Place of origin:united states
Products status:stock, used
Chipset manufacturer:intel
Graphics card type:integrated
Brand name:for dell
Socket type:lga 755
Application:desktop
Form factor:micro-atx
Hard drive interface:sata
Memory type:ddr3, sdram
Fsb / ht:1333, 1066, 800mhz
Model number:mig41r
Condition:tested ok, work perfect
Free shipping:yes
Warranty:90days
Socket type:socket 775
Number of memory slots:4
Mpn:7n90w.
CPU/Processor
Socket: AM3 only
HyperTransport 1.0 only
2000 MT/s (2.0 GT/s) or 1600 MT/s (1.6 GT/s), depending on the processor.
Memory support is DDR3 modules only.
Supports the following processors:
AMD Phenom II X4 9xx/9xxe/8xx Quad-Core (D)
AMD Phenom II X3 7xx/7xxe Triple-Core (H)
AMD Phenom II X2 5xx (C)
AMD II Athlon X4 6xx/6xxe (P)
AMD II Athlon X3 4xx/4xxe (R)
AMD II Athlon X2 2xx/2xxe (R)
AMD Sempron 1xx (S)
Max TDP = 95 Watt
Front-side bus (FSB)
HyperTransport 1.0 ONLY, based on the NVIDIA GeForce chipset requirements
2000MT/s (2.0 GT/s)
Chipset
NVIDIA GeForce 6150SE nForce 430
BIOS features
Keyboard combination to used to enter BIOS: F10
System BIOS core brand: Award
Form factor
9.6" (24.5 cm) x 9.6" (24.5 cm)
Memory
Dual channel memory architecture
Two DDR3 DIMM (240-pin) sockets
Supported DIMM types:
PC3-8500 (DDR3-1066)
PC3-10600 (DDR3-1333)
Non-ECC memory only, unbuffered
Supports 2GB DDR2 DIMMs
Supports up to 4 GB* on 32 bit PCs
NOTE: *32-bit operating systems cannot address a full 4.0 GB of memory.
Expansion slots
One PCI
One PCI Express x16 graphics (for a graphics card)
Two PCI Express x1 (for cards such as network, sound, tv-tuner)
Video graphics
Integrated graphics using nVidia GeForce 6150SE
Also supports PCI Express x16 graphics cards*
NOTE: *Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
Serial ATA
Four SATA connectors:
SATA0 = Blue
SATA1 = White
SATA2 = Light Blue
SATA3 = Yellow
Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector
Speed up to 1.5Gb/sec or 3.0Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications
NOTE: The faster rate of 3.0Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec.
Onboard USB
USB 2.0
Ten ports total
Four connectors on back panel
Four additional headers on motherboard support 6 additional ports/devices
NOTE: Some USB ports may not be available externally for customer use. For more information, see model specifications.
Back panel I/0
One VGA port
Four USB 2.0
One RJ-45 networking port
Stereo-mini audio jacks for:
Microphone-in (pink)
Line-out (lime)
Line-in (light blue)
Internal connectors
One CPU fan connector
One 24-pin ATX power connector
One 4-pin ATX power connector
One ROM recovery connector
Four SATA connectors
One ROM recovery connector
One jumper for resetting BIOS settings
One jumper to clear the BIOS password setting
One system panel connector
One AC Power Loss Restart Selector
Four USB headers, supporting 6 USB connections
One S/PDIF out connector
One Front audio connector for headphone and microphone
One chassis fan connector.
º LGA1155 socket for new 2nd Generation Intel® Core? i7 series processor/Intel® Core? i5 series processor/Intel® Core? i3 series processor/Intel® Pentium® processors/Intel® Celeron® processors
CHIPSET º Intel® H67 Express Chipset
MEMORY º Dual-channel DDR3 memory architecture
º 4 x 240-pin DDR3 DIMM socket support up to 32GB*
º Support DDR3 1333/1066 SDRAM
º *(Due to the DRAM maximum size is 4GB at present, the memory maximum size we have tested is 16GB)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS.
For Windows® 64-bit OS with 64-bit CPU, there is no such limitation
EXPANSION SLOT º 2 x PCI Express Gen 2.0 x16 slots
º 1 x PCI Express x1 slot
º 2 x PCI slots
º *The second PCIEX16 only support bandwidth x4
STORAGE º Support by Intel® H67
? 4 x Serial ATA 3.0Gb/s devices
? 2 x Serial ATA 6.0Gb/s devices
AUDIO º Realtek ALC892 8-Ch High Definition audio CODEC
º Compliant with HD audio specification
LAN º Realtek 8111E Gigabit LAN Fast Ethernet Controller
REAR PANEL I/O º 1 x PS/2 keyboard/mouse combo port
º 1 x RJ45 LAN connector
º 1 x Audio port (Line-in, Line-out, Mic-in)
º 1 x Clear_CMOS button
º 8 x USB 2.0 ports
INTERNAL I/O CONNECTORS & HEADERS º 1 x 24-pin ATX Power Supply connector
º 1 x 8-pin ATX 12V Power Connector
º 1 x 4-pin CPU_FAN connector
º 1 x 3-pin PWR_FAN connector
º 1 x 3-pin SYS_FAN connector
º 1 x Reset button
º 1 x Speaker header
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 1 x SPDIF out header
º 1 x Clear CMOS header
º 1 x Serial port header
º 1X Power on LED (Green light)
º 1X Stand by LED (Red Light)
º 4 x SATA 3Gb/s connectors
º 2 x SATA 6Gb/s connectors
º 3 x USB 2.0 headers support additional 6 USB ports
º 1 X EZ charger
SYSTEM BIOS º AMI BIOS with 32Mb SPI ROM
º Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
º Supports ACPI & DMI
º Audio, LAN, can be disabled in BIOS
º F7 hot key for boot up devices option
º Support eJIFFY
º Support eBLU
º Support eDLU
º Support eSF
º Support Page Up clear CMOS Hotkey
º Supports ACPI revision 3.0 specification
º Support ECS M.I.B III Utility
CPU voltage adjustable
Features
400MHz Atmel AT91SAM9G20 ARM core processor with DSP Instruction Extensions and ARM Jazelle? Technology for Java? Acceleration
64MB 133MHz high speed SDRAM , 256MB NAND FLASH
10/100 baseT Ethernet
SD/MMC with SDHC support
2 USB Host port
1 USB device port
1-channel CAN2.0 Bus
6 RS-232 Serial Port
1 RS-485 Serial Port
1 x 4-channel 10-bit ADC
1 SPI and 1 IIC intreface
Real-time clock and watch-dog timer
Digital I/O
Hardware
System
CPU: Atmel AT91SAM9G20 (ARM926EJ core with MMU capable of 400MHz operation)
RAM: 64Mbyte SDRAM
Flash: 256Mbyte Nand Flash
RTC: Battery backed Real Time Clock/Calendar
EEPROM: 4kbit EEPROM
Watch-Dog: On chip watch-dog timer
Data Transfer Interface
UARTS: 7 serial Port(6 RS232 serial port, 1 RS485 Serial)
Debug: 3-wire RS232 serial port,
COM0: 5-wire RS232/TTL serial port,
COM2: 5-wire RS232/TTL serial port,
COM3: 3-wire RS232/TTL serial port
COM4: 3-wire RS232/TTL serial port
COM5: 3-wire RS232/TTL serial port
COM1: 5-wire RS485/TTL serial port,
Net: 10/100M Ethernet interface(MAC was on AT91SAM9G20 chips)
USB: 2 USB 2.0 Full Speed Host & 1 USB 2.0 Full Speed Device ports
CAN: 1-channel CAN2.0 Bus
SD: 1 SD/MMC card slot
SPI: 1 High-Speed SPI ports
IIC: Hardware I2C port
A/D: 1 x 4-channel 10-bit ADC
Others
Button: 1 Reset button
LED: 1 battle LED, 1 user LED
Buzzer: 1 Buzzer.
Mechanical
Dimensions: 126mm x 86.5mm
Temperature: -10¡ãC to 70¡ã C
Power supply: 12V .
More product info: http://www.armdevs.com
Email: sales@armdevs.com
Please feel free to contact us if any items are of your interest.
Core board: x86 atom z510-540
Chipset: intel sch
Frequency: 1.0-1.86 ghz
Bus frequency: 533mhz
Memory: ddr 1gb
Hdd: 64g
Graphics: integrated gfx core(133mhz), with vga output.
Peripheral board can be customized
Video input device: built-in 1.3 million pixel coms camera
Audio: integrated ac97 audio system that support high definition audio and stereo audio
Nic: rj-45 standard interface 10/100m lan fast ethernet
Wireless lan: built-in wifi wireless nic
Usb: usb2.0 íß 2, support for usb2.0 external mouse and keyboard operation
Gps navigation: built-in gps module
Communications: built-in 3g module, support for 3g internet access
6 deceleration motor
Detection sensor interface (infrared or ultrasound)
Including various examples of source code(input, output, timers, serial port, external interrupt,
The robot walks, tracking, etc.)
The sam9g45 arm9 board is a new released compact board by embest in 2010, based on the atmel at91sam9g45 processor, works at up to 400mhz and provides plenty of internal memory and external memory. The board features a wide range of peripherals, including uart, usb host, usb device, ethernet, sd/mmc, micro sd, tft lcd, user extension interfaces, key buttons and iis audio input/output jack. In addition, the board supports linux2.6 and wince6.0 os, with free relevant board support packages (bsps). In addition, it offers plenty of example programs which makes your design and development much more easier.
Hardware features:
- support linux2.6 and wince6.0 os, with free relevant board support packages (bsps)
- includes one 4.3" qvga 480x272 lcd panel with resistive touch screen
- cpu: atmel at91sam9g45 (arm926ej-s core), 400mhz
- on-chip memory: 64kb rom & 64kb sram
- external memory: 256mbnandflash, 2mb norflash, 4mb dataflash & two 64mb ddr2 sdram
- four uart interfaces
- one high-speed usb host port
- one high-speed host device port
- one jtag debug interface
- one 10/100 ethernet interface
- one sd/mmc card interface
- one micro sd card interface
- one iis audio output port
- one iis audio input port
- two user buttons
- one wake-up button
- one reset button
- one user led
- one power led
- 60 i/o pins user extention interface
- power: 5vdc from connector, with back-up battery on board
- working temperature: -10 to 70 deg c
- dimension: 120 x 90 mm
Deliverables:
1) atmel sam9g45 arm9 development board
2) mini usb cable
3) ethernet cable
4) db9 to dip10 serial cable
5) 20pins to 10pins jtag cable
6) 4.3" qvga 320x240 lcd panel with resistive touch screen
7) power adapter: aps315-1212, 12v, 1.25a
Hp dv2000 intel 965 pm. It is good working and all goods tested.We have good engineer and good packing for goods .And good price for wholesell.If you are intertested in us , contact me.
The QLogic SANblade QLA2342 host bus adapters (HBAs) offer two independent channels of 2-Gbps Fibre Channel combined with 64-bit, 133-MHz PCI-X. Enabling double IOps with only one PCI/PCI-X slot, the QLA2342 eliminates traditional host bottlenecks that impede the high performance of 2-Gbps Fibre Channel. This union of the fastest I/O and host technologies creates the perfect balanced solution.
Newly packed & unused, and fully tested in the normal working conditions with 1 year warranty.
Conforms with PCI Local Bus Specification, Revision 2.2
64-bit, 66-MHz PCI interface compatible with 32-bit/33-MHz PCI slots
64 MB of on-board RAM
Supports the SATA Specification, version 1.0
RAID levels 0, 1, 5, 10 and simple volume (JBOD)
Operating system-independent configuration and RAID creation using the BIOS RAID Configuration utility
Flash ROM for easy upgrades of the controller BIOS and the BIOS RAID Configuration utility
Event logging and broadcasting, including messaging for alphanumeric pagers
Audible alarm for data safety.
Introduction
GIGABYTE GA-GC330UD integrated the latest Intel 45nm Atom Dual-Core 330 processor provides an easy-to-use flexibility and cost effective platform. The new architecture of Atom 330 enable the lowest power consumption and smallest form factor for thin client and fundamental use. Enhanced with all solid capacitors design, GA-GC330UD brings small yet powerful and stable platform.
Intel 945GC+ ICH7 chipset
1,Ultra Durable 3 Technology with copper cooled quality for lower working temperature
2,Supports 45nm Intel Atom 330 dual core Processor
3,Integrated Intel Graphics Media Accelerator 950 (Intel GMA 950)
4,All solid capacitors design
5,Integrated High Definition audio
6,High speed 10/100 LAN connectivity
7,Integrated SATA 3Gb/s interface
8,Mini size for flexible use.
