The main technical level of Down-Hole Drilling Rig, with nine patents, has remain the international advanced level. The notable features are as follows: 1. Integration of drilling mechanism, air-compressed supplying system and power group provide improved maneuverability, energy saving and high efficiency. 2. Parts worldwide procurement, chose from well-known brands, actualize the higher efficiency and reliability. 3. Pilot handles control all the machine operations, the various movements and speeds can be adjusted at any time. All of above make sure the machine operate normally and accurately. 4. High reliable crawler traveling system, hydraulic motor driving drilling rod ,and hydraulic cylinder supported sliding rack optimize working efficiency and machine adaptability. 5. Hydraulic disassembly mechanism for impact ,drilling system ,drilling bit. 6. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 7. High effective dust collection device and the anti-hoisting device, which is the original patent at home and abroad, improve the working environment effectively. 8. The domestic unique auto block-prevention mechanism can lift the drill stem automatically when the stem got stuck, making the stoppage much less than before. 9. The patent technology self-adaptive control to the force on the drilling process, cooperating with the auto-sensing control to various rock conditions and decrease the block faults. Nude package for main machinery.
Placing boom is used for horizontal concrete placing at roof of buildings. Hg38 can be increased its height like tower crane. HG38 Anchoring 3Section Placing Boom * 2 erecting methods: freestanding stationary & anchored. Model HG38 delivery pipe dim.(O./Dia.* thickness) (mm*mm) ¦µ134*4 delivery hose dim.(I./Dia.* length) ( "*mm) 5"*3000 Radius of Placing Boom (M) 38 statinary height 47.3 Max. attached height (m) 151 3 hydraulic foldable booms 1st section 20.8m 2nd section 9.2m 3rd section 8.0m Boom Articulation 1st section -4.2¡ã+82.5¡ã 2nd section 0¡ã-180¡ã 3rd section 0¡ã-180¡ã Slewing range 360¡ã Motor Power (KW) 15 Pressure of hydraulic system (Mpa) 31.5 Mode of operation: 1. cable remote control 2. radio remote control Power 380V/50HZ .
1. Max placing radius:32m 2. Slewing: 360 degree 3. 3 sections hydraulic boom 4. self climbing by floor/elevator shaft Our concrete placing boom has captured the market share with good quality, competitive price and good after sale service. It is the necessary auxiliary equipment for pump transferring in construction field. The features of our concrete placing boom is as below: * The climbing frames support climbing through floors and shafts on site with limited space * The machine is fully hydraulic driven and can be slewing 360 * The balance valve and solenoid directional valve are products of well-known brand * The main electric components are from omron or schneider * The modes of operation: radio remote control and cable remote control
(1) Radius: 28m (2) Specification: Self-climbling style (floor or shaft) (3) 3 section foldable arm (4) Brand: POTENTIAL Our placing boom has captured the market share with good quality, competitive price and good after sale service. It is the necessary auxiliary equipment for pump transferring in construction field. The features of our concrete placing boom is as below: * The climbing frames support climbing through floors and shafts on site with limited space * The machine is fully hydraulic driven and can be slewing 360 ¡ã * The balance valve and solenoid directional valve are products of well-known brand * The main electric components are from Omron or Schneider * The modes of operation: radio remote control and cable remote control.
Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones. The features of UNIMATE kelly bar are as follows: Adopt the advanced technology of 6-key design in the world and standard modular design. Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance. The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque. All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys. There are mainly two types of Kelly bars: 1-Interlocking Kelly Bar 2-Friction Kelly Bar Friction Kelly Bar Friction Kelly bars are used with piling rigs for drilling in silt, clay and less dense sand and gravel. The Friction Kelly bars manufactured by Unimate are un-lockable with drive keys on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose. Steel pallet, wooden case.
Drilling buckets are mainly used for drilling water-bearing sandy soil, sludge, clay, muddy sub clay, sandy gravel, cobble, and weathered soft formation. The bucket can be designed into cylindrical type and conical type according to bucket diameter, type of drilling rig and soil conditions. The opening and closing device can be operated manually, mechanically or mixed manner. The welding angle of bucket teeth can be designed according to formation conditions. The bottom cover is made of high-strength Mn plate, and the cutting edge includes single-layer type and double-layer type; the soil inlet also includes single-bottom type and double-bottom type. Unimate drilling buckets are mainly divided into three types: 1-Clay Drilling Buckets 2-Rock Drilling Buckets 3-Cleaning Buckets 1) Clay Drilling Buckets There are two categories of clay drilling buckets: a)Single Cut Clay Bucket b)Double Cut Clay Bucket Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Applications: i)These buckets are suitable for drilling in clay, silt and loose to medium dense sand and gravel. ii)Single cut buckets are recommended up to coarse gravel. iii)Double cut buckets are mainly used for bigger diameter uncased boreholes. iv)Single bottom buckets are used for clay layer and sticky formation. Features: 1-Cylindrical barrel & conical barrel(depends on customer demand) 2-Fish-tail Pilot 3-Throughout ventilation hole 4-Hard facing strips for wear protection 5-Kelly box size as per customer demand 2) Rock Drilling Buckets There are two categories of rock drilling buckets: a)Single Cut Rock Bucket b)Double Cut Rock Bucket Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Applications: i) Rock buckets are suitable for drilling in medium to weak rock and in very dense sand and gravel. ii) Single cut buckets are recommended up to coarse gravel. iii) Double cut buckets are recommended for secant piles and bigger diameters uncased boreholes. Features: 1-Throughout ventilation hole 2-Rock Pilot 3-Hard facing strips for wear protection 4-Kelly box size as per customer demand 3) Cleaning Bucket Cleaning Diameter Range: 500~2500mm Barrel Length: 1000~1500mm Main Application: Cleaning bucket is used for cleaning the bottom of borehole. Steel pallet, wooden case.
Drilling Augers Short augers are mainly divided into the following types: 1-Conical Rock Auger 2-Flat or Butterfly Rock Auger 3-Flat or Butterfly Clay Auger 1) Conical Rock Auger There are two categories of conical rock augers: a)Single Cut Auger b)Double Cut Auger Drilling Diameter Range: 500~2500mm Main Applications: i) Single Cut and Double Cut Augers are suitable for drilling in medium to strong rock (15~60 MPa) ii) Double Cut are recommended in bigger diameters uncased boreholes Features: 1-Rock Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand 2) Flat or Butterfly Rock Auger: There are three categories of Flat or Butterfly Rock Auger: a)Single Cut Auger b)Double Cut Auger c)Double Cut Auger without Rock Pilot Drilling Diameter Range: 500~2500mm Main Applications: i) The Single Cut and Double Cut Augers are suitable for drilling in weak fractured rock and very dense sand and gravel (Less than 5 MPa) ii) Double Cut Augers are mainly used for bigger diameter uncased boreholes and secant piles iii) Double Cut Auger without rock pilot are recommended for fractured rock or moderately weak to moderately strong rock (5~50 MPa) Features: 1-Rock Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand 3) Flat or Butterfly Clay Auger There are two categories of Flat or Butterfly Rock Auger: a)Single Cut Auger b)Double Cut Auger Drilling Diameter Range: 500~2500mm Main Applications: i) The Single Cut and Double Cut Augers are suitable for drilling in clay, silt and loose to medium dense sand and gravel ii) The Single Cut and Double Cut Augers with side cutters are suitable for drilling in hard clay, silt and medium to high dense sand and gravel iii) Single Cut Augers are recommended up to coarse gravel Features: 1-Fish-tail Pilot 2-Hard facing strips on flights for wear protection 3-Kelly box size as per customer demand. Steel pallet, wooden case.
Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones. The features of Unimate kelly bar are as follows: Adopt the advanced technology of 6-key design in the world and standard modular design. Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance. The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque. All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys. There are mainly two types of Kelly bars: 1-Interlocking Kelly Bar 2-Friction Kelly Bar Interlocking Kelly Bar Interlocking Kelly bars are used with piling rigs for drilling in dense sand and gravel and weak to strong rock. The Interlocking Kelly bars manufactured by Unimate can be fully locked by mechanical locking system on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose. Steel pallet , wooden pallet.
Specification: Deboom's hydraulic static pile driver has the advantage of high mechanization degree,comfortable operation, flexible. THE SPECIFICATION OF DEBOOM HYDRUALIC STAIC PILE DIRVER: Model Unit YZY680 Parameter Rated Piling Pressure (KN) 6800 Piling Speed Fast ( m/ min) 6.2 Low 1.1 Pilling stroke per time (m ) 1.8 Shift Longitudinal (m ) 3.6 Horizontal 0.7 Angle range ( ¡ã ) 11 Rise stroke (m ) 1.1 Max spun pile (mm ) 600 Side piling space (m) 0.8 Comer piling space (m) 1.7 Lift weight (T) 16 Lift moment (tf.m) 80 Power piling (kw) 119 Lift 30 Dimension Working Length (mm) 13500 Working Width 7900 Transportation Height 3100 Gross weight (T).
Max. Theor. Concrete Output: 87m3/h Concrete Pressure: 13Mpa Model Of Main Pump: K3V112DT Cylinder Diameter/ Rod Dx Strok :125/80X1650mm Concrete Cylinder Bore X Strok : 200X1650mm Motor Power: Weichai Cummins/132kw Rated Rotating Speed: 2200r/m Hopper Capacity: 660L Hopper Height: 1400mm Theor.Max.Horizontal Delivery Distance: 1350m Theor.Max.Vertical Delivery Distance: 350m Number Of Strokes Per min : 28 Oil Tank Capacity: 500L Out Dimension: 6400x2160x2800 Total Weight: 6300kg. Nude package ,put one unit in a 20' container.
The down-the-hole hammer is a new type valveless hammer driven by compress air.It is the ideal rock drillling tool with advages of large impact energy,high penetration rate,long service life,good efficiency of drilling cuttings removal,easy operation,reliable working performance and so on. TH----for wet drilling Wadely applied to all kinds of rock boring hole drilling and excellent in projects for casing system and water well drilling. Can be matched to various types of hammers popular in the world and drill the holes from 76mm to 1200mm in diameter. TS----for deep hole and super deep hole drilling Can be meet to the needs of drilling holes from 203mm to 660mm in diameters. TG----for drying drilling Have stable performance, fast speed, long service life in sleeves, and 10% less air consumption than other ordinary hammers, and can also work well without the foot valves. Drill holes from 90mm to 254mm. All our Hammers can be easily adapted to accept different types of bit shanks as COP, BR, DHD, SD, XL QL, MACH, Halco and Mission by simply changing a few basic components. Several models are available in Heavy-Duty format to suit particularly arduous and abrasive drilling conditions. In wooden case or in carton
Paving breaker, used for breaking the road surface, rammering the broken pieces, and all kinds of removing and cleaning, as well as the railway repair work.
It is suitable for compaction of sand, gravel, grit, granular materials, segmental brick paving and asphalt in narrow trenches and along foundations, walls and abutments. The plate compactor was designed in a way of possessing itself in high running speed and standard impacting density as well as simple operating-controlling method, which can be applied in different environments. The unique design configuration was applied to the impact-excitation barrel effectively enhanced the service life of compactor. The ergonomic road wheels integrated with the framework simplifies operation.
(1). Applied to compact the gravel, soil, as well as the asphalt pavement; (2) walk behind, the operation model can be changed easily. (3) suitable for the repairing and maintenance the roads, sidewalks, bridges and car parking lots.
Cutters are widely used to cut the asphalt surface, cement road surface, concrete goods and stone of municipal, construction, telecom, highway, bridge, free water pipes and airport construction projects. With the use of the diamond cutters, longer service life is guaranteed. The cutting speed is higher except the incision is regular and artistic. The spraying system comes with water-tank, cooling water is sprayed to the blades to lubricate and cool the blades, which enhances the service life of the blades. It is mainly used in the cutting of the expansion joint of the concrete pavements. Equipped with foldable guide rod is for accurate cutting
Diamond core bits are widely used in the fild of geological exploration, engineering-oriented, hydroelectric and building engineering. Diamond drill bit series include the bits of different structures (single tube bit, double tube bit and wire line core) and various bits standards.(dometic and foreigh standards). Carton or ply-wooden cases.
Outdiamater: 79mm Length: 991 Back adapter thread: API 2 3/8" REG Structure stroke: 127mm Working air pressure: 1.3 MPa-2.5Mpa Mathched bits: COP34, IR3.5" Wooden cases
Dth hammer and bit
Drill Pipe Standards and technical conditions for supply:API SPEC 5DP Grade: E75, X95, G105, S135 . The wear-resistant belt of tool joint: Arnco 100XT, 200XT, 300XT, 400XT Internal coating drill pipe: TK34, DPC, TC2000, TC3000 Usage: Mine blasting, water well drilling, geothermal wells drilling, fore poling, coal and nonferrous metal mining projects, etc.
LW156FV is a product independently researched and developed by top brand. It is equipped with national engine, high-quality split type double change, four-wheel drive, full hydraulic steering, strong power, higher efficiency and stronger environmental adaptability.
