Model Chemical Composition% Core wire diameter (mm) Wire weight (g/m) Feed speed (m/min) Treatment temperature() Re Mg Si Ca Ba Sb BN-401 - - 55-60 28-30 - - 13 230 50-100 1600 BN-402 2-4 27-30 40-45 4-5 - - 13 230 15-25 1460-1500 BN-403 4-5 27-30 40-45 3-4 - 3-4 13 235 15-25 1460-1500 BN-404 20-24 5-6 38-42 0.5-2 1-2 - 13 240 15-25 1460-1500 BN-405 - - 55-65 2-4 6-8 - 13 260 12-18 1350-1440 Packing: Horizontal or Vertical type on steel/wooden pallet. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Assay of Oxidizable elements and microelements can be adjusted and controlled by using cored wire. It can help to improve the alloy yield,reduce smelting cost, shorten smelting time and control composition precisely. 2.It can purify the molten steel and partly change steel inclusion morphology and properties, improving molten steel quality and casting state. 3.The equipment for cored wire injection is simpleï¼?leading to small occupation area. Application 1.It is used to steel-making and foundry industries. 2.It can purify steel inclusion morphology, improve castability of molten steel and usablity of steel. It can obviously improve the alloy yield, reduce the alloy consumption and gain remarkable economic benefits.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Assay of Oxidizable elements and microelements can be adjusted and controlled by using cored wire. It can help to improve the alloy yield,reduce smelting cost, shorten smelting time and control composition precisely. 2.It can purify the molten steel and partly change steel inclusion morphology and properties, improving molten steel quality and casting state. 3.The equipment for cored wire injection is simpleï¼?leading to small occupation area.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Physical and chemical property: Appearance: Clear Liquid Ionic properties: Non-ionic Active content: 100% Product characteristics: Soluble in cold and warm water Super alkali-resistant and acid-resistant Low foaming after temperature up to 70 High concentration detergent with dispersing and emulsifying properties Non-toxic to enzymes, high surface activity Usage Method: Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l Using 2-3g/L oxalic acid to get excellent washing effect for polyester Package And Storage 200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Active content: 42 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric; Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow viscous liquid Ionicity: Cationic pH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 85 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantage This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
HYDROPHILIC SILICONE EMULSION DL3111 Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 53 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90-100 resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
.Material: special european imported environmental protection plastic. 2.High precision injection molding screw; stable injection; accuracy error is only 2% 3.Min. Dosage 1u, dosage adjustable from 1u~60u. 4.Safe bi-directional dosage adjustment. Device reset automatically while injection finishes. 5.Suitable for both injection needles and injection pens, easy to replace. 6.Suitable for 3 ml card bottle potting medicine liquid injection 7.Can be used over 2 years. Easy operation.
