Find Verified Beer Tower Suppliers, Manufacturers and Wholesalers

TD5 beer brewing pump is the China's first all-stainless steel pump head and pump chamber, best selling in European and American markets. Typical applications: home beer brewing pump, hot water circulation, beverage dispenser, general liquid transfer. The Max flow rate:25L/Minute, Max water head:4.5M. Voltage:17V/24V

Power input: dc12v
Power consumption:10w
Flash frequency: 20-60 times/min
Light intensity: 2000 cd (± 25%)
Emitting color: red
Light source: imported led
Ingress protection: ip65
Lightning protection: 10 ka
Weight: 9kg

Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones.

The features of UNIMATE kelly bar are as follows:
Adopt the advanced technology of 6-key design in the world and standard modular design.
Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance.

The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque.
All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys.

There are mainly two types of Kelly bars:
1-Interlocking Kelly Bar
2-Friction Kelly Bar

Friction Kelly Bar
Friction Kelly bars are used with piling rigs for drilling in silt, clay and less dense sand and gravel. The Friction Kelly bars manufactured by Unimate are un-lockable with drive keys on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose.

Steel pallet, wooden case.

Drilling buckets are mainly used for drilling water-bearing sandy soil, sludge, clay, muddy sub clay, sandy gravel, cobble, and weathered soft formation. The bucket can be designed into cylindrical type and conical type according to bucket diameter, type of drilling rig and soil conditions. The opening and closing device can be operated manually, mechanically or mixed manner. The welding angle of bucket teeth can be designed according to formation conditions.

The bottom cover is made of high-strength Mn plate, and the cutting edge includes single-layer type and double-layer type; the soil inlet also includes single-bottom type and double-bottom type.
Unimate drilling buckets are mainly divided into three types:
1-Clay Drilling Buckets
2-Rock Drilling Buckets
3-Cleaning Buckets

1) Clay Drilling Buckets
There are two categories of clay drilling buckets:
a)Single Cut Clay Bucket
b)Double Cut Clay Bucket
Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm

Main Applications:
i)These buckets are suitable for drilling in clay, silt and loose to medium dense sand and gravel.
ii)Single cut buckets are recommended up to coarse gravel.
iii)Double cut buckets are mainly used for bigger diameter uncased boreholes.
iv)Single bottom buckets are used for clay layer and sticky formation.

Features:
1-Cylindrical barrel & conical barrel(depends on customer demand)
2-Fish-tail Pilot
3-Throughout ventilation hole
4-Hard facing strips for wear protection
5-Kelly box size as per customer demand

2) Rock Drilling Buckets
There are two categories of rock drilling buckets:
a)Single Cut Rock Bucket
b)Double Cut Rock Bucket

Drilling Diameter Range: 500~2500mm Barrel Length: 1000~1500mm

Main Applications:

i) Rock buckets are suitable for drilling in medium to weak rock and in very dense sand and gravel.
ii) Single cut buckets are recommended up to coarse gravel.
iii) Double cut buckets are recommended for secant piles and bigger diameters uncased boreholes.

Features:
1-Throughout ventilation hole
2-Rock Pilot
3-Hard facing strips for wear protection
4-Kelly box size as per customer demand

3) Cleaning Bucket
Cleaning Diameter Range: 500~2500mm
Barrel Length: 1000~1500mm

Main Application:
Cleaning bucket is used for cleaning the bottom of borehole.



Steel pallet, wooden case.

Drilling Augers
Short augers are mainly divided into the following types:
1-Conical Rock Auger
2-Flat or Butterfly Rock Auger
3-Flat or Butterfly Clay Auger

1) Conical Rock Auger
There are two categories of conical rock augers:
a)Single Cut Auger
b)Double Cut Auger

Drilling Diameter Range: 500~2500mm

Main Applications:
i) Single Cut and Double Cut Augers are suitable for drilling in medium to strong rock (15~60 MPa)
ii) Double Cut are recommended in bigger diameters uncased boreholes


Features:
1-Rock Pilot
2-Hard facing strips on flights for wear protection
3-Kelly box size as per customer demand
2) Flat or Butterfly Rock Auger:
There are three categories of Flat or Butterfly Rock Auger:
a)Single Cut Auger
b)Double Cut Auger
c)Double Cut Auger without Rock Pilot

Drilling Diameter Range: 500~2500mm

Main Applications:
i) The Single Cut and Double Cut Augers are suitable for drilling in weak fractured rock and very dense sand and gravel (Less than 5 MPa)
ii) Double Cut Augers are mainly used for bigger diameter uncased boreholes and secant piles
iii) Double Cut Auger without rock pilot are recommended for fractured rock or moderately weak to moderately strong rock (5~50 MPa)

Features:
1-Rock Pilot
2-Hard facing strips on flights for wear protection
3-Kelly box size as per customer demand

3) Flat or Butterfly Clay Auger
There are two categories of Flat or Butterfly Rock Auger:
a)Single Cut Auger
b)Double Cut Auger

Drilling Diameter Range: 500~2500mm

Main Applications:
i) The Single Cut and Double Cut Augers are suitable for drilling in clay, silt and loose to medium dense sand and gravel
ii) The Single Cut and Double Cut Augers with side cutters are suitable for drilling in hard clay, silt and medium to high dense sand and gravel
iii) Single Cut Augers are recommended up to coarse gravel

Features:
1-Fish-tail Pilot
2-Hard facing strips on flights for wear protection
3-Kelly box size as per customer demand.






Steel pallet, wooden case.

Core barrels are used to cut an annular ring in rock or concrete or reinforced concrete. The centre core of the rock or concrete is usually crushed with rock auger. The most important advantage of a core barrel is that it assists to concentrate the torque and crowd force on a small ring of cutting teeth.

Core barrels are generally divided into four types:
1)Core Barrel with pin teeth (Applicable for cutting in reinforced concrete)
2)Core Barrel with replaceable blocks (Applicable for strong rock up to 100MPa or lightly reinforced concrete)
3)Core Barrel with Bullet Bits ( Applicable for strong rock up to 100MPa or Rock with deep cracks)
4)Core Barrel with Roller Bits (Applicable for very strong rock formations with compressive strength greater than 100MPa)

Cutting Diameter Range: 520~2500mm


Steel pallet, wooden case.

Kelly bar is the key part of a drilling machine, and its quality directly affects the performance of the whole machine. The main purpose of kelly bar is to transfer the torque of rotary drive and crowd pressure of the crowd system to the drilling tool. Based on the rich manufacturing experience and by absorbing the advanced technology both at home and abroad, we can produce first-class kelly bar which can be compared favorably with the imported ones.

The features of Unimate kelly bar are as follows:
Adopt the advanced technology of 6-key design in the world and standard modular design.
Equipped with advanced processing facilities, workmanship and manufacturing equipments, UNIMATE kelly bar enjoys a low weight, high strength, high straightness of single bar, thinner tube, smaller inter-tube distance and good abrasion resistance.

The raw materials are either imported from Germany like the high abrasion resistance materials, or from Chinese top manufacturer such as the seamless steel tube with alloy. All the tubes made in China are specially made seamless alloy tube, which guarantees the accuracy of the sizes, location, physical properties and easy welding. The small-diameter tubes undergo reheat treatment. The friction kelly bar can be used under full torque.
All the outer keys have undergone special heat treatment; therefore, they possess higher hardness, higher flexibility and excellent welding properties, which provide higher abrasion resistance to the keys.

There are mainly two types of Kelly bars:
1-Interlocking Kelly Bar
2-Friction Kelly Bar

Interlocking Kelly Bar
Interlocking Kelly bars are used with piling rigs for drilling in dense sand and gravel and weak to strong rock. The Interlocking Kelly bars manufactured by Unimate can be fully locked by mechanical locking system on each section. Kelly bars can be equipped with specially designed springs or pressure plates for shock absorbing purpose.


Steel pallet , wooden pallet.

Placing boom is used for horizontal concrete placing at roof of buildings. Hg38 can be increased its height like tower crane.

HG38 Anchoring 3Section Placing Boom
* 2 erecting methods: freestanding stationary & anchored.
Model HG38
delivery pipe dim.(O./Dia.* thickness) (mm*mm) ¦µ134*4
delivery hose dim.(I./Dia.* length) ( "*mm) 5"*3000
Radius of Placing Boom (M) 38
statinary height 47.3
Max. attached height (m) 151
3 hydraulic foldable booms 1st section 20.8m
2nd section 9.2m
3rd section 8.0m
Boom Articulation 1st section -4.2¡ã+82.5¡ã
2nd section 0¡ã-180¡ã
3rd section 0¡ã-180¡ã
Slewing range 360¡ã
Motor Power (KW) 15
Pressure of hydraulic system (Mpa) 31.5
Mode of operation: 1. cable remote control 2. radio remote control
Power 380V/50HZ .

Hollow sections for structural purpose

Shape:
Hollow sections: square, rectangular, round, triangular, hexagonal, eliptical hollow sections
Scaffolding

Usage:
Hollow sections:
Construction: hall structure, sea trestle, airport structure, shipbuilding, security door frames, garage doors, strengthening liners of steel doors and windows, indoor partition walls, cable bridge structures and expressway safety guards, balustrade, decorating, residential, ornamental pipes

Automotive parts: motorcar case, car and bus manufacture, vehicles

Agriculture: agricultural equipment

Industry: machinery, solar stent, offshore oil field, mine equipment, electromechanical hardware, , heavy engineering, mining and resources, process engineering, materials handling, mechanical parts

Traffic: walking rails, roll-up doors, guardrail, plaza structure, signage, road furniture, fencing
Logistics storage: supermarket shelves, containers, transport industries, commercial construction
Other: sports apparatus, leisure equipment, furniture, school furniture

Scaffolding tube:
Material storage racks, pallets, hydraulic platforms, trusses, columns, purlins, greenhouse stands towers

Quality standard:
Hollow sections:
Gb/t 13793 longitudinal electric resistance welded steel tubes
Gb/t 6728 cold formed steel hollow sections for general structure--dimensions, shapes, weight and permissble deviations
Astm a500 cold formed welded and seamless carbon steel steel structural tubing in round and shapes
Astm a 53 standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless
En 10210 hot finished structural hollow sections of non-alloy and fine grain structural steels
En 10219 cold formed welded structural hollow sections of non-alloy and fine grain steels
Jis g 3466 carbon steel square for general structural purposes
Bs 1387 steel tubes for use for water, gas, air and steam


In bundle or according to your requirements

LSAW Steel Pipe-Bracings and legs, fabricated to be a steel jacket for offshore wind tower foundation.