Hongchao stainless steel, inc. Has been specilizing the stainless steel industry since 2000. 317l (uns s31703) is a molybdenum-containing austenitic stainless steel that is intended to provide improved corrosion resistance in highly corrosive environments, particularly those containing chlorides or other halides. 317 and 317l containing 3 ~ 4% molybdenum are preferred to types 316 or 316l which contain 2 ~ 3% molybdenum in applications requiring enhanced pitting and general corrosion resistance because of the difference on amount of molybdenum. 317l (uns s31703) is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
M12X1.5-10,M12X1.5-6 Body material: plastic Membrane: ePTFE Sealing ring: silicone ring IP rating: IP67,IP68 Structure: with or without nut Color: white,black,grey application Outdoor lighting lamps, automobile electronic product, telcommunication equipment, sports apparatus and equipment, LED, solar energy systemand other industries
Body material: stainless steel Membrane:ePTFE Sealing ring: silicone ring IP:IP67 Spec: M12X1.5-10,M5X0.8-10,M6X1.0,M10X1.0 Outdoor lighting enclosure, automobile electronic product, telcommunication equipment, sports apparatus and equipment, LED, solar energy and other industries.
Size:D17.5XH13.4 Body material: plastic Membrane:ePTFE Sealing ring: silicone ring IP rate: IP67 Structure: snap-in color: black Applictiona on car ECU,motor ECU,exterior lighting enclosure
stainless steel decorative strips
stainless steel sheet stainless steel sheet
Key advantages of coil winding nozzle/ wire guide nozzle. 1)High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2)Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3)Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4) Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right. Specification of coil winding nozzle/ wire guide nozzle. Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L 1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30 2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35 3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30 4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35 5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30 6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30 Advantage of our coil winding accessaries 1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles. 2. Competitive price 3. Excellent quality of tension device and accessaries 4. Fast response speed 5. Professional tensioner engineering team 6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle. 1)High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing. 2)Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 3)Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm. 4) Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right. Specification of coil winding nozzle/ wire guide nozzle. Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L 1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30 2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35 3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30 4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35 5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30 6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30 Advantage of our coil winding accessaries 1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles. 2. Competitive price 3. Excellent quality of tension device and accessaries 4. Fast response speed 5. Professional tensioner engineering team 6. Good after-sales service
Popular Stainless Steel Support Accessories Universal Tube Adaptor Condition: New Warranty: 1 Year Applicable Industries: industrial Showroom Location: Egypt, United States Marketing Type: Ordinary Product Brand Name: WJ-LEAN Product name: tube accessory Application: Industry Material: steel Characteristic: simple Color: ZINC Delivery Time: 7 Days After Warranty Service: Online support Local Service Location: Egypt, United States
1.2631 is a German Cold work tool alloy steel material grade.it is shock resisting steel. it belong to DIN 17350 standard. Digital Grade material number 1.2631. Metal Steel Grade W-Nr X50CrMoW9-1-1 It is a die steel, use in extrusion moulds, Hot Cast moulds. like aluminium production, Aluminium cutting mold. Our Tool Steel material 100 % ultrasonic tested with good price. Small size steel products make by hot rolled, large size steel products make by forging. 1.2631 with X50CrMoW9-1-1 is equivalent Belong to W-Nr and DIN.
AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel, generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internal strength, making it highly wear resistant. AISI 8620 steel has a higher core strength than grades 8615 and 8617. SAE 8620 alloy steel is flexible during hardening treatments, thus enabling improvement of case/core properties. Pre hardened and tempered (uncarburized) 8620 can be further surface hardened by nitriding but will not respond satisfactorily to flame or induction hardening due to its low carbon content. Steel 8620 is suited for applications which require a combination of toughness and wear resistance. This grade is commonly supplied in round bar.
AISI 1045 steel is a medium carbon, medium tensile steel supplied as forged or normalized. This steel shows reasonable strength and toughness. AISI 1045 steel is characterized by good weldability , good machinability, and high strength . AISI 1045 steel is a versatile medium carbon engineering steel that can be hardened , as well as being flame or induction hardened. This grade of steel is widely used for axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods, metal furniture, metal equipment , building machinery ,electrical equipment etc. one of our client from India bought the AISI 1045 steel from our company , in order to making the automobile parts .the application of the AISI 1045 is widely arranged ,welcome to connect with us if you are considering buy it .I think you will satisfied with our company. Iron is the main part of 1045 steel. However, it does contain certain other elements within a specified range. The first element is carbon, with a range of 0.43 percent to 0.50 percent. Next is silicone, with a range of 0.10 percent to 0.60 percent. The last alloy is manganese, with an allowable range of 0.60 percent to 0.90 percent. Phosphorus may sometimes be found in this product, to a maximum of 0.04 percent. Dongguan Otai Special Steel Co Ltd is A high-technology steel mill in Dongguan, China. Otai Steel supplies a wide range of carbon, alloy and stainless steel products, including high speed tool steel, cold /hot works tool steel, plastic mould steel, engineering steel and machine structural steel etc. Our factory now boasts lathes, grinding equipment, horizontal saws, vertical sewing machines, CNC flame cutting machines, surface, face, plane and end milling machines, plasma cutting machines, and more. If you cooperate with us ,quality assured ,no middle men ,we can provide free tool steel sample. To learn more, contact us any time:
product name: Decorative strip Material:aluminum Size: ï¼?13.8*10cm Weight: 343.0g Process: extrusion Surface treatment: Spray black paint Use: Decorative strip
A2 steel is called DIN 1.2363 and JIS SKD12 steel. 1.2363 steel is a cold work mold steel that is improved on the basis of SKD11 steel. The toughness of 1.2363 steel is twice that of SKD11. The retained austenite is almost all decomposed under the conventional heat treatment conditions. The toughness of 1.2363 steel is great in the cold work mold steel. There are no cracks of industrial products due to be made of A2 steel round bar sheet plate material. A2 Steel Application The application is decided by A2 steel chemical composition and properties. It has high hardness and toughness. The application as below: Precision stamping die. Precision blanking dies for wire cutting and stamping die for various purposes. Cold forging, deep drawing and boring molds. High-speed punching punch, stainless steel plate punch. Shear and slitter blades. A2 Steel Characteristics 1.High toughness. The products that were made of A2 steel material almost no cracking or cracking occurs during the use. 2.The machinability is also better than SKD11 steel. Using 1.2363 steel can increase the service life of the mold and get higher production efficiency. 3.High quench hardening ability. so it can efficiently avoid the defects which be caused by insufficient hardness during vacuum heat treatment. 4.The surface hardness is higher after surface hardening treatment. It can efficiently improve the performance of the mold. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
AISI O2 steel also can be called JIS SKS31 and DIN 1.2842 steel. It is the better type compare with the O1 tool steel. Its content of carbon, chromium and tungsten has been raised. So it has a higher hardenability characteristic, the deformation is small during the quenching. It is a low alloy tool steel which is better than carbon steel at the point of the mechanical property. It has high hardness and wearing resistance. Because of the certain account of vanadium element, the crystal grain is smaller then decrease the overheating sensitivity of the steel. At the meantime, the carbide is getting smaller and the distribution is uniformity. O2 Steel Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. As a professional O2 steel supplier, please contacts us for any request. Songshun Steel always with you. What We Provide Our main products are round and flat bars for alloy steel, tool steel, stainless steel, spring steel, bearing steel and etc. In those years we offers a wide range of high quality steel for engineering machinery, mold tooling, cutting tools manufacturing
O1 steel also is called DIN 1.2510 and JIS SKS3 steel. High content for manganese, chromium and tungsten in 1.2510 steel composition, that could increase the hardening ability. Then the steel does not need to undergo water quenching. After oil cooling and quenching, the hardness could reach 62HRC. O1 tool steel round bar sheet plate was used widely as a cold work mold steel. It is a great material for the blade, metal molds and etc. O1 Steel Application 1.2510 steel is used as a material of tough parts. Such as punches, knock-out pins, cams, and of course, knife blades. And 1.2510 steel is mainly used for short-run tooling for cold forming dies, blanking dies, and cutting tools operating at ambient temperature. Typical applications for O1 tool steel are blanking, forming, and trim dies, gages, slitting cutters and etc. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of O1/1.2510 steels materials. Songshun Steel always with you. Dongguan Songshun Mould Steel Co., LTD which is an industrial and trading company with 3500-7000ts hydraulic forging machine. We provide a great variety of steels, competitive price with good quality and keep the large stock are over 20000 tons.
D6 steel is a high-carbon, high chromium tool steel alloyed with tungsten that is characterized by high compressive strength, high wear resistance, high surface hardness and good hardening stability. It is also called SKD2 steel and DIN 1.2436 steel. And D6 steel chemical composition and heat treatment information are below. Tool steels are primarily used to manufacture tools that can be used for machining metals, woods, and plastics. They are generally ingot-cast wrought products, and have the potential to be stable at elevated temperatures and withstand high specific loads. D6 Steel Application SKD2 steel chemical composition makes it become good tool steel in the industry. SKD2 steel is used for forming tools; molds for abrasive plastics and ceramics; long-run press tools; blanking and shearing tools for hard materials; stamping tools; scraping tools and etc. D6 Steel Round Bar Sheet Plate Heat Treatment Forging SKD2 tool steel is heated slowly and uniformly to 700�°C (1292�°F) and then more rapidly to 900-1050�°C (1652-1922�°F). Annealing SKD2 tool steel is then annealed at 800-840�°C (1472-1544�°F) and cooled. Hardness of the steel after annealing will be approximately 225 Brinell. Stress Relieving Stresses from SKD2 tool steel can be eliminated before hardening by heating up to 650-700�°C (1202-1292�°F), if machining operations have been heavy. The steel is then allowed to cool slowly. Hardening SKD2 steel is pre-heated slowly to 750-800�°C (1382-1472�°F) and thoroughly soaked. Heating is then continued till the final hardening of 950-980�°C (1742-1796�°F), followed by air or oil quenching. Tempering The SKD2 steel is heated uniformly and thoroughly at the selected tempering temperature. Double tempering can also be carried out with intermediate cooling to room temperature. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D6/SKD2 steels materials. Songshun Steel always with you.
D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. D3 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding D3 Steel Round Bar Sheet Plate Heat Treatment Heat Treatment SKD1 steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648 C (1200 F) for one hour and cooled slowly. Annealing Annealing of SKD1 steel needs to be done in a controlled atmosphere furnace. D3 steels should be heated thoroughly to 871 C (1600 F) and cooled slowly at a rate of not more than -6 C (20 F) per hour, until the furnace is black. Then the material should be removed and air cooled. Tempering The SKD1 steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. Hardening SKD1 steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954 C (1750 F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it. Notice Other specifications are determined by daily stock. Customization is also acceptable. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D3 tool steels materials. Songshun Steel always with you.
Heat Treatment DIN 1.2379 steels alloy should be preheated very slowly to 815 (1500 F) and the temperature can be increased to 1010oC (1850 F). Then held at 1010oC (1850 F) for 20 to 45 minutes and air-cooled (air quenched). Annealing Annealing of 1.2379 tool steels material should be done at 871 to 898 C (1600 to 1650 F) followed by slow furnace cooling at 4.4 C (40 F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization. Stress Relieving Heat it slowly to 1050 -1250 F, allow to equalize, and then cool in still air(Strain Relieving) Preheat Prior To Hardening Preheat slowly to 1350 -1450 F and hold at this temperature until steel 1.2379 steel material is uniformly heated. Hardening After thorough preheating, heat to 1800 -1850 F. Hold it at the hardening temperature until it is completely and uniformly heated. Quenching DIN 1.2379 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization on the surface, controlled atmosphere or vacuum furnaces are recommended. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. Tempering The tempering temperature on material 1.2379 steel may be varied according to the desired hardness. 1.2379 steels can be tempered at 204 C (400 F) for achieving Rockwell C hardness of 61 and at 537 °C (1000 F) for a Rockwell C hardness of 54. Compare Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance. D2 Steel Forging Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850 -1950 F and reheat as often as necessary, stopping work when the temperature drops below 1700 F(926 C). After D2 mold steel forging, cool slowly in lime, mica, dry ashes or furnace. D2 steel should always be annealed after forging. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a
D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 Steel Application 1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc. AISI D2 Steel Round Bar Plate Sheet Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D2/1.2379 steels materials. Songshun Steel always with you. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
