Cd-xoo series 4 digital temperature controller with following details. Feature 1. New algorithm using fuzzy logical pid control 2. Six alarm mode setting freely 3. Tc input, rtd input, voltage input, ampere input 4. Relay output, voltage output, ampere output Model and parameter 1.How to select the type Standard signal 0-5vdc input, 1-5vdc input 0-10madc input 4-20madc input Level input is 0-50dvc Rtd Pt100 (0-499.9íµ), gu50(0-99.9íµ) No need custom-made; freee Exchange the input way Tc K(0-600íµ), j(0-800íµ), t(0-400íµ R(0-1600íµ), s(0-1600íµ), b(0-1800íµ), e(0-1000íµ), n(0-1200íµ), l Need custom-mode 2.Technical parameters Measuring accuracy Less ía0.5%f.Síal dig Control mode On/off control, pid direct action, pid reverse action Control accuracy ía1ípc Control output Relay output, voltage output 0-10madc output, 4-20madc output Relay contact burden 3a/250vac Power 90-250vac 50hz/ 60hz Anti-interference Iec 3g Carton
1.Temperature controller adopts japans and italian (p.I.D) programmed sensor Internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. Cad system design that is easier to handle and maintain. Long;1100 Wide;600 High;600 Weight;110kg Packing; standard wooden case
1.Temperature controller adopts Japans and Italian (P.I.D) programmed sensor internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. CAD system design that is easier to handle and maintain. LONG;1100 WIDE;600 HIGH;600 WEIGHT;110KG PACKING; STANDARD WOODEN CASE
Cd-x08 series 3 digital temperature controller Feature 1. New algorithm using fuzzy logical pid control 2. Six alarm mode setting freely 3. Tc input, rtd input, voltage input, ampere input 4. Relay output, voltage output, ampere output 5. 3 digit led display Model and parameter 1.How to select input type Rtd Pt100(0-499.9ípc) No need custom-mode; free exchange the input way Tc K(0-600ípc) R(0-1600ípc), s(0-1600ípc)ú¼bú¿0-1800ípcú¬ú¼eú¿0-1000ípcú¬ú¼nú¿0-1200ípcú¬ú¼jú¿0-800ípcú¬ú¼tú¿0-400ípcú¬ Need custom-mode 2.Technical parameters Measuring accuracy Less ía0.5%f.Síal dig Control mode On/off control, pid direct action, pid reverse action Control accuracy ía1ípc Control output Relay output, voltage output 0-10madc output, 4-20madc output Relay contact burden 3a/250vac Power 90-250vac 60hz Anti-interference Iec 3g Carton
Passometer,Fitness Tracker,Sleep Tracker,Message Reminder,Call Reminder,Blood Pressure,Alarm Clock,Heart Rate Tracker,Activity Tracker,Thermometer Specification Model: Q8T Smart bracelet Screen Type:Color LCD Compatibility:All Compatible Waterproof Grade:Life Waterproof Case Material:Plastic Screen Style:Rectangle/Square-shape Band Detachable:Yes Band Material:Silica Style:Sport Touch Screen:No Function:Passometer,Fitness Tracker,Sleep Tracker,Message Reminder,Call Reminder,Blood Pressure,Alarm Clock,Heart Rate Tracker,Activity Tracker,Thermometer Language:English,Russian,Spanish,Polish,Portuguese,Turkish,Italian,French,German,Korean,Japanese
E the internal temperature effectively. 4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable. 5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a 6. Lcd display screen, capable of displaying the measured value as well as the set value and time. 7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity. 8. casters are provided for ease of mobility, with strong positioning screws. Vices: fuse free switch, overloading protection switch for compressor, high and Wooden case
Basic Info. Model NO.: KI31 Control Type: Digital Display Type: Blender Material: Plastic/ Ceramic Certification: CE/CQC/CB/UL/cUL/TUV Usage: Temperauter Control Type: Temperature Switch Max Voltage: 250V Max Current: 16A Body Material: Bakelite or Ceramic Temperature Characteristics: Normal Opened or Normal Colsed Terminal Angle: Horizontal or Vertical Terminal Type: 6.3mm or 4.8mm Export Markets: Global Additional Info. Trademark: HX Packing: Carton or According to Customers Requirements Standard: customized Origin: Dong Guan,Guang Dong ,China HS Code: 9032100000 Production Capacity: 3000000 PCS Per Month Product Description Technical parameters: Electrical parameters: 1)CQC, VDE, UL, cUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2. Action temperature range: -10~260Centigrade (Optional); Temperature accuracy: 10Centigrade 3. Recovery and action temperature difference: 8~100Centigrade (Optional) 4. Connection method: Insert the terminal 250# (bending angle: 0~90¡ã Optional); Insert the terminal 18(bending angle: 0~90¡ã Optional; Thickness: 0.5, 0.8mm optional) 5. Lifespan: ¡Ý 100, 000 times 6. Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7. Contact resistance: 50M 8. Insulation resistance: 100M Junction method: Constant-closed: The contact point disconnects when temperature rises; And contact point connects when temperature falls; Constant-opened: The contact point connects when temperature rises; And contact point disconnects when temperature falls. 10. Casing protective class: IP00 11. Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12. Installation method: Installed for KI031 series: General moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Office Equipment Snap-action Thermostat Applications of KSD301 Thermostat 1. Water dispenser, Electric heater, Sandwich toasters, Dishwashers, Dryers, Disinfection cabinet, Microwave ovens, Electric coffee pot, Electric caldron, Refrigerator, Air conditioning gluing machine 2. Office equipment 3. The seat heaters. 1. 250V15A thermostat 2.Plastic body or ceramics body 3.Normal close or normal open 4. VDE TUV UL CE Certificate
Detailed brass screw bimetal thermostat description fixation of the working temperaturing reliable snap action perdurable less radio interference Technical parameters: Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2.Action temperature range: 45~160 (Optional); temperature accuracy: 3.Recovery and action temperature difference: 8~100 (Optional) 4.Connection method: Insert the terminal 250# (bending angle: 0~90deg optional); Insert the terminal 187# (bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional) 5.Lifespan: over100,000 times 6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7.Contact resistance: less than 50m 8.Insulation resistance: less than100M Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls; Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls. 10.Casing protective class: IP00 11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Precautions: 1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection. 5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Y&D860 Precision Dispenser system can be widely used in electronics industry, viation, automobile, food, medicine, chemistry, cosmetic, packing, craftwork industry and etc. Such as dotting, sealing, coating or potting fluid materials. Dispenser can dispensing a very small volume to many large volume of watery low viscosity liquids to very high viscosity materials like pastes or grease. Nowadays the areas of new dispensing applications have been very expanding more and more. Performance Parameters: Size 339L*229D*83H Weight 3.5kg Dispense time 0.001~99.99sec+/-0.1% Voltage 110/220VAC Power consumption 135W Temperature Setting range 1-200 Temperature Control Circuit PID Control Temperature Sensor Platinum resistance to measure temperature Standard CE Approved Yes Features and Advantages: 1.Microprocessor-based control 2.Time digital display from 0.001~99.99 3.Cycle:0.05% 4.Liquid pressure adjustable 0~120PIS 0~8KG 5.1year function warranty
Mode:cdx00 Name:digital temperature controller Alarm:two stage alarm Tc/rtd:k, j, pt100, ssr , relay, 4-20ma, 0-10ma. Product's size:48*48/48*96/96*96/72*72.
Humidity Indicator Plugs are designed for mounting on reusable or long-term storage containers, in flexible barrier material, in moisture-sensitive electronic or optical equipment, or in any other humidity controlled enclosure. They readily detect changes in the relative humidity of the space being monitored by one of two means: Reversible Color-Change and Maximum Humidity Indicator.
3 analog input, can be used for pressure, temperature and oil level measurement, and built a variety of sensor selection, can be custom parameters. More can define auxiliary control relay output. More can be defined isolation switch input. The controller panel button is used to select the control mode, start and stop running the program, data display and running protection parameter modification, led indicator for running state indicating the mode of the controller and the generator, lcd display of the measurement parameters and state. Flexible adaptation of rs485, rs232 or usb communication interface, remote monitoring, through communication with the pc, fully realize the remote communication, telemetry, remote control function, operation parameters and can be read out and set the controller. Unit type:piece package weight:1.500kg (3.31lb.) package size:20cm x 18cm x 17cm (7.87in x 7.09in x 6.69in)
Is_customized:yes brand name:woodward model number:8270-1029 place of origin:china (mainland) Unit type:piece package weight:0.500kg (1.10lb.) package size:15cm x 15cm x 6cm (5.91in x 5.91in x 2.36in)
The ems39 is an integrated genset controller which incorporates full engine protection, lcd display of engine temperature, oil pressure, battery volts, speed and genset hours, provides manual start and stop buttons, autostart, and controls excitation of the battery charging alternator. Low cost Fully sequenced starting and stopping with retries Lcd display of starting and running sequence icon alerts against low oil pressure, high engine temperature, low battery volts, excitation failure, high/low engine speed preheat output (if any) starts the engine easily under cold environment Run output (if any) activates on successful engine start and controls load Alarm output (if any) in the event of abnormal operation Autostart imput allows remote control start Speed detection directly from generator, mpu or alternator output Nput can be external shutdown for emgency stop Unit type:piece package weight:0.102kg (0.22lb.) package size:20cm x 20cm x 5cm (7.87in x 7.87in x 1.97in)
Dse5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well. Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (avr). This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 electric (dse5560 must be synchronized with the power) Unit type:piece package weight:2.000kg (4.41lb.) package size:18cm x 18cm x 18cm (7.09in x 7.09in x 7.09in)
Thermostat Detailed screw type bimetal thermostat description 1:auto reset 2:cremis shell 3.6.3*0.8 terminal 4:CQC UL VDE TUV SGS Detailed brass screw bimetal thermostat description fixation of the working temperaturing reliable snap action perdurable less radio interference Technical parameters: Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2.Action temperature range: 45~160 (Optional); temperature accuracy: 3.Recovery and action temperature difference: 8~100 (Optional) 4.Connection method: Insert the terminal 250# (bending angle: 0~90deg optional); Insert the terminal 187# (bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional) 5.Lifespan: over100,000 times 6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7.Contact resistance: less than 50m 8.Insulation resistance: less than100M Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls; Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls. 10.Casing protective class: IP00 11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Precautions: 1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection; 5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40. Passed certifications :CQC UL VDE TUV SGS. according to customers' requirements.
Detailed Product Description Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Name:thermostat model:KI-31 Technical parameters: Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2.Action temperature range: 45~160 (Optional); temperature accuracy: 3.Recovery and action temperature difference: 8~100 (Optional) 4.Connection method: Insert the terminal 250# (bending angle: 0~90¡ã optional); Insert the terminal 187# (bending angle: 0~90 optional; thickness: 0.5, 0.8mm optional) 5.Lifespan: 100,000 times 6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7.Contact resistance: 50m 8.Insulation resistance: 100m Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls. 10.Casing protective class: IP00 11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-31serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Precautions: 1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection; 5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40. Passed certifications :CQC UL VDE SGS. according to our custom.
Thermostat Detailed screw type bimetal thermostat description 1:auto rest 2:cremis shell 3.6.3*0.8 terminal 4:CQC UL VDE TUV SGS Detailed brass screw bimetal thermostat description fixation of the working temperaturing reliable snap action perdurable less radio interference Technical parameters: Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2.Action temperature range: 45~160 (Optional); temperature accuracy: 3.Recovery and action temperature difference: 8~100 (Optional) 4.Connection method: Insert the terminal 250 bending angle: 0~90deg optional); Insert the terminal 187(bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional) 5.Lifespan: over100,000 times 6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7.Contact resistance: less than 50m 8.Insulation resistance: less than100M Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls. 10.Casing protective class: IP00 11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Precautions: 1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection; 5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40. Passed certifications :CQC UL VDE TUV SGS. according to customers' requirements.
Water temperature controller, water-cooled chiller, vertical color mixer, water chiller, cooling tower, claw cutter plastic crusher, rotary color mixer, chiller, plastic crusher, plastic grinder, plastic color mixer, water cooled chiller, air cooled chiller, cooling tower, mold temperature machine, direct-drive hopper dryer, dryer.
Heater, heating element, thermocouple, temperature controller, resistance wire, high temperature cable, China heater.
