Pressure vessel-- sealing equipment which is used to contain gas or liquid, and bear certain pressure. It can be divided into storage vessel, reaction vessel, heat-exchange vessel, separation vessel and etc. Our company can produce all kinds of categories of two and three pressure vessel, and now we mainly produce quick opening door reaction vessel, it is widely used in building material industry and chemical industry.
Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.
An open loop system is for climates where there is no risk of freezing. Recirculation freeze protection can be provided by the recirculation feature in the controller. An open loop water heating system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems.
Features:
1) Many designs and colors available (over 200 kinds)
2) Includes solid color series, wood grain series, marble and granite series, lightness series, and metal series
3) Surface finish: Glossy, matt, nicety texture, and bold texture
4) Sizes: 1, 220 x 2, 440mm,
1220x3050mm,1300x2800mm,1300x3050mm,1310x3090mm,1525x3660mm,
5) Thickness: 0.5 - 25mm
Product Name: High Pressure Laminate
Place of Origin: China
Features:
1) Finished via impregnating the decorative paper & kraft paper in melamine, drying and high temperature and pressure
2) Outstanding resistance to abrasion, high temperature, dirty, shocking, cigarette ignition and open flame
3) Exceptional mould-proof performance, has very wide application and very big market potential
4) Can be used as surface decorative material for indoor and outdoor
Specifications:
1) Size: 4 x 8' (1, 220 x 2, 440mm),4x10'(1220x3050mm),4.3x9'(1300x2800mm),4.3x10'(1300x3050/3090mm), 5 x 12' (1, 525 x 3, 660mm)
2) Thickness: 0.5-25mm
3) Texture: Glossy, supermat (quarry), velour, or according to customers' requirements
4) Colors:plain color, Solid color,mettalic brushed ,lightness, variegation, woodgrain
Packing:
300pcs/palletized wood case, or according to customers' special requirements
1. Uni-directional heat transmission
2. Can start from lower temperature
3. Faster transmission
4. Lower heat capacity
5. Low temperature resistance
6. Freeze-proofing
7. High frequency soldering inner tank
8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system
9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,
10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
Skylight compact pressurized solar water heater takes advantage of the vacuum tubes which has the property of high absorptivity and low emissivity, and transfer swiftly the heat absorbed to the water by heat pipe inside the vacuum tubes.This kind of solar water heater can operate efficiently from summer to winter, and afraid not the frost cleft of the vacuum tubes.
1. Uni-directional heat transmission
2. Can start from lower temperature
3. Faster transmission
4. Lower heat capacity
5. Low temperature resistance
6. Freeze-proofing
7. High frequency soldering inner tank
8. Rating pressure is 0.6mpaú¼0.4mpa separately, can connect directly with the city water system
9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,
10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes,
Thermosyphon solar water heater relies on the natural circulation of water between the collector and the tank or heat exchanger. As water in the vacuum tubes is heated it rises naturally into the tank, while cooler water in the tank flows down to the bottom of the vacuum tubes, causing circulation throughout the system.
Technical specificationa
*Both of inner and outside water tank shell are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable.
*Heat insulation of water tanks adopts polyurethane foam, thickness is 55mm.
*Silicon rings to connect and seal them.
*The tubes and supports are adjustable, power bearing is average, and can assure the vacuum tubes to use for long time.
*Whole glass vacuum tubes adopt super hard borax and silica glass.
*Absorb rate:=93%, thermal radiation rate:=6%(100 íµ)
*Resist 25mm hail, using life can last 15 years.
*Temperature when exposed to sun without water:250íµ, 2.5hours to boiling if using single tube.
*If you use electrical appliances to aid heating, to switch off the power supple before boiling.
*To test the water temperature before using, in order to avoid scalding.
Homogenizing Machine is a kind of versatile equipment which can make liquid substance into homogeneous thin.
1. Apply for drink and food industry such as milk, yogurt, ice cream, kechup and so on.
2. Apply for cosmetic, lipstick, skin cream, shampoo and so on.
3. Apply for medicine, dye, additives, grease.
4. It could be used for high pressure transfer pump to dryer sprayer.
Working principle of high pressure homogenizer equipment
Pressure through an adjustable current-limiting gap process, the formation of loss of pressure expansion, explosion, shear, combined effect of high-speed collision, the particles and liquid droplets shatter into very small size, while creating an ideal solution or dispersion of emulsion. Product stability, consistency, mixed, and easy absorption, nutritional value, shelf life, flavor, color, security activities are realized in the homogeneous process. Industrial homogenizer is widely used in food, dairy, beverage, pharmaceutical, fine chemicals and bio-technology and other fields of production, scientific research and technological development.
This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller.
This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water.
The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system.
Solar heating system
1) once heat-exchange system
2)twice heat-exchange system ( single copper coil )
3) twice heat-exchange system ( double copper coil )
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
High precision ,good brightness and no oxidize residual substance in inner and outer surface and could withstand high pressure ,no deformation after cold bending , no crack and break after flattening and flaring,with good mechanical property and no deformation after bending at any angle.
1. Bundle packing
2. Pack in heavy tri-wall boxes
3. Plian end or varnished as per buyers requestments
4. Wrapped in waterproof paper
5. Sackcloth with several steel strips
