Usage: This Hydraulic automatic large size hot stamping machine can print PVC, PET film, paper, diploma cover, card invitation letter, wedding card, folder, plastics, leather, book cover, gift, wood, film, electronic products, etc.Large pressure 20T suit for gilding and emboss on leather, plastic, wood, glass, paper and metal such flat things. Specification: HC-H-1115 Hydraulic automatic hot stamping machine Max print size: 12*16 inch (300*400 mm) Worktable size: 20*16 ½ inch (500*420 mm) Stamp head stroke: 2.76 inch (60mm) Max print speed:1200pcs/hr Foil feed: motor drive Printing temperature:0 to 380 Heating power: 1600 W pressure: 20 000 Kg 20T or 40 000kg(40T) HC-H-1515 Automatic big size hot stamp machine Max print size : 15.7*15.7 inch (400*400 mm) Worktable size: 19.6*25.6 inch (500*650mm) Max print speed:1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*500 W HC-H-1519 Automatic high pressure bronzing machine Max print size : 15.7*19.7 inch (400*500 mm) Worktable size: 31.5*20.5 inch (800*520mm) Max print speed: 1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*800 W HC-H-1523 Automatic plane hot stamp machine Max print size : 15.7*23.6 inch (400*600 mm) Worktable size: 31.5*20.5 inch (800*520mm) Max print speed: 1200pcs/hr Stamp head stroke: 2.76 inch (70mm) Heating power: 6*800 W Advantages: 1) Foil feed and collected automatically, high output. 2) Automatic stamping process, putting and taking off article by hand, other process done fully automatically. 3) Vertical pressure cylinder design to make high and stable high pressure max can be 20 000 Kg. 4) Temperature controller heat to ensure stable printing temperature. 5) Worktable can be adjusted accurately XYZ and angle. 6) Stamping head can be fine adjusted makes bronzing more precision. 7) Print speed, pressure, temperature and time are adjustable. 8) Manual and automatic two printing modes are optional.
Usage: It can print on skateboard, transfer label/film on all sizes and shapes of skateboard. Specification: 1 ) Max print size skateboard wide 11 X 280mm X 14"(360mm 2) Max height of skateboard: 50MM 3) power 380V / 220v 60hz 4) Net weight about 450KG 5) Machine size 680*620*2000MM (L*W*H) Main Parts: 1) Hydaulic device: Deli made in China 2) Stop/Emergency stop: Schneider made in France 3) Motor/speed controller: JSCC made in China 4) Time controller: OMRON made in Japen 5) Temperature-controlled meter: HengBang Made in China
Roller sublimation machine advantages 1.Independent welding table, easy to install and remove. 2.Air up the shaft roller, precise tension control, to ensure that the delivery of paper neat. 3.Anti-pinch device to ensure safe operation. 4.Microcomputer operation panel, simple and reliable. 5.High burning point conveyor blankets, flame retardant performance. 6.blanket thickness uniformity, the transfer effect is good. 7.Teflon coating heating roller, effectively prevent electrostatic interference in the transfer process, roller temperature is small.
Usage: Auto sublimation heat press with 2 stations can print on T shirt, steel plate, signboard, medal, clothing, bags, ceramic, sweatshirt, umbrella, shoes, cap, handwork, gift and advertising products etc. Its good at printing on large size product, like 1 meter long signboard. Specification: HC-TA-3139 Automatic sublimation heat press machine 1) Max print size: 30.7*38.6 inch (780*980mm) 2) Work table size: 31.5*39.3 inch (800*1000 mm) 3) Cylinder stroke49.2 inch(1250mm) 4) Time control0-60seconds 5) Temperature control:: 0-399 6) Max pressure: 8KG/ 7) Heat power: 9K W 8) Net weight: 660 Kg HC-TA-3846 1) Max print size: 38.6*46.4 inch (980*1180mm) 2) Work table size: 39.3* 47.2 inch (1000*1200 mm) 3) Cylinder stroke49.2 inch(1250mm) 4) Time control0-60seconds 5) Temperature control:: 0-399 6) Max pressure: 8KG/ 7) Heat power: 9K W 8) Net weight: 830 Kg
Usage: Automatic one station heat press can print diomand, picture on T shirt, steel plate, medal, cloth, sweatshirt, bags, ceramic, such gift and promotional products. Specification: HC-TA1-11 Automatic heat press machine 1) Worktable size: 15*15 inch (380*380 mm) 2) Heat power: 2000-3500W 3) Max pressure: 100Kg 4) Temperature control: 0-399 5) Time control: 0-99seconds 6) Net weight: 90 Kg HC-TA1-1519 1) Worktable size: 16*20 inch (400*500 mm) 2) Heat power: 2000-3500W 3) Max pressure: 100Kg 4) Temperature control: 0-399 5) Time control: 0-99seconds 6) Size: 1500*700*1650mm 7) Net weight: 100 Kg HC-TA1-1523 1) Worktable size: 16*23 inch (400*600 mm) 2) Heat power: 2000 W 3) Max pressure: 100Kg 4) Temperature control: 0-399 5) Time control: 0-99seconds 6) Size: 1600*800*1750mm 7) Net weight: 130 Kg
Usage: Combo heat press can print on T shirt, plate, caps, mugs, steel plate, medal, cloth, bags, ceramic, sweatshirt etc. Specification: HC-T- 5 in 1 Five in one heat press machine 1) Max print size:11.8*11.8 inch (300*300 mm) / 300*380mm / 380*380mm 2) Mugs diameter: 2-3 inch(50-75mm) 3) Mugs diameter: 3-3.5 inch (75-90mm) 4) Plate diameter: 4.9 inch(125mm) 5) Caps diameter: 3.1*5.7 inch(80*145m) 6) Net weight:40 Kg HC-T- 6 in 1 Six in one heat press machine 1) Max print size:11.8*11.8 inch (300*300 mm) / 300*380mm / 380*380mm 2) Mugs diameter: 2-3 inch(50-75mm) 3) Mugs diameter: 3-3.5 inch (75-90mm) 4) Plate diameter: 4.9 inch(125mm) 5) Plate diameter: 6.1 inch(155mm) 6) Caps diameter: 3.1*5.7 inch(80*140m) 7) Net weight:42 Kg HC-T- 8 in 1 combo in 1 heat press machine 1) Max print size:12*15 inch (300*380mm) 2) Mugs diameter: 2-3 inch(50-75mm) 3) Mugs diameter: 3-3.5 inch (75-90mm) 4) Cone mug size: 12OZ 5) Cone mug size: 17OZ 6) Plate diameter: 4.9 inch(125mm) 7) Plate diameter: 6.1 inch(155mm) 8) Caps diameter: 3.1*5.7 inch(80*140m) 9) Net weight:45 Kg Feature: 1) Multi function transfer machine can print multi kinds of products at the same time. 2) Heat plate is smooth, heating surface even. 3) Print pressure can be fine adjusted, and itâ??s stable during pressing. 4) Teflon coated heating plate make transfer paper easy detach from heating head 5) Electro LCD temperature controller control temperature accurately, tolerance ±1â??. 6) Heatproof silicon foam is durable, and high temperature resistant 400 degrees wonâ??t form. 7) Many sizes of mug are printable.
Use: this shoes heat press can do heat transfer printing on shoes, socks, collar, t shirt and trousers. Specification: Power: 1200W Worktable size: 29*38cm Net weight: 32kgs
Use: It use to dry LED UV ink on articles printed by screen printing, offset printing and pad printing. LED UV dryer is more and more popular Nowdays,it have 5 features compares with traditional UV dryer. 1) It saves a lot of energy/Electricity. 2) Environmental protection, because LED does not produce ozone. 3) Good for health. 4) Longer life,20000hours. 5) No need to warm up/preheat. Specification: Light source type: surface light source Control mode: button control, external control Input voltage: AC 220V, 50Hz Use lamp distance: 5mm ~ 15mm Cooling method: water cooling LED lamp hours: 20000H Number of chips: 1440 pieces Total length of the machine: 2000MM Total width: 1200MM Belt width: 1000MM Total machine height (including lampshade): 1000MM Distance between belt and ground: 850MM Effective irradiation length: 1000MM In-feed length & Out-feed length: adjustable Max height of product: 4inch Speed is adjustable: 5-35 meters per minute The machine comes with: 1pc industrial chiller, 1pc control box, LED lamp and lamp cover.
Usage: Combo heat press can print on T shirt, plate, caps, mugs, steel plate, medal, cloth, bags, ceramic, sweatshirt etc. Specification: HC-T- 4 in 1 Multi function heat press machine 1) Max print size:11.8*11.8 inch (300*300 mm) 2) Work table size: 12.6*12.6 inch (320*320mm) 3) Mugs diameter: 3.15-3.74 inch(80-95mm) 4) Plate diameter: 4.9 inch(125mm) 5) Caps diameter: 3.1*5.7 inch(80*145m) 6) Heat power: 2000 W 7) Max pressure: 100Kg 8) Pressure stroke: 0.78 inch (20mm) 9) Temperature control: 0-300 10) Net weight:32 Kg
Usage: Combo heat press can print on T shirt, plate, caps, mugs, steel plate, medal, cloth, bags, ceramic, sweatshirt etc. Specification: HC-T- 4 in 1 Multi function heat press machine 1) Max print size:11.8*11.8 inch (300*300 mm) 2) Work table size: 12.6*12.6 inch (320*320mm) 3) Mugs diameter: 3.15-3.74 inch(80-95mm) 4) Plate diameter: 4.9 inch(125mm) 5) Caps diameter: 3.1*5.7 inch(80*145m) 6) Heat power: 2000 W 7) Max pressure: 100Kg 8) Pressure stroke: 0.78 inch (20mm) 9) Temperature control: 0-300 10) Net weight:32 Kg
Usage: Combo heat press can print on T shirt, plate, caps, mugs, steel plate, medal, cloth, bags, ceramic, sweatshirt etc. Specification: HC-T- 8 in 1 Multi function heat press machine 1) Max print size:11.8*11.8 inch (300*300 mm) 2) Work table size: 12.6*12.6 inch (320*320mm) 3) Mugs diameter: 3.15-3.74 inch(80-95mm) 4) Plate diameter: 4.9 inch(125mm) 5) Caps diameter: 3.1*5.7 inch(80*145m) 6) Heat power: 2000 W 7) Max pressure: 100Kg 8) Pressure stroke: 0.78 inch (20mm) 9) Temperature control: 0-300â?? 10) Net weight:32 Kg
Usage: UV curer dry UV varnish printed on paper, board, metal sheet, PCB, automobile, shoes, PVC, plastic such thin products, inks will not come off from article after drying by UV curing machine. UV dryer can do spot UV, theory is light up the UV lamp in flash high voltage condition in order to ultraviolet shine on the surface of product and let UV varnish and inks dry quickly. Specification: HC-AUVD-1978 UV curing machine 1) Max curing size:19.6*2.3 inch (500*60mm width*height) 2) Conveyor length: 78.7 inch (2000mm) 3) Speed: 0~12M/MIN Stepless speed regulating 4) Conveyer material: Teflon 5) Lamp power: 3KW/380VÃ?2pcs 6) Motor power: 1000W/1P/380V 7) Fan power: 500W/380V 8) Total power: 7KW 9) Net weight: 300KG. HC-AUVD-3178 UV dryer 1) Max curing size: 31.5*2.3 inch (800*60mm width*height) 2) Conveyor length: 78.7 inch (2000mm) 3) Speed: 0~12M/MIN Stepless speed regulating 4) Conveyer material: Teflon 5) Lamp power: 3KW/380VÃ?2pcs 6) Motor power: 1000W/1P/380V 7) Fan power: 500W/380V 8) Total power: 7KW 9) Net weight: 330KG.
Use: It use to dry LED UV ink on articles printed by screen printing, offset printing and pad printing. LED UV dryer is more and more popular Nowdays,it have 5 features compares with traditional UV dryer. 1) It saves a lot of energy/Electricity. 2) Environmental protection, because LED does not produce ozone. 3) Good for health. 4) Longer life,20000hours. 5) No need to warm up/preheat. Specification: Light source type: surface light source Control mode: button control, external control Input voltage: AC 220V, 50Hz Use lamp distance: 5mm ~ 15mm Cooling method: water cooling LED lamp hours: 20000H Number of chips: 1440 pieces Total length of the machine: 2000MM Total width: 1200MM Belt width: 1000MM Total machine height (including lampshade): 1000MM Distance between belt and ground: 850MM Effective irradiation length: 1000MM In-feed length & Out-feed length: adjustable Max height of product: 4inch Speed is adjustable: 5-35 meters per minute The machine comes with: 1pc industrial chiller, 1pc control box, LED lamp and lamp cover.
Usage: Mug heat press can print on mugs, cups, transfer printed colourful picture to cup, its widely use advertisement, gift, promo and Personalized adornment. Specification: HC-T- mug heat press machine 1) Max diameter of mug: 2.36 inch (60mm) 2) Min diameter of mug: 1.37 inch (35mm) 3) Heat power: 350 W 4) Max pressure: 100Kg 5) Time control: 0-999seconds 6) Temperature range: 0-399 7) Size: 350*350*250mm 8) Net weight:10 Kg
Usage: Cylinder UV cure dry UV varnish and UV ink printed on bottles, as plastic bottle and other round metal and glass material article. Bottle rotate automatically in the UV dry area to make sure UV light irradiate on bottles fully. Specification: HC-AUVD-1347 Cylinder UV dryer 1) UV system Conveyor width: 13.7 inch (400mm) 2) UV system Conveyor length: 47.2 inch (1200mm) 3) Max size of article: 13.7 inch *3.5 inch (400*90mm) 4) Speed: 1800~3000Pcs/Hr 5) Conveyor Speed: 0~10M/MIN 6) Stepless speed regulating 7) Lamp power: 4KW 8) Total power: 5KW
Automatic glue spraying compound machine for filter material: It is a professional glue spraying compound machine successfully developed by Haobang company according to customer needs,This machine uses hot melt adhesive to compound materials,spray glue evenly and bond firmly without affecting the function of the filter layer,using PLC man-machine interface control,servo controlled winding tension is stable,the glue spraying system can precisely control the glue spraying amount,and the composite product has no solvent residue,the glue spraying system is operated independently,glue spraying heating speed is fast,no drying required,fast compound speed,the glue consumption per square meter can be adjusted,the winder can be equipped with automatic slitting function,the product width can be customized according to customer requirements.
The whole machine uses ultrasonic principle for needle wireless stitching,Suitable for all kinds of fabric composite pressurized,For example :non-woven fabrics Artificial leather,high production efficiency,product width unlimited, automated production,simple replacement of mold,can be different pattern products.
XYZ axis table screw locking machine Desktop Automatic screwdriver Machine Product Description: Automatic screw locking machine is mainly composed of screw automatic conveying system, x-y-z movement platform, control system and locking system. The work efficiency is much higher than the traditional manual work, when the screwdriver lifts up after locking a screw, another screw is already air-blown to the driver for locking. Machine can operate continuously, especially for multiple same size items. This series screwdriver machine is suitable for M1-M10 screws, mainly applicable for socket, switch, LED, valve, toy, automobile, household appliances, 3C industry etc.
XYZ axis table screw locking machine Desktop Automatic screwdriver Machine Product Description: Automatic screw locking machine is mainly composed of screw automatic conveying system, x-y-z movement platform, control system and locking system. The work efficiency is much higher than the traditional manual work, when the screwdriver lifts up after locking a screw, another screw is already air-blown to the driver for locking. Machine can operate continuously, especially for multiple same size items. This series screwdriver machine is suitable for M1-M10 screws, mainly applicable for socket, switch, LED, valve, toy, automobile, household appliances, 3C industry etc. Main Features: 1.Wild universality, small in size, can cooperate with production line, convenient for product replacement. 2.Double Y platforms design can be turn operation, it can continuously running, on table for fastening, another table for placing products, safe and convenience, fast speed, high efficiency. 3.It can be equipped with manipulator to realize automatic feeding to conveyor belt, which greatly improve the flexibility of operation. 4.Rotary disc screw feeder and vacuum suction screw taking mode to avoid screw jamming and screw crooked phenomenon. 5.It has the detection functions of leak lock, sliding teeth, floating lock and so on. It can effectively reduce the QC work. 6.Only adjusting fixture can realize screw locking of different products, and the utilization rate of equipment is high. 7.Using the special multiple-aixs controller for locking screw, the hand-held teaching device is easy to operate, especially for the points of coordinates, the efficiency is higher.
XYZ axis table screw locking machine Desktop Automatic screwdriver Machine Product Description: Automatic screw locking machine is mainly composed of screw automatic conveying system, x-y-z movement platform, control system and locking system. The work efficiency is much higher than the traditional manual work, when the screwdriver lifts up after locking a screw, another screw is already air-blown to the driver for locking. Machine can operate continuously, especially for multiple same size items. This series screwdriver machine is suitable for M1-M10 screws, mainly applicable for socket, switch, LED, valve, toy, automobile, household appliances, 3C industry etc. Main Features: 1.Wild universality, small in size, can cooperate with production line, convenient for product replacement. 2.Double Y platforms design can be turn operation, it can continuously running, on table for fastening, another table for placing products, safe and convenience, fast speed, high efficiency. 3.It can be equipped with manipulator to realize automatic feeding to conveyor belt, which greatly improve the flexibility of operation. 4.Rotary disc screw feeder and vacuum suction screw taking mode to avoid screw jamming and screw crooked phenomenon. 5.It has the detection functions of leak lock, sliding teeth, floating lock and so on. It can effectively reduce the QC work. 6.Only adjusting fixture can realize screw locking of different products, and the utilization rate of equipment is high. 7.Using the special multiple-aixs controller for locking screw, the hand-held teaching device is easy to operate, especially for the points of coordinates, the efficiency is higher.
