GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.2Gbps Wavelength 1310nm
Max Cable Distance 10km at Single Mode Fiber Connector Single MPO
Transmitter Type DFB Laser Array Extinction Ratio 3.5dB
Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm
Max Cable Distance 10km link length Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Compatible Cisco Form Factor QSFP+
Max Data Rate 10.5Gbps Wavelength 850nm
Max Cable Distance 150m on OM4 MMF Connector MTP/MPO
Transmitter Type VCSEL 850nm Extinction Ratio 4dB
Media MMF Power Consumption < 1.5W
Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
GLsun QSFP28-100G-LR4 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four electric-absorption modulated lasers (DMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
Compatible Cisco Form Factor QSFP28
Max Data Rate 28Gbps data rate per wavelength Wavelength 1310nm
Max Cable Distance 10km link length Connector Duplex LC
Transmitter Type LAN WDM DML Extinction Ratio 4dB
Media SMF Power Consumption
12164 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.
Application
Applicable for the FTTH project and provide mechanical protection for a fiber management system that includes the functions of splicing, patching, and passive component integration.
â? Rated to IP55, suitable for indoor or outdoor application.
Features
Easy to install and connect.
Available for standard SC, or LC-Duplex adapters.
Available for 1x4 or 1x8 PLC splitter.
The fiber bend radius in the box is more than 30mm.
Open ports for easy cable installation.
Perfect fiber management - Clear fiber function division and fiberting.
Reliable cables fixed device (including outputs).
Available for both Wall-mount and Pole-mount.
A Load Balance Router. It offers 8* Gigabit Ethernet interfaces and 2*Gigabit SFP fiber ports for loading balance with the industrial design. All GE Ports are changeable for WAN/LAN mode and is easy to provide the VPN access for the enterprise private network.
Hardware Specifications
8* 10/100/1000 Mbps Ethernet ports
2*100/1000 Mbps SFP optical ports
1*console port
1*USB port
1* FUNC button
1* 3 standard core power interface
Dimension:c271mm*154mm*34mm
·Structure design: the high-duty metal case
Power consumption: â?¤18W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 10 95%RH
Store temperature: -20+75C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
Multi-WAN Function
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
(VPN optional, GRE over IPSec, IPsec over L2TP.)
802.1Q VLAN and QinQ
Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly)
Log function
Wavetel 5G WiFi 6 CPE W4300S supports 5G NR(NSA&SA), LTE and WCDMA networks and is designed to deliver high-speed and low-latency wireless access to the residential and small businesses. W4300S has three 1Gigabit Ethernet ports and it supports dual-band WiFi6.
Hardware Interface
2* Gigabit Ethernet LAN
1* Gigabit Ethernet LAN/WAN
·Dual Band WiFi: 2.4GHz + 5GHz
A Load Balance Router. It offers 5 Gigabit Ethernet interfaces and 1 Gigabit SFP fiber ports for loading balance service with the industrial design. All GE Ports are changeable for WAN/LAN mode.
Hardware Specifications:
5 10/100/1000 Mbps Ethernet ports
1 100/1000 Mbps SFP optical ports
1 FUNC button
1 3 standard core power interface
Dimension: 179mm 135mm 34mm
Structure design: the high-duty metal case
Power consumption: 24W
Input: DC12V/2A
Operating temperature: -40+85C
Operating humidity: 1095%RH
Store temperature: -40+85C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
Multi-WAN Function
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
(VPN optional, GRE over IPSec, IPsec over L2TP.)
802.1Q VLAN and QinQ
Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly)
Log function
A Cellular Eth Router. It supports 1*1000Mbps SFP interfaces and 5*1000Mbps Ethernet interfaces, WIFI N, LTE network access, and WIFI N, designed for the industrial and enterprise scenario. It provides rich enterprise communications services, especially LTE+SFP Fiber+Ethernet Load Balancing and Failover. Moreover, it supports two sim slots for sim fail over and two power interafce for power fail over.
Hardware Specifications:
5* 10/100/1000Mbps Ethernet ports
1* 100/1000Mbps SFP optical port
2* SIM card slot
2* 4G antenna
2* WIFI antenna
1* FUNC button
A Cellular Eth Router. It supports 1*1000Mbps SFP interfaces and 5*1000Mbps Ethernet interfaces, WIFI N, LTE network access, and WIFI N, designed for the industrial and enterprise scenario. It provides rich enterprise communications services, especially LTE+SFP Fiber+Ethernet Load Balancing and LTE Failover
Hardware Specifications:
5* 10/100/1000Mbps Ethernet ports
1* 100/1000Mbps SFP optical port
1* SIM card slot
2* 4G antenna
2* WIFI antenna
1* FUNC button
1* GPS antenna(optional)
1*USB Port
1* 3 standard core power interface
4G/3G/2G access The frequency bands could be customized
WIFI module: 802.11 b/g/n, 300Mbps dual channelDimension: 179mm*135mm*34mm
Structure design: the high-duty metal case
Power consumption: 15W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 10 95%RH
Store temperature: -40+85C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
�·Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
�·Multi-WAN Function
LTE+SFP Fiber+Ethernet Load Balancing
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
A Cellular Eth Router. It supports 2*100Mbps Ethernet interfaces, 1*RS232/RS485 serial port, LTE network access with Dual SIM slots for the failover, designed for the industrial. The configurable serial port transmits the narrow-band data from the machine, and the Modbus feature supports RTU converts to TCP easily.
Hardware Specifications:
2* 10/100Mbps Ethernet ports
2* SIM card slot (backup/failover)
2* 4G antenna
1* FUNC button
1* GPS antenna(optional)
1* 3 standard core power interface
4G/3G/2G access The frequency bands could be customized
Dimension: 179mm*135mm*34mm
Structure design: the high-duty metal case
Power consumption: 24W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 10 95%RH
Store temperature: -40+85C
Installation: desktop, wall-mounted, slideway
Key features:
Various network protocols: TCP/IP, UDP, HTTP, TELNET, ICMP, DHCP, PPPoE, DNS etc.
Port setting: Port Mirroring, Flow Statistics, LAN and WAN Port Setting
Multi-WAN Function
LTE+SFP Fiber+Ethernet Load Balancing
WAN Load Balancing: Bandwidth Occupancy, WAN IP Tracing
WAN Bandwidth Percentage Display
LAN IP Statistics
Detecting Online: ICMP Detecting, ICMP Detecting
Static routing and dynamic routing of RIP/OSPF/BGP
PWE3, VPLS, L3 VPN
QoS: packets priority, traffic policing, traffic shaping,rate-limiting
Centralized network management of CLI, WEB and SNMP
NAT function
ACL function
Firewall, packet filtering etc
VPN functions: GRE, L2TP VPN, IPSec VPN, EOIP VPN, MPLS VPN etc.
(VPN optional, GRE over IPSec, IPsec over L2TP.)
802.1Q VLAN and QinQ
Link detective functions such as BFD, DLDP(switch to backup link according to detective result quickly)
Log function
W4600-NR is a 5G Cellular Eth Router for the enterprise and M2M scenario. It supports 1*1000Mbps SFP interfaces and 5*1000Mbps Ethernet interfaces, WIFI b/g/n and Cellular(2/3/4/5G) network access. It provides rich industrial features and enterprise communications services, especially like Load balance, OSFP, IPSEC features with high performance and easy management.
Hardware:
5* 10/100/1000Mbps Ethernet ports
1* 100/1000Mbps SFP optical port
2* SIM card slot
4* Cellular antenna
2* WIFI antenna
1* FUNC button
1*USB Port
1* 3 standard core power interface
Cellular:
5G
NSA&SA
Bands: N41/N78/N79
4G
Bands: B1/B3/B5/B8/B38/B39/B40/B41
3G
Bands: B1/B8
2G
Bands: B3/B8
(Please contact us for more frequency bands combinations)
Whilte/Black List
QoS
Management
CLI, WEB, SNMP, TR069
Environmental:
Dimension: 181mm*134mm*31mm
Structure design: the high-duty metal case
Power consumption: 15W
Input: DC12V/1.5A
Operating temperature: -40+85C
Operating humidity: 10 95%RH
Store temperature: -40 +85 C
Installation: desktop, wall-mounted, Din-Rail
Static IP address, PPPoE, DHCP
PnP: Auto detection-line,upgrade
QoS: Destination/Source MAC/IP, Application, DSCP
Advanced Routing: Static Route, Policy Route, DNS Proxy,
Port Forwarding/Triggering
Internal Address Management: DHCP Server, IP and MAC Address Bind,
WIFI Features
IEEE 802.11b/g/n (2.4Ghz) and 801.11 AC (5.8Ghz)
Security: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK
WIFI Features:WMM, WLAN-LAN Isolation, Multi SSID(X4), AP Isolation
Antenna Type: 2R2T WiFi b/g/n and 2R2T WiFi AC
Voice Features
2*FXS Port G.711Alaw, G711mulaw, G.723, G.729
