Apply to b class motors, appliances, instrumentions, various types of electric components and winding for coils Having the approval of UL ( File no.E227047), ROHS, ISO9001:2008, ISO14001:2004 AND ISO/TS 16949. Wires in accordance with iec/nema/jis executive standard. General neutral packing or packing as your requirement.
65279,65279 can be soldered without removal of coating, and easy to be dyed. Small dielectric loss under high frequency apparatus and good pinhole test performance. Apply to replays, micro-motors, transformers, instrumentation and various kinds of electric components and with for coils. Products have the approval of Ul ( file no.E227047), rohs, ISO9001:2008, ISO14001:2004 and ISO/TS 16949. Wires in accordance with IEC/NEMA/JIS executive standard. General natural packing or pack by your requirement.
Our enameled wire are extensively applied in transformer, motor for air-conditioner, refrigerator, ice-box, washing machine, auto motor, compressor, microwave stove, charger, ballast, relay, degaussing coil, etc.
Polyesterimide enameled copper round wire with a bonding layer, class 180 Features: excellent adhesion at high temperature through fusion an setting processer. Higher softening temperature. Applicable standard: IEC 60317-37 Typical applications: high output voice coils, high output motors, electrical tools, heat-resistance motors.
Standard: GB/T 2059-2000 GB/T2067-1980 GB/T2069-1980 GB/T11089-1989 Length :5.8m 6m or as your required Chemical Composition: Cu:60.5~63.5 Ni:0.5 Fe:0.15 Pb:0.08 Impurity:0.5 Zn: left Applications: chemical processing, petrochemicals industry, oil refineries. Copper bar is widely used in boat building, war industry, car industry and communication industry where the components need good wear proof and great corrosion resistance. Packaging: Plywood case or as customer`s requirement.
TJR-1,2,3 flexible twisted copper wire (copper busbar): TJR Soft copper wire product quality standards and by GB/T12970.2-2009 special requirements of users, high-quality oxygen-free copper rod as raw material, low resistance, widely used in mechanical, electrical, metallurgical, refrigeration, plumbing, chemical , automotive, electronics, instrumentation and other industries and all kinds of accessories. Our products are numerous large-scale iron and steel, transformer and smelting enterprises to use, well received.
Copper-magnesium twisted wire is mainly used to make the carrier cables and supporting wires in the contact networks of electric railway. Electrification of the railway transport for copper-magnesium alloy wire (catenary), particularly suitable for the heavy electric railway transportation, as copper alloy magnesium alloy wire to strengthen and reinforce the role of processing, mechanical strength, corrosion resistance , thermal stability, overload and other high performance composite materials, fully able to meet the needs of high-speed electrified railway operation.
Bi-metal strip (sheet/plate) backed with high quality low carbon steel and sintering bronze powder on the surface,is forming by several time high temperature sintering and extrusion rolling. Then it can be produced into bushing by blanking, rolling, forming, sizing, tinning and other machining. With excellent wear resistance and good physical and mechanical properties,this kind of bi-metal strip (sheet/plate) is a kind of ideal ease-friction material, applying to producing sliding bearing, thrust washer, lateral plate, bearing bushing and other mechanical components, especially in auto industry. 35kg/bag With Waterproof Paper.
Copper scrap. Packed in flexible freight bags.
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. Typical application for c17200 beryllium copper alloys: Electrical industry: electrical switch and relay blades, fuse clips, switch parts, relay parts, connectors, spring connectors, contact bridges, belleville washers, navigational instruments, clips Fasteners: washers, fasteners, lock washers, retaining rings, roll pins, screws, bolts Industrial: pumps, springs, electrochemical, shafts, non sparking safety tools, flexible metal hose, housings for instruments, bearings, bushings, valve seats, valve stems, diaphragms, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, bourdon tubes, wear plates on heavy equipment, bellows Available sizes: Custom diameter & sizes, random mill lengths Available products (forms): Round bars, round strips, round wires, round tube, Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils Custom shapes are available upon request. Wooden cases
Cube2pb--c17300 (cda 173) the leaded beryllium copper is identical to a version of lead-containing alloy c17200 and achieves the same exceptional strength after hardening. C17300 rods contain a small amount of lead to provide an alloy tailored for automatic machining operations and the lead promotes formation of finely divided chips thus extending cutting tool life. Typical application for c17300 leaded beryllium copper alloys: Electrical industry: switch parts, relay parts, electrical connectors, fuse clips, contact bridges, electrical motor components, navigational instruments, electrical switch and relay blades. Fasteners: washers, fasteners, lock washers, retaining rings, roll pins, screws, bolts Industrial: bushings, non-sparking safety tools, shafts, pumps, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, bourdon tubes, bellows, electrochemical springs, flexible metal hose Available sizes: Custom diameter & sizes, random mill lengths Available products (forms): Round bars, round wires, round tube Flat bars, square bars, rectangular bars, hexagon bars, plates Custom shapes are available upon request. Wooden cases
Cuni2si uns.C64700/c70250 nickel silicon bronze alloys, which is an age-hardening alloy, higher alloyed in comparison with cuni1.5si, for current-carrying formed parts. It has an a-structure with very fine precipitations and recommends itself both for lead frames which require a high rigidity of the pins and for connector with high demands on the electrical conductivity, strength and relaxation behavior. In addition, the cuni2si can also be used for current-carrying formed parts and contact springs due to its good fatigue strength, forming and spring properties. Typical application for c64700/c70250 nickel silicon bronze alloys: Electrical : resistance welding electrodes, motor rotor bar, and resistance welding tips. Fastener : fastener parts Industrial : brazing rod, welding rod Available sizes: Custom diameter & sizes, random mill lengths Available products (forms): Round bars, flat bars, square bars, rectangular bars, hexagon bars Custom shapes are available upon request. Wooden cases
Cuco217500 (cda 175) cobalt beryllium copper is primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a cobalt alloying addition (2.40-2.70%). C17500 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and rb 100 respectively. Typical application for c17500 cobalt beryllium copper alloys: Electrical industry: fuse clips, switch parts, relay parts, connectors, spring connectors Fasteners: washers, fasteners Industrial: springs, seam welding dies, resistance welding equipment, resistance and spot welding tips, tooling for plastic moulds, die casting plunger tips. Available sizes: Custom diameter & sizes, random mill lengths Available products (forms): Round bars, round wires, round tube, Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils Custom shapes are available upon request. Wooden cases
Cuni217510 (cda 1751) nickel beryllium copper is the mirror image of alloys c17500 in terms of its properties & characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and rb 100 respectively. Typical application for c17510 nickel beryllium copper alloys: Electrical industry: fuse clips, switch parts, relay parts, connectors, spring connectors, instruments parts Fasteners: washers, fasteners Industrial: springs, thermal transfer plates, welding equipments, high flux electromagnets, die casting plunger tips. Available sizes: Custom diameter & sizes, random mill lengths Available products (forms): Round bars, round wires, round tube, Flat bars, square bars, rectangular bars, hexagon bars, plates, sheets, coils Custom shapes are available upon request. Wooden cases
Specifications Polyester enameled round aluminum wire have pased ul and rohs. Size:0.10-4.5mm Item:polyester enameled round aluminum wire Temperature grade:class 130/155/180 Featrues:high adhesiveness, thermal stability, chemical resistance Application:motors of power tool, micro-motors and transformers, electronic componments, instrument windings, step motors, communication equipment, small-sized motors. Standard:we produce according to iec, jis, nema as reference or customer's requirement. Packing:we produce with different plastic spools according to different size the outer packing is carton at last, put all cartons on a pallet in order to keep much safer. According to different size the outer packing is carton at last, put all cartons on a pallet in order to keep much safer.
1.130, 180, 200 centigrade; 2. 0.20mm~4.5mm; 3. Few pinholes; 4. Competitive price; Ecca wire: 1. Temperature class:130, 180, 200 centigrade; 2. Performance features: It has good performance of high temperature-resistance, cold-resistance, radiation-resistance, softening-resistance, and freeze-resistance. The heat-resistance temperature is higher than that of polyesterimide polyamide-imide compound copper over-coated aluminum enameled wire. It has good electrical conductivity. The density of aluminum is low (just 40 percent of that of copper enameled wire). It is light and the length in each unit weight can reach 2.5-2.7 times than that of copper enameled wire. By using this material, the cost can be reduced by 30 percent above. The heat-resistance temperature can reach as high as 240 centigrade. 3. Main applications: Used as the winding wire of electric machine or electrical appliance working under high temperature, severe cold, radiated, over-loaded environment. 4. Specification: Diameter 0.20mm~4.5mm (thin coat, thick coat, coat requested by clients) Pt 15, pt25, pt60
Specifications 1.0.10~4.50mm 2.Use in winding machine/motor/transformer 3.Good heat resistance Polyesterimide enameled copper wire (eiw/qzy) 1. Thermal classification: f h class 2. Diameter: 0.1~4.50mm 3. Performance and characteristics of products: A> very good heat resistance, heat shock resistance and solvent resistance. B> good for high-speed winding due to its C> crazing in solvent with stress. 4. Main application areas: Dry transformer. Heat resistance. Generator. Electric tool motor. High speed motor and generator. Hvt for microwave oven. Used for automotive coils as relays and ignition coils, in transformers and in solenoids. Pt15 pt25 pt60
Polyester(amide-imide) magnet wire Specifications range: diameter 0.100-- 3.500mm Implementation of the standards: iec317, nema, jis, gb6109, enterprise standard or customer standard Product characteristics: it has excellent resistance to heat, wear and refrigerant. Application areas: it is applied to electric machinery with high temperature, high speed and frequent start, impervious Category: high temperature resistant and refrigerant resistant enamelled Thermal class: 220c Pt15, pt25, pt60
SB 75, Copper tube, C10200, 19.05MM X 1.65MM Plywood case
Polyester-imide enameled copper round wire, class 180(0.05mm-2.00mm) Polyurethane enameled copper round wire, class 130, 155, 180 (0.02mm-3.0mm) Solderable polyester-imide enameled copper round wire , class 180( 0.016mm-2.5mm) Polyester enameled copper round wire, class 155(0.02mm-2.50mm). 0.02-3.0mm.
