SCHNEIDER INVENSYS FOXBORO Contact Information: Our Email: sales11@htechplc.com Our Skype: +8618060983634 Our Whatsapp: +8618060983634 TLE: +8618060983634 We have the best price!!! Please contact me if you have any questions!!! We hope that everybody is safe in COVID-19
Product Profile NHG268 gloss meter is a high-end precise tri-angle smart gloss meter for surface glossiness measurement and management, which can be widely applied in all kinds of industries, such as plastics, metals, paint and coating, furniture, wood, ink, printing and packaging, cosmetics, fabrics, textiles and garments, electronics, tiles and decoration industry. In one word, NHG268 tri-angle gloss meter can be perfectly applied in any place that requires gloss measurement and control. Quick Details Place of Origin: Guangdong, China Brand Name: 3nh/ThreeNH Model Number: NHG268 Power: Electronic Product Category: Gloss Measuring Instrument Product Name: Gloss Meter Measurement Angle: 20�° + 60�° + 85�° Measurement Range: 0 - 2000GU Division Value: 0.1GU Measurement Mode: Basic, Statistical, Continuous Operation: by Screen-touch Data Port: USB PC Software: GQC6 Equivalent Model: BYK 4563
DTSY1088 single phase integrated type keypad meter measures total active energy. It is STS certified and complies with the standards of IEC62052, IEC62053, IEC62055, IEC62056 etc . The Measurement and Control Unit (MCU) is BS standard complied and can be installed into meter box to prevent unauthorized operation. FEATURES 1.Easily configurable Prepaid & Postpaid mode . 2.Reverse energy measured in forward. 3.Easily configurable user friendly kWh. 4.Configurable LCD displaying items 5.Programming reading by optical 6.Communications between MCU and MSDS is 4G/3G/GPRS (MCU to DCU is RF/PLC ) 7.Real time measures voltage, current, frequency, active power, etc. 8.Events record with time stamp. 9.Open Protocol: DLMS/COSEM 10.Plug&Play Communication modules(RF/PLC/4G/3G/GPRS optional ) 11.Advanced AMI/AMR integration
Standards 1, IEC62052-11:2003 2, IEC62053-21:2003 Features 1.Measurment: Measure total active energy and tariffs. 2.Meaure total active max demand and four tariffs total active max demand. 3.multi-tariff function. 4.Record previous 12 months data.
DESCRIPTION The DDSY1088 single phase two wire postpaid meter is made of high quality optimized long life components and designed in advanced SMT technique with good performances on reliability, accuracy and load ranges.DDSY1088 provides metering solution benefiting both consumers and power utilities. It complies with the applicable standards of IEC1036, IEC62052-11, IEC62053-21. FEATURES 1. High accuracy measurement with LCD display,5 integers. 2. Wide operating voltage range 0.8Un ~ 1.15Un. 3. Long time precisely works without calibration and limit error linear maintains flat during heavy loading from start to end. 4. With active impulse LED indicator and reverse energy LED indicator 5. With cover of terminal block made by transparent material. 6. Measures active energy,reactive energy and reverse always add to positive. 7. Meter base and cover ultrasonic sealed 8. The communication between meter and CIU is PLC
DESCRIPTION The single phase two wire electronic meter is made of high quality optimized long life components and designed in advanced SMT technique with good performances on reliability, accuracy and load ranges. featured with source-load missing neutral anti-tamper function, and provides metering solution benefiting both consumers and power utilities. It complies with the applicable standards of IEC1036, IEC62052-11, IEC62053-21. FEATURES 1. LCD display with backlight function even if power failure. 2.Wide operating voltage range0.7Un ~ 1.15Un, withstand 1 hour limit operating voltage up to 380V. 3.The meter can works under harsh environment conditions of kind of variations by high accuracy in a long time 4.without calibration, and its limit error linear maintains flat even during heavy loading status from start to end. 5.Useful infrared communication for meter reading and setting. 6.With active impulse LED indicator and impulse test output. Anti-Tamper function. 7.Measures voltage and current with LCD display. 8.Maximum demand.
DESCRIPTION Adopting large scale IC and SMT processes,the DTSD1088 DLMS meter is made to accurately total active/reactive energy,forward and reverse active/reative energy and maximum demand.And in real-time it also measures and takes in process parameters like active/reactive power,apparent power,Voltage,current,power factor,frequency and so on,and implements time-of-use control,automatic stroge of reading-day demand,and records load profile and events.And with infrared,RS485,PLC communications equipped,the DTSD1088 DLMS meter is an ideal device to realize time-of use energy measurement and efficient processing in ease.It complies with applicable standards of IEC62052-11,IEC62053-21,IEC62053-61,IEC62054-21,IEC62056-61,IEC62059-11,IEC62059-21. FEATURES 1. Energy measurement (separate and total):Forward and reverse,active,four-quadrant,time-of use,sub-phase. 2. Demand record 3. Real-time parameters 4. Data archive 5. Data freezing 6. Events record 7. Optional infrared,PLC,M-BUS,Ethernet,GPRS communication
DESCRIPTION Hexcell single-phase PLC meter based on digital media information exchange medium, it features include active measurement, high precision clock, load switch control, moreover can also reading data from the PLC, the near infrared, RS485 and set parameters FUNCTIONS 1.Rmeasure active power forward and reverse respectively, measuring the total active power (forward and reverse) 2.Event log including: power, open front cover, open terminal cover, reverse, magnetic field, the unbalanced load, over voltage, low voltage, programming records, time corrected record and remote pull switch, etc. 3.Tariffs: 4 tariffs, Monday to Sunday 7 ordinary day time, 16 holiday period, 16 special holiday time, can be divided into eight period one day. 4.Contains hours freezing (24 hours), froze1.n (62 days) and freeze power in previous 12 months 5.Remote switching function 6.Load profile: load profile for 30 minuters, frozen data (time + live wire power + null wire power load profile)
DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Customized meter design for Finland Utility. 2.Special terminal block connection for easy wiring. 3.Terminal cover &front cover with detecting features. 4.With backup battery for RTC. 5.Load Profile(Optional) 6.MD measurement 7.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 8.With optical communication port(IEC1107) 9.Open protocol: DLMS/COSEM(Optional)
DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. With infrared, RS485, PLC and GPRS communication equipped, DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Functional LCD displays(menu driven, scrolling function, IR remote control mode) 2.Events record: Power-on/power-off (latest ten time), power quality monitoring(10 times), meter cover open(10 times recorded and can be read by MDM software). 3.Load curve recording: Active/reactive energy, voltage(3 phases), current(3 phases), power factor(3 phases) and time stamp(DD/MM/HH/YY) 4.External relay 5.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 6.RTC, broadcast time synchronization via communication interface(could be set by GPS time via the MDM) 7.Optional multi-communication: PLC based on OFDM according to CENELEC standards(A-band), GPRS(SIMCOM-chip), RS485, integrated M-Bus(extended connection to gas and water meters) according to OMS standard. 8.Open Protocol: DLMS/COSEM 9.Advanced AMI integration (Optional)
DESCRIPTION The DDS1088 single phase two wire electronic meter is made of high quality optimized long life components and designed in advanced SMT technique with good performances on reliability, accuracy and load ranges.DDS1088provides metering solution benefiting both consumers and power utilities. It complies with theapplicable standards of IEC1036, IEC62052-11, IEC62053-21. FEATURES High Accuracy measurement with cyclometric register display, 5 digits. Wide operating voltage range 0.8Un ~ 1.15Un. Long time precisely works without calibration and limit error linear maintains flat during heavy loading from start to end. With active impulse LED indicator and reverse energy LED indicator With cover of terminal block made by transparent material. Measures active energy and reverse always add to positive. Meter Base and Cover ultrasonic Sealed
Description The ddsy1088 single phase keypad energy meter measures total active energy.It is STS certified. and complies with the standards of IEC62052-11, IEC62053-21, IEC62055-41 &IEC62056-21.BS standard complied. It can be inserted the plug-in communication module to achive the AMR/AMI solution.And with built-in relay,it can be remote control. Function 1.Easily configurable Prepaid & Postpaid mode by token 2. Anti-tamper 3. Load profile 4. Exchangeable, optional communication module:GPRS/3/4G/PLC/GSM/Ethernet 5.Real time measures voltage, current, frequency, active power, etc 6.Open Protocol: DLMS/COSEM 7.Programable multi-tarrif
