MAL-470 low pressure environmental-protection automatic spray gun for ultra large pattern width
Functions and features:
Special designs of the inner structure create the special automatic spray gun MAL-470 which is the ideal tool of cost saving with high atomization, ultra large pattern width, high transfer efficiency and paint saving.
MAL-470 is widely used in leather, plastics and so on.
Specification
Model: MAL-470-11P
Type of feed: Pressure
Fluid nozzle orifice: 1.1mm
Spray distance: 200mm
Spraying air pressure: 0.3 (3.0)MPa (kgf/cm2)
Air consumption: 400l/min
Fluid output: 270ml/min
Pattern width: 420mm
Weight: 500g
Model: MAL-470-14P
Type of feed: Pressure
Fluid nozzle orifice: 1.4mm
Spray distance: 200mm
Spraying air pressure: 0.3 (3.0)MPa (kgf/cm2)
Air consumption: 400l/min
Fluid output: 320ml/min
Pattern width: 480mm
Weight: 500g
BINGO has been doing nearly 10 years in the auto parts and home appliance metal stamping molds designing and manufacturing.The staffs here are well trained, experienced, happy, full of passion, responsible and hard-working, we are sure we can serve you well.
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy.
3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available.
4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate.
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.
Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency.
1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.
2.European design, multi group gears driving and be suitable for heavy cutting and stable precision.
3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available.
Model ï¼?ZG-375SAï¼?
Sawing angle 90° 45°
Cutting capacityï¼?mmï¼?
120 100
120Ã?120 105Ã?105
150Ã?60 110Ã?60
70 60
65Ã?65 55Ã?55
Machine motor 3HP
Spindle speed 58/29R.P.M
Cooling water pump 1/8HP
Saw blade HSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32ï¼?Pin hole2Ã?Ï?11Ã?63mm
The use of hydraulic pressure 25-35kg/cm²
Machine dimension Approximately 620kgs
NW/GWï¼?LÃ?WÃ?Hï¼? 1610Ã?780Ã?2130mm
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile.
1ã?? high precision sawing, no burr, no need for secondary processing, high efficiency.
2ã?? only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece.
3ã?? hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise.
4ã?? the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5ã?? press height and speed and saw cutting height and speed can be set according to material size and thickness.
6ã?? the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade
7ã?? additional Angle template can be cut Angle.
Model ZG-455SAL specifications
Sawing angle 90°&45°
Maximum sawing width 300mm
Maximum sawing height 140mm
Saw blade 3200R.P.M
Blade size Tungsten steel blade with blade tip
Ï?355-455Ã?Ï?25.4mm
Size of Table 650Ã?670Ã?860mm
Machine motor 5HP/2P three-phase
Pressure required 5-6kg/cm2
Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm
Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm
NW/GW 335/385kg
A ceramic knife is a knife designed with a ceramic blade typically made from zirconium dioxide (ZrO2; also known as zirconia).[1] These Utility knife blades are usually produced through the dry-pressing and firing of powdered zirconia using solid-state sintering. It is 8.5 on the Mohs scale of mineral hardness, compared to 4.5 for normal steel and 7.5 to 8 for hardened steel and 10 for diamond. sharpened by grinding the edges with a diamond-dust-coated grinding wheel.
When you need a company that can assist you all the way through design through production, we can help. We have the expertise to assist you and look forward to your inquiry.
Superior Stainless Steel Material ,High resilience and long life.
The cutting performance excellence, cutting edge smooth and clean, no edge tissue
Excellent Lawn Mower Blades quality including good sharpness, low noise, high reslience and long lifespan even working during raining.
FRONTIER Robotic Mower Blades works perfectly with Auto-Mower in the market.Excellent quality including good sharpness, low noise, high reslience and long lifespan even working during raining. Three pivoting razor blades will help your robotic mower to achieve an excellent cutting result
[Wide Application]The ideal cutting paper, fabric, leather, plastic, cloth, etc.For cutting at home, office, school, shop, especially the use of technology.
[Excellent Material]SK-7 imported blades, after 7 special processing made, compared with the average length of domestic cutting board six times longer.
[Powerful Function]Because the blade is made of stainless steel, it retains its sharp edge. Repeated cutting is not affected, leaving no trace after cutting 60mm rotary blade cuts up to six layers of fabric at a time.
CARVING BLADE
Wide usages: this Hobby Knife Blades can slice through paper, fabric, plastic, thin metal, cardboard, foil, wallpaper and more, a good helper for making models, art work
Material: hobby blade is made of aluminium, it is durable and delicate, the plated color is not easy to get fade, its blade is manganese steel material, providing you quality using experience
Design details: this High Quality Hobby Knife handle, with anti-slip texture on the surface, offer you comfortably to hold it and make the whole look gorgeous, each knife is equipped with a sturdy plastic cap for safe protection.
CARVING BLADE
Wide usages: this Hobby Knife Blades can slice through paper, fabric, plastic, thin metal, cardboard, foil, wallpaper and more, a good helper for making models, art work
Material: hobby blade is made of aluminium, it is durable and delicate, the plated color is not easy to get fade, its blade is manganese steel material, providing you quality using experience
Design details: this High Quality Hobby Knife handle, with anti-slip texture on the surface, offer you comfortably to hold it and make the whole look gorgeous, each knife is equipped with a sturdy plastic cap for safe protection.
It is suitable for testing the non-flammability of single plastic cable, control cable, cross-linking cable, elevator cable, marine cable and mine cable.
2. Standards
Comply with GB/T18380.11 - 2008, IEC60332-1-1 and IEC60332-1-2 standard requirements.
3. Performance parameters
(1) Combustion burner: 1 KW mixed combustion nozzle, blue flame height is 50~60 mm.
(2) The total height is 170~190 mm.
(3) Gas flow range: gas 100~1000 ml / min
(4) Combustion gas: purity of 95% propane gas or liquefied petroleum gas (customer self-supplied)
(5) Air flow range: 1~10 L / min
(6) Pressure gauge: 0 to 0.75 kpa range adjustment
(7) The length of the tested wire and cable is 600 ± 25 mm
(8) The outer diameter of the tested wires and cables is 1~30 mm
(9) This device is installed in an airless environment for testing.
(10) Ignition mode: high pressure automatic ignition.
(11) The fire time is 0.1 to 999.9 S, and the flame can be continuously adjusted at the set time.
(12) The switch can be operated manually or automatically according to actual needs.
Dimension L1200mm * W910mm * H2650mm
Volume > 2 m3
Metal shield width 300 ± 25 mm, depth 450 ± 25 mm, height 1200 ± 25 mm
Nozzle diameter 12.0 mm
nozzle outlet 7.0 mm
Power AC220V, 50HZ,1KW
It is used to evaluate the ability of vertically installed bundle wires or cables to suppress flame vertical spread under specified conditions. This equipment is widely used in wire and cable industry, colleges and universities and commodity inspection departments.
The experimental device is a self-supporting box with length of (1000±100) mm, width of (2000±100) mm and height of (4000±100) mm. The bottom of the box is above the ground. The circumference of the test box is sealed, and the air flows into the box from an inlet of (800±20) mm x (400±10) mm, Open a vent (300±30) mm x (1000±100) mm at the rear of the top of the box. Thermal insulation with heat transfer coefficient of 0.7Wm2K1 is adopted on the back wall and both sides of the test box. The distance between the steel ladder and the back wall of the test box is 150 mm, the lowest transverse gear of the steel ladder is (400±5) mm from the ground, and the lowest part of the cable sample is about 100 mm from the ground.
2. Standards
This bundle cable burning tester is manufactured in strict accordance with GB/T 18380.31-2008 and other standards.
(2) Air Source: The air inlet is equipped with a digital anemometer which can measure the air velocity. The air flow rate is (5000±500) L/min.
(3) Steel ladder type: wide (500±5) mm standard steel ladder, wide (800±10) mm wide steel ladder.
(4) The size of the air inlet at the bottom of the combustion chamber is (800±20) x (400±10) (mm).
(5) Ignition Source: two belt propane gas burner and its matching flowmeter and Venturi mixer. The fire surface should be a flat metal plate drilled with 242 holes of 1.32 mm in diameter. The holes are arranged in three rows with the center distance of 3.2 mm. Each row is 81, 80 and 81, respectively, and distributed in the nominal size of 257 x 4.5 mm. In addition, a small number of holes are arranged on both sides of the flamethrower, which can maintain stable combustion of the flame. Each burner uses a rotator to control the flow rate of propane and air.
(6) Ignition source position: Spray lamp is placed horizontally, away from the front surface of cable sample. The burning point of the spray lamp is located in the center between the two transverse gears of the steel ladder and is at least 500 mm from the lower end of the specimen. The spray lamp is installed on the trolley.
(7) Combustion Gas: propane with a purity of 95%. (user provided)
(8) Combustion Supporting Gas: compressed air.
(9) Air Flow: 20~150L/min adjustable, equipped with pressure gauge and regulating valve.
(10) Propane Flow Rate: 2~20L/min (flowmeter is rotator flowmeter); equipped with pressure gauge and regulating valve.
(11) Power Supply: AC380V, 50HZ; total power is 5KW.
186 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
