Vibrant Screener Rotary Screener High Efficiency Double Shaft Mixer Vibrant screener can screen different sizes of pellet. Good effect of screen Screener body adopt self -balanced vibrant method,  install vibrant motor on each side of screener, two motors rotation reverse respectively to offset the vibration on horizontal level, and double the vibration on vertical direction, to ensure the normal movement of screener body, good effect of screening, small occupation, stable movement, widely used. Humanization design It can customized into single layer, double layers, or triple layers structure. We welcome you to contact with us for more details.
Crumbler machine used for crushing big pellet into small pellet High Efficiency Double Shaft Mixer Vibrant Screener This machine is exclusively used for crushing big pellet into small pellet. Compact structure, double or triple roller crumbler are optional, in-feeding are continous and stable, finished particles are even, the paticle size are adjustable. Roller are running by different speed, pellet are pressed, cut and tore between rollers, and good effect for crushing. limit switch will stop machine operation when particles by-pass flow; Adopt narrow V belt driving, stable drive, low noise, reliable operation, convenience for running. Below are models of Crumbler for choosing: Model Capacity(T/H) Power (kw) roller size noise for idle run
Product Description High speed injection molding machine There are XDLseries for our plastic injection machinery, and due to different fucntions, it could be divided into five kinds, that is standard injection machine, synchronized injection machine, injection machine with servo motor, injection machine with variable pump, high speed injection machine. We also could design and make machine according to the customers' requests. Features * Higher Productivity * Low Power Consumption * Precision & Consistency * Robust Construction Some of the important features: Clamping system: Faster response, stable and high rigidity Injection system: Accurate and flexible, lower rejection rate Control system: Computer and simple operation, molding data memory system Power system: Energy saving, high efficient and precise Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company. Other Information Ceramic heating loop: Uniform heating, better thermal insulation properties so good for production Visiable lubrication system: On time clean, avoid cast steel parts abrasion and broken. Oil treasure: Filter of hydraulic oil, good for pump and valves Long working life: Imported spare parts and updated version
Product Description 15KG  2.7KW  plastic hopper dryer with hot wind style 1. New generation of standard hot air dryer, improved functions as to be more environment concern; 2. Energy saving. Decreasing heat lost by recycling, save electricity greatly; 3. Improved efficiency concentration of thermal energy, dehumidification facilities able to expel moisture rapidly, speed drying; 4. Environment cleaning. Airtight design, able to filter out powder material during drying circle, eliminate contamination,decrease high temperature of working environment brought by drying; 5. Special filter to withstand 150 degree high temperature blower assuring safe operation.
Name:upvc butterfly valve injection mould Mould base: 45#, 50#, LKM, ect. Mould life: 300,000~1,000,000 shots Design software: UG, Pr/E, Solid works,CAD Mould Steel: P20,P40, KP4,NAK80,718,2316,SKD61,etc. Processing Equipment:CNC milling, CNC lathe, wire EDM, Engraving machine, Grinding Machine, etc.
Plastic Ram Extruder  Machine For PTFE Rod(Φ80-150mm) This PTFE extruder is able to extrude rod which dia from 80mm to 150mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service.We can solve various problems to improve the equipment efficiency for you.Ram extrusion machine for Teflon rod The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 80 to 150 mm, Heating zones 5 zones The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 80mm-150mm Technical Data Description Model No. Machine model PFB-150 Plastic Extruder PTFE Rod Power 33 kw Min - Max Dia 80-150 mm Tolerance 1-2mm+ Length Unlimited Production Per Hour 8-16kg Electricity Consumption Per hour 2.5 kw Weight of the Machine 1220 kg High of the Machine 1680mm Floor area of the Machine 1.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days -
Teflon ptfe extruder Plastic ram extruder machine features: 1, automatic control 2, easy to operate 3, low power consumption 4, product size stability 5, precise sintering 6, environment-friendly and energy-saving Application: Ptfe ram screw extruder products tube, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the tube has a wide range of applications Model no. Machine model pfb-80 Plastic extruder Ptfe Power 20 kw Min - max dia 25-80 mm Tolerance 0.5-2 mm Length Unlimited Production per hour 7kg Electricity consumption per hour 2.5 kw Weight of the machine 960 kg High of the machine 1560 mm Floor area of the machine 1.2 m2 Warrenty for parts 1 year Machine gurantee period 1 year Free spares 1 set Deliver lt 30 days About us: Changzhou sunkoo machine tech co., ltd Professional experience: 10+ years only in the field of the ptfe extruder Manufacturing capacity: 50 sets / year. Technology strength: have a professional and experienced designer team to meet your any requirement Model ptfe series is a single screw extruder for extruding dia lower 150mm rod and dia lower 500mm tube. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Hot tags:teflon ptfe rod;teflon ptfe tube, teflon ptfe extrusion -
Extruded Plastic Teflon PTFE Tube Extrusion line (Φ150-300mm) PTFE ram extruder line is able to extrude ptfe/Teflon tube which dia from 150mm to 300mm. The automatic production line is computerize controll, which is really easy to operate. Meanwhile, the plastic Teflon extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. The extrusion machine had has continue improved in past 10 years with high quality and stable operation. PTFE machine Ram extrusion machine for Teflon PTFE Tube The China vertical PTFE RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China tube ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE Molded powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 150 to 300 mm, Heating zones 5 zones The complete electrical control is laterally fastened at tube ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. 4-6 temperature regulators are contained in the plant, four for the extruding ptfe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE tube diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Tube Extruder Dia 150mm-300mm Technical Data of PTFE machine Description Model No. Machine model PFG-300 Plastic Extruder PTFE Tube Power 25 kw Min - Max Dia 150-300 mm Tolerance 0.1-0.2mm Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 1.5 kw Weight of the Machine 1980 kg High of the Machine 2960 mm Floor area of the Machine 4.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days
Plastic Teflon PTFE Rod Extruder Machine For PTFE Rod( 4-20mm) This PTFE extruder is able to extrude rod which dia from 4mm to 20mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Ram extrusion machine for Teflon rod The China vertical RAM Extruder Machine is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6 zones.The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 4mm-20mm Technical Data Description Model No. Machine model PFLB-20 Plastic Extruder PTFE Power 12 kw Min - Max Dia 4-20 mm Tolerance 0-0.2mm+ Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 2 kw Weight of the Machine 930 kg High of the Machine 2150 mm Floor area of the Machine 3.5 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 s Deliver LT 30 Days Features 1, Automatic control 2, Easy to operate 3, Low power consumption 4, Product size stability 5, Precise sintering 6, Environment-friendly and Energy-saving Application: PTFE RAM Screw Extruder products rod, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the rod has a wide range of applications
Technical features: 1. Hydraulic / pneumatic cylinder is built-in. No need for extra cylinders. 2. Aluminum alloy chuck body, light-weighted, good heat dispensation. 3. Clamping precision: 0.03-0.05mm 4. Allows non-stop operation when loading parts. 5. Simple structure, high efficiency, low cost, convenient installation. 6. Widely applied to convert manual lathe into powered ones. 7. Widely applied to build special purpose machines. 8. Do not spray cutting fluid to the chuck directly. 9. The Besides O.D. chucking, customer can easily convert a JA7-44/JH7-44 rotary power chuck into a I.D. expanding chuck by installing an expanding kit including a push-nut, a mandrel, and a expading sleeve. 10. The expanding sleeve is designed and made according to customer's requirement.
Technical features: 1. Thru-hole, high speed 2. Super short form, light weight. 3. Built-in safety check valves and pressure relief valve
Technical features: 1. The rotary valve and cylinder body, all made of special light alloy, are light-weight. 2. Through unique design, efficebtly increase its utilization. 3. Built-in safety check valves.
Technical features: 1. The rotary valve and cylinder body, all made of special light alloy, are light-weight. 2. Through unique design, efficebtly increase its utilization. 3. Built-in safety check valves.
Technical features: 1. High speed. 2. Compact & Lightweight. 3. Thru-hole Capacity. 4. Built-in Safety Check Valves which prevents the internal pressure from sudden declining so that the workpiece will not fly out and cause a serious accident. 5. Easy for Heat Dissapation.
Place of Origin: Jiangsu, China (Mainland) Brand Name: IVY pneumatic chucks hard jaws Model Number: HJ08 hard jaws (chuck jaw) Power: Hydraulic Number of Jaws: 3 Item of hard jaw: HJ08 Hrdraulic Lathe Power Chuck Hard Jaw used on CNC Machine Color of chuck hard Jaws: Slivery hard lathe chucks jaws Material of lathe chucks hard Jaws: Advanced Alloy Steel cnc lathes oil chucks jaws Appilcation of Hard Jaws: Machining Workpiece of Special Hardness
Technical features: 1. Aluminum alloy, light weight, good heat dissipation, effectively reduce the temperature. 2. Powered by Hydraulic. 3. Clamping precision: 0.03-0.05mm 4. Can easily replace the vice jaws to improve accuracy 5. Simple structure, high efficiency, low cost, convenient installation. 6. Lever or Foot Pedal Actuated. 7. Low Maintenance with Oil Mist Lubrication System
Feature of spindle collet chuck 1. Repeatability is within 0.001mm 2. Clamping precision is reached to 0.002mm 3. Pneumatic(air) cylinder is integrated: no cylinder or draw tube is needed. 4. Real front-mounting design allows easy installation and operation. 5. Complete through-hole is reserved. No limitation caused by a draw tube or an air feeder. 6. Highly-sealed chuck body helps protect cutting chips, dust or coolant fluid from entering, 100% waterproof and dustproof. 7. Gentle and precise clamping: suitable for fragile parts machining. 8. Low maintenance is required. 9. Oil-mist air lubricated. Very low temperature rising under high RPM. 10. Clamping force is proportional to input air pressure. Easy for adjusting.
Technical features: 1. Aluminum alloy, light weight, good heat dissipation, effectively reduce the temperature. 2. Powered by Hydraulic. 3. Clamping precision: 0.03-0.05mm 4. Can easily replace the vice jaws to improve accuracy 5. Simple structure, high efficiency, low cost, convenient installation. 6. Lever or Foot Pedal Actuated. 7. Low Maintenance with Oil Mist Lubrication System
