25G SR,LR SFP28 optical transceiver with the features of IEEE802.3by, SFF-8472 low consumption and high reliability,suitable for data center,25G Ethernet and fiber channel.
Techwin vector network analyzer for manufacturing wireless device
We will try our best to provide products similar to Keysight like X-series vector network analyzer(MXG, EXG,CXG), Rohde & Schwarz vector network analyzer like R&S FSW Signal and Spectrum Analyzer and R&S FSWP Phase Noise Analyzer and VSO Tester, Tektronix vector network analyzer like RSA5000B Real Time Spectrum Analyzer, Anritsu vector network analyzer like MS2090A Field Master Pro and MS2720T Spectrum Master.
You will probably see us at the following exhibitions: EUMV in Europe , IMS in USA, MWC in Spain, EMV in Germany and so on.
Product Overview:
Techwin TW4650 series vector network analyzer is consist of 10MHz13.5GHz, 10MHzï½?26.5GHz and 10MHzï½?43.5GHz. Techwin TW4650 series reduces cost and enhances price-performance ratio but still maintains the same critical technical specifications with those of high performance instrument, such as sweep speed, dynamic range etc. Techwin TW4650 series offers multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual-port and E-cal. Multiple display types are embedded like logarithm amplitude, linear amplitude, standing-wave, phase, group delay, Smith chart, polar coordinates. Many standard interfaces are available including USB, LAN, GPIB, VGA etc. They can precisely measure characteristics of amplitude-frequency, phase-frequency, and group delay and so on.
Main Features:
Flexible calibration types, compatible with multiple cal kits
Support complicated testing solutions with many windows, multiple channels and fast operation
Multiple display types like logarithm amplitude, linear amplitude, standing-wave ratio, Smith chart etc
With USB, GPIB, LAN and VGA
English operation interfaces, 12.1 inch 1280*800 high-resolution multi-point touch screen
Record/Run, one-button operation simplifies measurement setup and improves working efficiency
Functions:
Flexible calibration types, compatible with multiple calibration kits
Techwin TW4650 series vector network analyzer can give you various calibration types, including guided calibration (auto cal), non-guided calibration (using mechanical cal kits for through response, through response and isolation calibration, single port calibration, enhanced response calibration, full dual-port SOLT calibration, TRL calibration), ECal. Different cal kits can be selected, like coaxial calibration kits or ECal kits, according to actual measurement needs, to make measurement easy for devices of diversified interfaces.
â?¢ Multiple windows display all measurement channels
The analyzer supports up to 64 channels and displays up to 32 measuring windows simultaneously, with up to 16 trace curves displayed in each window at the same time, allowing more visual observation and more convenient operation.
G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.
Features
Be tallied with HART7.0
HART master and Modbus slave mode
4~20mA analog signal overlay HART digital signal
Support 15 HART slave device
Configure gateway by special software
Write protect user data
RS485 Modbus interface
LED power and communication indicating
Standard DIN rail installation
12100 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
M0310 module makes it possible to convert Modbus RTU protocol directly to HART protocol. Using M0310 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to HART protocol. M0310 module is provided with two LED indicating lights, used to indicate the current working status.
Features
Comply with HART PROTOCOL standard V7.0
HART slave station and Modbus master station form
Support 1 Modbus RTU slave device
Support 6 device variables,4 dynamic variables
Configured by HART interface
Write-protection of users data
Support high/low current transfinite alarm
TTL Modbus interface
LED power and communication indicator
MODBUS-RTU master station, comply with MODBUS-RTU protocol
Electrical interface connected with Modbus device supports TTL level
Set MODBUS-RTU slave station via parameters provided by GSD file
Company Information
Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.
Provide FF H1 communication ability to Modbus device
Support standard DD or EDD specification (FF H1)
Electrical interface connected with Modbus device
supports TTL level, RS485 and RS232
G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output.
G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation.
There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure.
SIM: Simulation switch, used for simulation function.
WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random.
RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original.
Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus.
Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.
Product Overview
M0313 module makes it possible to convert Modbus RTU protocol directly to FF H1 protocol. Using M0313 module, the difficulty of development can be reduced and the upgrade of Modbus RTU device can be easily achieved. Only by simply configuration, the users can realize conversion from Modbus RTU protocol to FF protocol. M0313 module is provided with two LED indicating lights, used to indicate the current working status.
Features
Support 1 Modbus RTU slave device
1 RES function block complying to FF specification
1 Modbus transducer block
4 PID function blocks complying to FF specification
4 for each AI,AO,DI,DO function block complying to FF specification, each function block supports 8 channels
Modbus RTU device upgrading
LED working status indicator
Modbus-DP built-in module realizes the connection from Modbus RTU device to PROFIBUS DP network .It realizes the conversion function from MODBUS Protocol to PROFIBUS DP Protocol. Only by simply operating Modbus configuration tool, the users can realize connection from Modbus RTU device to PROFIBUS DP network.
M0306 module works with DIP16 2.54mm standard interface, 3.3 V power supply, Modbus communication indicating light to quick diagnosis the device status. It uses simple convenience
Combining with the features of high reliability and high flexibility, M0306 module is an ideal choice for user to develop OEM devices with PROFIBUS DP protocol.
G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.
Product Description
Provide FF H1 communication ability to HART device
Support standard DD or EDD specification (FF H1)
Electrical interface connected with HART device
Supports FSK(1200bps)
G1013 HART to FF Gateway is 99Ã?22.5Ã?114.5mm, supporting standard DIN rail installation.
G1013 HART to FF Gateway is powered by FF bus, and the HART part shall be with 24V external powered. The recommended is TP cable, and it shall improve devices anti-electromagnetic interference ability.
Vector Network Analyzer for performance measurement
www dot techwin-china dot com
We will try our best to provide products similar to Keysight Vector Network Analyzer, Rohde & Schwarz Vector Network Analyzer, Tektronix Vector Network Analyzer, Anritsu Vector Network Analyzer.
Product Overview:
Techwin Vector Network Analyzer TW4600 has powerful measurement functions, which can complete vector network analysis in the field of wireless communications, cable TV, and automotive electronics, etc. It can be used for performance measurement of filter, amplifier, antenna, cable, and cable television sub connectors, etc. radio frequency components. It adopts Windows operating system; has error calibration and time domain functions; offers multiple display formats such as logarithmic amplitude, linear amplitude, standing-wave ratio (SWR), phase, group delay, Smith chart and poplar coordinates, etc.; provides multiple calibration types: including frequency response, single port, response isolation, enhanced response and full two-port calibrations, rapid SOLT and electrical calibration; has Windows operating platform and LAN function and can display multiple channels; is designed with USB interface, LAN interface, GPIB interface, VGA interface and color LCD display, all of which allow it to quickly and accurately measure the S-parameter amplitude, phase and group delay characteristics of DUT, with efficient and powerful error correction capability.
Main Features:
â?¢ With dynamic range of 125dB, for accurate measurement of high suppression device
â?¢ 10.4 inch true color high-resolution LCD with touch screen function
â?¢ Optional 75â?¦ test port impedance option for cable TV components measurement
â?¢ 0.001dBrms trace noise renders network analyzer higher measuring accuracy
â?¢ With up to 64 independent measuring channels that can implement complex testing schemes quickly
â?¢ Powerful data analysis functions, such as ripple test, bandwidth test and limit test
â?¢ Extendable to 4 ports through port extension set, test the whole 16 parameters of
4-port network through a single connection, capable of balanced parameter test
Typical Applications:
Production test of mobile communication products
The frequency range of Vector Network Analyzer TW4600 can meet the demand of production
test of mobile communication products. It has such features of fast sweep speed, wide dynamic
range and compact size which is very suitable for the test of mass production of factory. The
vector network analyzer can be applied to the test of RF devices, such as filter, power amplifier,
antenna and cables. The 75â?¦ test assembly is also available to characteriz the device of CATV.
BD-ONU-111-Z Series single-user ONU is designed for ONU in deferent FTTH solutions by , The carrier-
class FTTH application provides date service access.
BD-ONU-111-Z series adopts high-performance and low-consumption chips, and supports CTC 2.1
interconnection and interworking standard of China Telecom. With the help of NGBN View NMS, it can
provide subscribers with abundant services, and totally meet the needs of carrier-class FTTH devices.
BD-ONU-111-Z series is designed by ZTE chipset
Functional Feature
Color is optional
Router mode supports PPPoE/DHCP/ static IP
Support port-based rate limitation and bandwidth control
In compliant with IEEE802.3ah Standard
Up to 20KM transmission Distance
Support data encryption, group broadcasting, port Vlan separation, etc.
Support Dynamic Bandwidth Allocation (DBA)
Support ONU auto-discovery/Link detection/remote upgrade of software
Support VLAN division and user separation to avoid broadcast storm
Support broadcasting storm resistance function
Support ACL and SNMP to configure data packet filter flexibly
Specialized design for system breakdown prevention to maintain stable system
Support software online upgrading EMS network management based on SNMP, convenient for
Maintenance
Intelligent 1U4E1PCM30 has 4 E1 ports, 30 channels. All of the 128*128 time slots can be cross-connected flexibly. this function.
Can make 1 E1 of 30 channels of voice data into other 3 E1 ports and merger unsaturated time slots which are from some other E1 ports.
Generally speaking, it makes the single E1 interface card of the county bureau come to 3 E1 interface cards in order to give numbers to sub-branch agencies.
OTS-155B offers various types of traffic interfaces such as PDH, SDH and Fast Ethernet with flexible network configurations of linear, ring, etc. The OTS-155B is also well suited for implementation in customer premises. OTS-155B has been developed as a part of H-OPTEL SDH family products.
PDH fiber optical multiplexer with STM-1 rate, two optical interfaces, which constitute 1+1 mode. The equipment can transmit 8E1 simultaneously, 1 channel 100M Ethernet and 1 NX64K V.35.
The LCD is on the front panel, with the help of the buttons you can operate the network both local and remote equipment. Another way is to manage by the PC.
The equipment has both external alarm input circuit and external alarm output circuit. Output device is relay.
The power supply can both AC220V and DC-48V, and it is available for AC and DC inputs feeding simultaneously which can work with 1+1 protection.
1 channel hotmail.
Sound and light alarm.
There are two module of FOM8E1, FOM8E1A is sold in domestic, which is called OMT240M. The optical card is stable, and the network is through COM, and the sub-rack is gray.
Flexible configuration meet the need of applications foreign abroad. Though it is 19 inches in width and 1U in height, it is different from other PDH which is manufactured by other companies. All of the unit cards are hot swappable. A big quantity of this type exported. Either appearance or performance has good quality.
The sub rack of FOM480 multiplexer is made of aluminum alloy and 19 inches in width, 1U in height. It provides 7 slots for unit card, which consists of 2 optical card slots, 1 8.448M Ethernet card slot and 4 service unit slots. The 4 slots can be deployed with 4¨ª-V.35 card, video card or V.11/V.24 card. So the preparation is flexible, and this feature makes the product a multi-service transport platform (MSTP)
The LCD on the front panel of FOM480 shows the operation and alarming status of both local and remote equipment. We and connect the equipment with the PC directly to operate the network management.
The SNMP protocol through Ethernet interface provides the first management system. So you can through the web to operate the network, and when you are on holiday you can also operate the network in the hotel. If you are online and enable the management through Internet on web interface.
The optical interface code rate is 155Mbit/s, so the 100Mbit/s Ethernet is as fast as the MODEM.
The power supply can both AC220V and DC-48V, and it is available for AC and DC inputs feeding simultaneously which can work with 1+1 protection.
The optical interfaces works under 1+1 mode and providing smooth switching which costs 0ms when either the optical card is plugged out or the fiber damaged or cut. And there's no error bit or AIS occurred during the switching. This achieves the real non-damage switching, the most advanced and unique technique of FOM480. The test between some manufactures in the Thailand which can past this test is only one or two.
TRX E1-10/100Base-T developed by Hengguang Technologies, employs the clarity E1 transmission channel in accordance with ITU-T G.703 advice and IEEE802.3 standard with independent intellectual property. It is a kind of remote transmission equipment transmitting 10 Base-T data. With an independent structure, TRXE1-10Base-T can transmit 10Base-T data through E1 channels and extend work distance of the interface between two Ethernets through E1 channels such as optical fiber, microwave DDN nets and so on.
It can use the existing communication network structures and interfaces efficiently without impropriating optical fiber core or additional equipment.
12100 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
