Basic Info. Model NO. PST100-12 Origin China HS Code 8507200000 Production Capacity 600pieces/Day 12V 100Ah GEL Solar battery (PST100-12) Valve regulated lead acid series ups batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System.
Product Description gel accumulator 2v 800ah (OPzV800-2) OPZV800-2 Opzv Series Valve Regulated Lead Acid batteries are designed with a proven combination of GEL and Tubular technologies to offer a very high level of reliability. Opzv batteries benefit from an optimized plate design which gives capacities in excess of the DIN standard values. In addition, this series offers both a longest float life and a high cycle life in widely industrial field. Safety and Sealed No electrolyte leakage will occur from terminals or case or case of any Storace Battery ensuring safe and efficient operation. Maintenance-Free operation There is no need to add water thanks to unique gas recombination system which totally transforms the generated gas into water. Storace batteries do not need the equalizing charge As a result of monomer battery's interface resistance capacity and float voltage uniformity are fine. No Free Acid The special electrolyte retentive separators bold the acid and thus there is no free acid inside the battery, and therefore the battery can be mounted in any position. Long life Design The use of heavy -duty lead-calcium alloy grids with anti-corrosive construction enables the Storace AGM battery to remain in float service for 10-15 years; the GEL battery to remain in float service for 15-20 years. The cycle life can be more than 1000 cycles High Reliability and stable quality With advancing AGM and GEL production technology and strictly quality control system, the battery quality is stable and the battery performance is reliable. The voltage, capacity and seal are 100% tested on line. Self-discharge The self-discharge rate in room temperature is approximately 2% of nominal Capacity per month. Operating temperature TheStorace Battery can be operated between -40�°C to +65�°C.The battery can give out over40% fo nominal capacity at -40�°C.
Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on. Basic Info. Model NO. : PST FT100-12 Installation : Packaged Rechargeable ; Chargeable Province : Guangdong Maintenance Type : Free Sealed Type : Sealed Weight : 34.5 Size : 560*125*228*228 Transport Package : Carton Trademark : Pustun Origin : China Production Capacity : 2000
The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 1.Environmental protection and pollution-free: the whole module using materials are non-toxic, pollution-free; 2.long safety life: the core cathode material of battery module is made of LiFeOP4, good safety performance and long service life; 3.Protection function: battery management system can protect battery module over discharge, over charge, over current and high / low temperature; 4.Equilibrium function: the battery management system has its own passive equalization, can balance the battery module each single string core; 5.Expansion: flexible configuration, multiple battery modules can be parallel expansion capacity, applicable to different standby time requirements; 6.Low power consumption: the battery has the function of automatic dormancy, when no live equipment is connected, it can enter the low power state by itself and reduce the self-loss; 7.No memory: no memory effect, shallow charge and discharge performance is excellent; 8.Wide temperature range: working temperature range-20~70, charge 0~60, discharge-20~70, good discharge performance and cycle life, Built in BMS overall protection 1.Over charged protection 2.Over discharged protection 3.Thermal protection 4.Over current protection 5.Cell balancing
Basic Info. Model NO. PST200-12 Installation Packaged Rechargeable Chargeable Size 522*239*2180mm Weight 60kg Color Black / Dark Gray Cell 3 Sealing Glue Sealing Separator AGM Flat Plate Plate Battery Case ABS Terminal Lead Safety Explosion-Proof Transport Package Carton, Then Pallet Specification CE/ FCC Trademark Pustun Origin China HS Code 8507200000 Production Capacity 2000 PCS/Day Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on.
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.
At the core of our lithium battery systems lies a relentless focus on safety. All of the batteries undergo rigorous testing, including nail penetration, overcharge, and short circuit scenarios, ensuring the utmost reliability. And the Battery Management System (BMS) continuously monitors critical parameters to provide multi-layered protection, giving our customers complete peace of mind.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Dm72c wifi co2 meter.
Pure sine wave off grid inverter, energy storage lithium battery, solar charge controller, ac/dc battery charger and single phase to 3 phase converter, pv combiner box and power supply.
Power tools.
Electrophoresis power supply, electrophoresis cell, uv transilluminator, shaker.
Electric power, saving devices.
The DOF6000 series DOF6000-P Portable Open Channel Ultrasonic Flow Meter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor DOF6000-P Portable Open Channel Ultrasonic Flow Meter is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated. The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the riverâ??s shape of cross section. It is suitable for various applications.
Power supply 1) switching power supply output: Dc voltage/rated current:5v/12a and12v/5a or5v/6a and24v/4a 2) switching power supply input: Voltage range: 88 ~ 132vac selected by switch 248 ~ 370vdc Ac input frequency: 47 - 63hz Ac current: 2.5a/115vac 1.25a/230vac Inrush current (max.):cold start 18a/115vac 36a/230vac Leakage current:
DR-120-24 1.Low price and high reliability 2.105íµ output capacitor 3.AC input power suitable for the world 4.High efficiency and low operation temperature 5.Soft-start current can reduce the AC input impact effectively 6.With short-circuit and overload protection 7.Compact size, light weight 8.100% full-load burning test 9.Installed with EMI filter, minimum wave Model Specification DR-120-12 DR-120-24 DR-120-48 DC output voltage 12V 24V 48V Output voltage error (Note2) 2% 1% Rated output current 10A 5A 2.5A Output current rage 0-10A 0-5A 0-2.5A Wave and noise(Note3) 80mVp-p 80mVp-p 100mVp-p Inlet stability(Note4) í+0.5% í+0.5% í+0.5% Load stability (Note5) í+1% í+1% í+1% DC output power 120W 120W 120W Efficiency 80% 84% 85% Adjustable range for DC voltage 10.8-13.2V 21.6-26.4V 43.2-52.8V AC input voltage range 88í½132VAC/176-264 47í½63HZ;248í½370VDC Input current 3.3A/115V 2A/230V AC impulse current Cold-start current 30A/115V 60A/230V Leakage current
Product spec: Spt-1 18awg*2c(length=150cm) Spt-2 18awg*3c(length=180-210cm)