Stylish and elegant appearance
Support printing dot map of different density and loaded map.
Paper end sensors and paper nearly end sensors function
Add two cashbox driver signals
Printer head overheat protect function
Abundant figure/curves/characters/barcode print function
Easy to use and simple to maintain
Easier paper loading
Itemspecification
Printing methoddirect thermal line printing
Cashboxtwo cashbox driver signals
Paper out detectionpaper end sensors and paper nearly end sensors function
Paper loading wayeasy paper loading
Paper width57 mm
Print width48 mm
Resolution ration8 dots/mm(384 dots/line)
Life of printing head6+106 character lines
Printing speed40mm/sec
Character 6x8dots , 12x24dots
Chinese character librarygbk, 24x24dots
Outline dimension(wxhxd mm)116mmx184.5mmx92mm
Paper suppliedthermal roll paper (57mm wide, 60mm°)
Interfaceserial (rs-232c, ttl) /parallel interface / usb interface
Input powerdc 12v-24v , 25w
Operating temperature5¦c ~ 50¦c
Storage temperature-20¦c ~ 60¦c
Operating humidity10¦c ~ 80¦c
Storage humidity10¦c ~ 90¦c
Printing Resolution DPIú¦ 200 DPI
Height of Characterú¦Print height range is 1mmí½18mm.
Automatic Printing: Date, time, lot No, Shift No, Sequence No. etc.
Message Memoryú¦ Save up to 100 messages and 100 symbols
Texts Lengthú¦Max. 200 characters per message
Sequence No: 1-9 variable numbers
Printing Speed: Maximum 35 meters /minute and the speed isní»t influenced when printing more lines.
Auto voltage selectionú¦AC 110- 220V
Energy Consumptionú¦Average lower than 100W
Operation Temperatureú¦1íµ-37íµú+Humidity 30% - 70% .
Width of Spray Head: 18mm
Best printing Distance: The distance between the spray head and printing objects should be 5-10mm
Printing Direction: The spray head can be adjusted 0-180íp vertical downward or vertical updward, from left to right horizontally
Automatic Printing: Date, time, lot No, Shift No, Sequence No etc.
Message Memoryú¦ Limitless memory space for messages
Text Lengthú¦Max. 250 characters.
Sequence No: 1-9 variable numbers
Printing Speed: Maximum 35 meters /minute and the speed isn't influenced when printing more lines.
Feature
-Compact design and fast installation
-Easy to be integrated at any position of the production line
-Original design, small size and lightweight, equipped with a small table or mounting bracket with the use of production line
-More further environmental protection and energy saving
-Un-contact processing, more environmental protection, lower power, fast laser marked
-Easy to use and Excellent compatibility
-Simplicity of operation, easy to use, powerful anti-jamming performance, enough memory, multiply input and output interface, use with automatically anti-counterfeit and anti-disorder system
-Adopt import laser, more safer and faster
Applications
Food, beverage, tobacco, electronic component, pharmaceuticals, ceramic wares, automobile part, electrical wire, cable, arts and crafts, rubber
1) Refrigerate Style: Air-cooled, Water-cooled
2) Wave length: 10.6mm
3) Line Width: 0.02mm
4) Depth: 0.04mm (up to the material)
5) Industrial Controller: Industrial control computer
6) Print Content: Character, logo, barcode, two-dimension code, image, graphics, DOT mosaic
7) Operating Range: Embedded many kinds of laser marked font, automatically serial number, Can be static and dynamic operation, automatic input with time and date change
8) Information Input: Keyboard, USB, serial data communication
9) Interface: Ethernet, USB, RS232
10) Focus: Standard focus 110mm, 70 to 250mm optional
11) Pipelining Speed: 150M per minute
12) Protection: Host optics closed, dust proof
13) Work Conditions: 5-50 centigrade, humidity below 95% Non condensing
14) Power supply: AC220V 50Hz 1000W
1183 Computer Printers Materials Suppliers
Short on time? Let Computer Printers Materials sellers contact you.
Feature
Print consistently high quality images even on structured and uneven surfaces
Print features include Text, Date, Time, Batch Number, Logo And Trademark
Easy to be integrated at any position of the production line
User friendly interface and most reliable ink system
Design for adding ink and solvent automatically
Self-monitor when machine works, without personal interference
32 bit embedded CPU, large memory, and the 8.4'' TFT bright clear touch screen
Configure RS232 & USB communication interface, printing with computer
Language alarm function.
Hydraulic System
Compact design
Full automatic viscosity control and pressure control
No external supply of compressed air required
Multiple industry application with reasonable price and economical operation cost
Electronic control system completely separated design from hydraulic system Stable performance, easy operation for
Print Head
Compatible design, maintenance friendly
Automatic ink stream on when start up and ink stream suck back when turn off
Nozzle size: 58 ++ M standard, 52 to 65 ++ M optional
Easily accessible and can be installed in any position
Distance from print head to print surface 1mm~30mm .
Technical specification
Print Lines 1-5 lines (5 x 5 dots)
DOT Matrix figure and letter 5 x 5, 5 x 7, 8 x 10, 8 x 12, 12 x 16, 16 x 16,
24 x 24, and user-defined in 32 x 32
Memory 1000 message, 1000 graphics
Print Speed 1400 character per second (5 x 7 dots)
Letter Height 1-20mm
Operating Interface Chinese, English
Print Objects Chinese & English character, figure, date, time, and
Numbering of reset
Material metal, plastic, glass, wood, turing, electrical wire, cable etc
Font Width up to 9 times
Nozzle Connection Tube 3M
Ink Color black, blue, red etc
Consumption of Ink 70 millions character per litre
Operating Environment 5-45 degree centigrade, below 90%(humidity)
Power Source AC220V / 380V 50Hz 100AV.
Feature
- Quick-dry black ink used industrial non-contact small character inkjet printers
- Print consistently high quality images even on structured and uneven surfaces
- Print features include text, date, time, batch numbers, logo and trademark
- Easy to be integrated at any position of the production line
- User friendly interface and most reliable ink system
- 32 bit embedded CPU, large memory, and the 8.4'' TFT bright clear touch screen
- Configure RS232 and USB communication interface, can upgrade the software.
- Multitask system, printing and editing at the same time.
Applications :
Automobile part, foods, beverages, cosmetics, electronic component, pharmaceutical, stone, wooden, products, eggs, pipes and tubes, cables and wires etc.
Hydraulic system
Full automatic viscosity control and pressure control
Diaphragm pumps with reliability, longer life, low maintenance cost than gear pump
Electronic control system completely separated design from hydraulic system
Print head
- Compatible design, maintenance friendly
- Automatic ink stream on when start up and ink stream suck back when turn off
- Nozzle size: 58 ¼¬m standard, 52 to 65 ¼¬m optional
- Easily accessible and can be installed in any position
- Distance from print head to print surface 1mm~30mm
Technical specification
Print Lines 1-5 lines (5 x 5 dots)
Dot Matrix figure and letter 5 x 5, 5 x 7, 8 x 10, 8 x 12, 12 x 16, 16 x 16, 24 x 24, and user-defined in 32 x 32
Memory 1000 message, 1000 graphics
Print Speed 1,400 character per second (5 x 7 dots)
Letter Height 1-20mm
Operating Interface Chinese, English
Print Objects English character, Arabic number, date, time, batch numbers, and logo, trademark, text
Material metal, plastic, glass, wood, tubing, electrical wire, cable etc
Font Width up to 9 times
Nozzle Connection Tube 3M
Ink Color black, blue,red etc
Consumption of Ink 70 millions character per litre
Operating Environment 5-45 degree centigrade, below 90%(humidity)
Power Source AC220V / 380V 50HZ 100AV.
Compact design and fast installation
- Easy to be integrated at any position of the production line
- Original design, small size and lightweight, equiped with a small table or mounting bracket with the use of production line
- More further environmental protection and energy saving
- Un-contact processing, more environmental protection, lower power, fast laser marked and cost economy
- Easy to use and Excellent compatibility
- Simplicity of operation, easy to use, powerful anti-jamming performance, enough memory, multiply input and output interface, use with automatical anti-counterfeit and anti-disorder system
- Adopt import laser, more safer and faster
Operate Interface
- Configure with laptop
Applications
Food, beverage, tobacco, electronic component, pharmaceuticals, ceramic wares, automobile part, electrical wire, cable, arts and crafts, rubber
Laser
CO2 Metal RF laser
Power: 30W
High-speed, stable performance, adjustable power, applicable to most of nonmetal material
Carve and cut product very convenience, depth could be adjustable
Model C-30B
Refrigerate Style Air-cooled, Water-cooled
Wave length 10.6mm
Line Width 0.02mm
Depth 0.04mm (up to the material)
Industrial Controller Industrial control computer
Print Content Character, logo, barcode, two-dimension code, image, graphics, DOT mosaic
Operating Range Embeded many kinds of laser marked font, automatical serial number, Can be static and dynamic operation, automatic input with time and date change
Information Input Keyboard, USB, serial data communication
Interface Ethernet, USB, RS232
Focus Standard focus 110mm, 70 to 250mm optional
Pipelining Speed 150M per minute
Protection Host optics closed, dust proof
Use Environment: 5-50 centigrade, humidity below 95% Non condensing
Power supply: AC220V 50Hz 1000W
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts.
We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts.
We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts.
We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-OEM remanufactured printer parts.
We have sufficient stock with complete categories, professional technique team.
Our company has built the reputation on pioneering better-than-oem remanufactured printer parts.
We have sufficient stock with complete categories, professional technique team.
Printer specification
Method : Direct thermal or thermal transfer
Resolution : 200DPI
Paper Width : 118 mm
Print Width : 108 mm
Print Speed : 125mm/s
Memory: SDRAMíOo2MB FLASHíOo1MB.
Interface : USB
Bar Code Supported íOo code 3 of 9,UPC-A,UPC-E,interleaved code 25,interleaved code 128, EAN13, EAN8, HBIC(code 39) code25,UPC25,UPC2,UPC5,cUCC/EAN,PDF417,MAXICODE,QR.
Fonts
FONT0 to FONT8, ASD smooth (6 kinds), COURIER(8 kinds).
Character modification
Rotate(0,90,180,270 angles) all fonts can be enlarged 1 to 24 times vertically and horizontally respectively.
Graphic Printing
HEX,PCX,BMP,IMG files downloadable to FLASH,RAM
Media specification
Type: Continuous paper, label, marked paper,shrink tube
Paper roll OD: 127mm(Max.)
Paper roll ID: 25 to 38 mm
Ribbon roll OD: 60mm(Max.)
Ribbon length: 300M(Max.)
Ribbon roll ID: 25mm
Paper eject method: Tear off, peel off
Power requirement
power: power: AC 220V¡¿ñ10%,50/60Hz
Power consumption: 3W
Environment
Operating Temperature: 5 to 45 degrees
Operating Humidity :20 to 80%RH
storage temperature:-40 to 55 degrees
storage humidity: less than 93%RH (Non-condensed,40 degrees)
