Based on w-cdma and can be compatible with gsm networks
Can connect to phone, pbx, voip, ip-pbx , billing meter and etc.
Support connecting with internet through usb line and can surf the internet wirelessy. The pc computer can send and receive text messages by its connection
Can lock sim card
Support caller id with dtmf/fsk
Dtmf and pulse dialing
Support sms
Reversal polarity signal supported for billing charging
Making and answering calls after connecting to telephone set
2rj-11 ports can support connect with extension
Real time displaying of wireless network signal strenght
Technique parameters
Multimode operation ¿chsupa/hsdpa/umts/edge/gprs/gsm
Triple-band hsdpa/umts 850/1900/2100 mhz
Quad-band edge/gprs/gsm 850/900/1800/1900 mhz
Hsupa uplink up to 2.0 mbps
Hsdpa downlink up to 7.2 mbps
Wcdma (umts) uplink data rate up to 384 kbps
Edge data up to 237 kbps dl and 118kbps ul, 3gpp release4, class 12
Gprs data up to 85.6 kbps dl and 42.8 kbps ul
Power supply: dc12 v
Output power:
Class 3 for umts/hsdpa/hsupa
Class 4 for gsm 900
Class 1 for gsm 1800
Class e2 for edge 900/1800
Usb: usb 2.0 full speed
Antenna interface:
Antenna gainú¦ >1.5dbm
Sensitivity: < -104 dbm
Antenna transimission power: < 3 w
Working environment ú¦
Operating temperature: -10 ~ +55íµ
Storage temperature: -40 ~ +80íµ
Atmosphere pressure:86-106kpa
Environment noise:ú+60db
Rj-11 phone interfaceú¦
On hook voltage: 45v
Off hook current: 30ma/41ma
Dialing tone frequency : 450hz
Optical node YDON-200
Detail: Features
2 Stage GaAs type amplifier SCTE
Complete mechanical and electrical performance for high reliability and low noise
Small rigid zine die cast housing is strong and easy to mount
Very low power consumption
Operating voltage of 12-15V(DC)
Two -20dB monitor ports for output and input test
LED indicators for optical Input, laser output, and DC power on
UL approved power adaptor SC/APC or FC/APC optical connectors.
Product Description Cisco Supervisor Engine 720 with PFC3B - control processor
Features: Layer 3 switching, Layer 2 switching, MPLS support, IGMP snooping, IPv6 support
Dimensions (WxDxH) 37.9 cm x 40.3 cm x 4 cm
RAM Installed (Max) 512 MB (1 GB)
OS Required Cisco IOS 12.2(17d)SXB1
Device Type Control processor
Enclosure Type Plug-in module
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Flash Memory Installed (Max) 64 MB Flash.
12175 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
General features :Tri-Band GSM/GPRS 900/1800/1900MHz(SIM300C)
Quad-Band GSM/GPRS 850/900/1800/1900MHz
(SIM340C)
Dimensions: 50mm x 33mm x 6.2mm
DIP type board-to-board connector suit for vehicle .
Application: 1:Vehicle carries and ship carries security monitoring machine
2:Long-distance monitor
3:Data acquisition
4:The wireless water, the electricity, the gas copy.
*ú+eb Server Build into IPCam
*32-Bit RISC CPU inside
*Network Protoal: Http, TCP/IP, UDP, SMTP, PPPOE, DDNS, DNS, SNTP, BOOTP, DHCP, FTP, SNMP
*Support Internet Plug And Play
*Picture Format: 160x120, 320x240, 640x480, Up to 5-30fps ú+VGA (640X480)
*Focus Distance: 8cm To Infinity, Manually Adjustable Focus Lens
*Auto Control For White Balance, Exposure, Color/Brightness
*IEEE802.11 B/G standard compliant,Support of 64/128-bit WEP encryption and WPA2.
1 input 8 output HDMI splitter is the latest 1.3 version splitter. The splitter can transform a HDMI input signal
into eight identical HDMI output signal simultaneously, the splitter has the function of buffer and amplifying,
so through series connectionú¼ it can achieve long distance transmission of HDMI signal of more than 15
meters. When two or more are stacked together, they can be used to create a larger distribution. The series of
products are divided into Mini1 to 2, Mini1 to 3, Mini1 to 4, 1 to 4, and 1 to 8. Meanwhile it can be cascaded
series level 4.
It offers solutions for the following occasions: the retail and show site of HDTV, STB, DVD and Projector, as
well as the testing environment of producing factory; data center control, information distribution, conference
room presentation, school and corporate training environments, the occasion of noise, space and security
concerns.
1. We provide very good quality. As said before, we only sell brand new, sealed products.
2. We offer professional consultancy. Actually, we sometimes even help our si partners to revise their bom, for larger projects, based on our experienced technical sources.
3. We understand the si life and pain, that we usually concede in product or service price to our utmost, that may help you be more competitive.
4. You can even outsource the project to us, that lower your cost, but still saves your brand.
UTP CAT5E
Network Cable
Up to 100MHz
TIA/EIA-568B
100í+15ª+
DESCRIPTION:
24AWG Bare solid copper conductor,PE insulation,4 pair ,ROHS complied PVC, PE or LSOH jacket Complies to TIA/EIA-568B&ISO/IEC 11801
APPLICATION:
10 base T, ATM, Ethernet, token ring, TP-PMD audio, telephone and multimedia networks. CONSTRUCTION:
CONDUCTOR 24AWG Solid Annealed Copper wire.
INSULATION PE.
TWISTED PAIRS Insulated Conductors twisted into pairs.
Varying lay length is designed to minimize the cross talk and capacitance unbalance.
CABLE CORE Up to 25 pairs.
JACKET PE or PVC or LSOH.
IDENTIFICATION
&
LENGTH MARKING Manufacturer's identification, Cable type, conductor size, year of manufacture are marked on jacket at one meter intervals
(Can be also as per customerí»s request)
22awg bare solid copper conductor, pe insulation, 4 pair , rohs complied pvc, pe or lsoh jacket complies to tia/eia-568b&iso/iec 11801
Application:
10 base t, atm, ethernet, token ring, tp-pmd audio, telephone and multimedia networks. Construction:
Conductor 22awg solid annealed copper wire.
Insulation Pe.
Twisted pairs Insulated conductors twisted into pairs.
Varying lay length is designed to minimize the cross talk and capacitance unbalance.
Cable core 4 pairs.
Jacket Pe or pvc or lsoh.
Identification
&
Length marking Manufacturer's identification, cable type, conductor size, year of manufacture are marked on jacket at one meter intervals
(can be also as per customerí»s request)
Twisted pair cable with solid polythene insulated copper conductor, jelly filled or no jelly filled, polyester coated aluminum tape (pap) longitudinally wrapped, pe sheathed self-supporting local communication cable
Application:
This cables is ideal for long distance and interoffice communication for aerial installation.
Construction:
Conductor Solid annealed copper wire, sizes: 0.4 mm to 0.9 mm.
Insulation Pe, color code in accordance with standard telephony industry code.
Twisted pairs Insulated conductors twisted into pairs.
Varying lay length is designed to minimize the cross talk and capacitance unbalance.
Cable core 10 or 25 pairs are stranded to form a group called unit.
Units/super units make up cables of 50 pairs and above.
Core wrap A non-hygroscopic and dielectric polyester tape is applied helically with a suitable overlap.
Screen Electrically continuous 0.2 mm thick aluminium tape coated with co-polymer on both sides applied longitudinally and overlapped to form a moisture barrier.
Suspension
Strand 7 extra high strength of galvanized steel wires strand together to form the suspension strand.
Jacket Black ldpe
Identification
Length marking Manufacturer's identification, cable type, conductor size, year of manufacture are marked on jacket at one meter intervals
(can be also as per customerí»s request)
Description:
Twisted pair cable with solid /foam skin polythene insulated copper conductor, lap sheathed ( laminated aluminium shield polyethylene sheathed ) cable for local communication.
Application:
Lap cable is designed for telephone exchange area and trunk line.
Construction:
Conductor Solid annealed copper wire, sizes: 0.4 mm to 0.9 mm.
Insulation Pe, color code in accordance with standard telephony industry code.
Twisted pairs Insulated conductors twisted into pairs.
Varying lay length is designed to minimize the cross talk and capacitance unbalance.
Cable core 10 or 25 pairs are stranded to form a group called unit.
Units/super units make up cables of 50 pairs and above.
Core wrap Non-hygroscopic dielectric tape applied hellically or longitudinally over cable core fully filled with filling compound.
Screen Electrically continuous 0.2 mm thick aluminium tape coated with co-polymer on both sides applied longitudinally and overlapped to form a moisture barrier.
Jacket Black ldpe
Identification
&
Length marking Manufacturer's identification, cable type, conductor size, year of manufacture are marked on jacket at one meter intervals
(can be also as per customerí»s request)
Description:
24awg bare solid copper conductor, pe insulation, up to 25 pairs , rohs complied pvc, pe or lsoh jacket complies to tia/eia-568b&iso/iec 11801
Application:
10 base t, atm, ethernet, token ring, tp-pmd audio, telephone and multimedia networks. Construction:
Conductor 24awg solid annealed copper wire.
Insulation Pe.
Twisted pairs Insulated conductors twisted into pairs.
Varying lay length is designed to minimize the cross talk and capacitance unbalance.
Cable core Up to 25 pairs.
Jacket Pe or pvc or lsoh.
Identification
&
Length marking Manufacturer's identification, cable type, conductor size, year of manufacture are marked on jacket at one meter intervals
(can be also as per customerí»s request)
Feature:
1. Comply with ansi/eia;rs-310-d;din41491;iec297-2;din41494; part7; gb/t3047.2-92 standard; compatible with 19í¦ international standard, metric system and etsi standard.
2. Reliable structure, static loading capacity:500kg(optional castors and plinth)
3. Adjustable feet and castors are available, moving conveniently, and fixing reliable.
4. Baying together easy, quickly efficiently and firmly.
5. International popular tempered glass front door, steel rear door.
6. Optional cable entry on top cover and bottom panel, removable front&rear door and side panel facility, ventilation and rat-proof on the bottom.
7. Varies optional accessories, reliable quality.
8. Optional opening hole and varies specification upon customers' special requirements.
