Ruled area: 70% Ruled gratings: Specifications: Ruled area: 70% Concave gratings: Specifications: Ruled area: 70%.
According to custom design to manufacture infrared windows, UV fused silica windows, CaF2 windows, ZnSe windows, Si windows, etc. Material: flint glass, UV fused silica, infrared fuses silica, CaF2, Ge, ZnSe, Si, etc. Diameter: 4mm-- 100mm Parallelism:
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot
Standard lot
Optical components..
Corner Cube Prism has the property that any incident beam will be reflected parallel to itself, regardless of the incident angle. These prisms are ideal where precision alignment is difficult or time-consuming. Material:N-BK7 H-K9L JGS1 Size:12.7mm 25.4mm 38.1mm 50.8mm or customized size Beam Deviation:+/-3'' +/-5'' +/-8'' Flatness:1/10lambda at 632.8nm Surface Quality:40-20. Clear Aperture>90%
Sunday Optics is making various prisms, right angle prisms, penta angle prism, roof prisms, wedge prisms, dove prisms, porro prisms Material: BK7 K9 JGS1 Sapphire ZnSe Germanium Silicon Size:0.5-600mm Angle tolerance:+/-1 seconds Surface Quality:20/10 Flatness:1/10lambda. Coating: Al, Silver, Gold,HR,Dielectric.
Sunday Optics manufacture high precison optical glass prisms include: right angle prism, wedge prisms, penta angle prism, dove prism, roof prisms, corner cube prisms, PBS ,NPBS,etc. Material:H-K9L ,N-BK7 JGS1 Fused Silica, Sapphire, ZnSe,Germanium,Silicon. Size:0.5-700mm Surface quality:20-10 Flatness:1/10lambda. Angle tolearnce:2'' Coating: AR BBAR HR Dielectric.
Sunday Optics manufacture half penta angle prisms according to customer size and drawing The half penta prism makes the beam turn 45, generally Aluminum coatied and black paint protection Material:H-K9L Size:5-100mm Tolerance:-0.05mm Surface Quality:20-10 Angle Tolerance90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Penta Angle Prism are widely used in laser level, Image system, precision system, and optical area. For penta prism, the deviation angle of 90 is independent of the orientation of the prism, thus it is particularly important and wide in application which the prism orientation cannot be precisely controlled, we can produce high precision penta angle prism,and make coating according to customer's request. Penta Angle Prism Specifications Material BK7, UV Fused Silica,Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-380mm Size tolerance +/-0.02mm or customer request Clear Aperture>90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Prisms Optical Components Customized Light Guide Prism PARAMETER: Prisms:Right angle prism, Dove prism, Beam splitter, Penta Prism, Corner prism, Trapezium Prism, Rhomoboid Prism, Roof Prism, Cube prism, customized prisms,etc. Light Guide Prism Supplier:ChangChun BRD Optical co., Ltd Flatness 2 /10 Surface Quality 80/50-10/5 Angle Tolerance 3-15 Clear Aperture >85%-95% Chamfer 0.3mmÃ?45°-0.1mmÃ?45° Coating As per customers requirement
Prisms Optical Components Right Angle Prism Supplier:ChangChun BRD Optical co., Ltd PARAMETER: Right angle prisms are extremely versatile optical components, commonly used as individual prisms and components of optical assemblies. A beam of light entering the leg of a right angle prism will deviate by a nominal value of 90°, while precise rotation of the prism controls beam alignment. When light enters the hypotenuse of the prism, it is commonly called a porro prism. In this configuration, a light beam will undergo 180° deviation that is invariant in the azimuthal axis, while precise adjustment of the prism controls beam elevation. Specification Material BK7 glass / UV Fused silica Dimension 3mm~200mm Dimension tolerance ±0.1mm~±0.05mm Surface quality 60/40, 40/20, 20/10 Surface flatness λ/20 λ/4 Angle tolerance
Prisms Optical Components PARAMETER: BK7 Glass Dove Prism have an unusual and very interesting characteristic , if you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal peformance, use dove prisms with collimated light. Specification Material BK7 glass / Fused Silica Dimension tolerance + 0.0 / -0.2mm Deviation 3arc min. Flatness λ/2@632.8nm Clear aperture >85% Surface quality 60/40, 40/20 Bevel 0.1mm Ã?45°
Optical Windows Optical Components PARAMETER: Optical Glass Square Windows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the light penetration strength,and own function of waterproof ,dustproof,and scratch-proof. They are mainly used in mobile phone screen and lens protection,digital camera, digital video recorders, industrial optical windows, touch screen products, GPS products, digital electronic products windows, car rearview mirror, computer screen, laptop screen, watch surface and so on. BRD Optical Provide all types of windows made from different materials. Special size and materials are also available upon request. In addition, we provide a variety of single layer or multiplayer anti-reflecting coating on optical windows. Specification Material Optical glass, Fused silica, Optical crystal Design Wavelength 633nm Focal Length Tolerance ±2%-5% Dimension 5-150mm Dimension Tolerance +0/-0.2mm ~ +0/-0.02mm Flatness 2λ-λ/10 Surface Quality 80/50-10/5 Clear Aperture >85%-95% Bevel 0.3mmÃ?45°-0.1mmÃ?45° Coating As per customers requirement
Optical Windows Optical Components PARAMETER: optical glass Step Windows are latively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the light penetration strength,and own function of waterproof ,dustproof,and scratch-proof. They are mainly used in mobile phone screen and lens protection,digital camera, digital video recorders, industrial optical windows, touch screen products, GPS products, digital electronic products windows, car rearview mirror, computer screen, laptop screen, watch surface and so on. BRD Optical Provide all types of windows made from different materials. Special size and materials are also available upon request. In addition, we provide a variety of single layer or multiplayer anti-reflecting coating on optical windows. Specification Material Optical glass, Fused silica, Optical crystal Design Wavelength 633nm Focal Length Tolerance ±2%-5% Dimension 5-150mm Dimension Tolerance +0/-0.2mm ~ +0/-0.02mm Flatness 2λ-λ/10 Surface Quality 80/50-10/5 Clear Aperture >85%-95% Bevel 0.3mmÃ?45°-0.1mmÃ?45° Coating As per customers requirement
Prisms Optical Components PARAMETER: Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms. Polarization Cube Beamsplitter Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms. High Powe Cube Polarization Beamsplitter High power polarization beamsplitter can be facricated by BRD Optical. Same as the above, it use precision optical contacted technology which makes it has high laser damage threshold. High Damage Threshold>500MV/cm2 Transmission >96% Central Wavelength Extinction Ratio>1000:1 Specification Material Optical glass BK7 / ZF glass Dinension tolerance ±0.1mm Flatness λ/4 632.8nm Surface quality 60/40, 40/20 Angle tolerance 96%, Ts,1% (Narrowband) Tpave > 95%, Ts,1% (Broadband) Principal reflectance Rs>99%, Rp
Optical Components Fused Silica Wedge Prism PARAMETER: The wedge prism is a prism with a shallow angle between its input and output surfaces. This angle is usually 3 degrees or less. Refraction at the surfaces causes the prism to deflect light by a fixed angle. When viewing a scene through such a prism, objects will appear to be offset by an amount that varies with their distance from the prism. Specification Material BK7 glass / Fused silica Surface Flatness: < λ / 10 @ 633nm ~λ/4@633nm Surface Quality: 60/40, 40/20, 20/10, 10/5 (both sides) Dimension Tolerance:
HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.
orner cube is a high-quality product designed to meet the needs of businesses looking to laser measurement. This product offers a range of features and benefits that make it an ideal choice for businesses of all sizes. Features: Retroreflector prism consists of three mutually perpendicular reflecting surfaces that form an angular cone structure with an internal angle of 90 degrees. When light is incident on any of the reflecting surfaces, it undergoes three reflections and eventually leaves the prism in a direction almost exactly opposite to that of the incident light. This triple reflection ensures that the direction of the reflected light is highly aligned with the direction of the incident light, enabling accurate retroreflection of the light, even if the angle of incidence changes. Benefits: a. UV Material b. High Flatness c. High Volume d. Cheap Price We believe that our corner cube offers an unbeatable combination of quality, performance, and value. If you have any questions about this product or would like to learn more about how it can benefit your business, please don't hesitate to contact us. We are dedicated to providing excellent customer service and helping our customers achieve their business goals. Thank you for considering corner cube. We look forward to the opportunity to work with you and help you achieve success.
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
