Ground screw, ground anchor.
Tricone bit, PDC bit, hole openers, drag bit and other drilling sets.
Pdc bit, hole opener, tricone drill bit, roller cone, single cone bit.
Drilling machines.
Drilling Tools, Drill Pipe, Drill Collar, Heavy Weight Drill Pipe, Pup Joint And Kelly Etc.
Bits From 3to 26of Different Series: Such As Matrix Body Series, Steel Body Series, Coring Series, Bi Center Series, Reaming Tools, Etc..
Model no:iadc m233 Place of origin:hebei, china (mainland) Body type:matrix Certificate:api Cutter size:13mm Blade count:5 Rotary speed:suitable for rotary & pdm Weight-on-bit:15 to 70 kn / 1.5 to 7.0 tonnes / 3, 300 to 16, 000 lbf Flow rate:10 to 30 l/s Applying formation:medium soft to medium hard Product specification Body type Steel Blade count 5 Face cutters 13mm Gauge cutters 13mm Nozzle no. & type 5 p Api connection (in) 3 1/2 reg Junk slot area(sq in) 5.154 Gauge length 2 in Gauge protection Optional available Operating parameters Rotary speed Suitable for rotary & pdm Weight-on-bit 15 to 70 kn 1.5
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*40*45 cm 50kg
The steel tricone bit is made of high manganese carbon steel, and our products almost cover all the iadc code, all in good quality and reasonable price. 30*35*40cm 50kg
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*35*40cm 45kg
The used tricone bits are much more cheaper than the new ones because of the cost is low, but the quality is promised. 30*35*40cm 45kg
"13 5/8¡å-5000psi Double Ram BOP Bore: 13 5/8¡± Working pressure: 5,000psi Top connection: 13 5/8¡±-5000psi 6BXBX160 SST Studded Bottom connection: 13 5/8¡±-5000psi 6BXBX160 SST Flanged Weight: 7206 Dimension: 2594¡Á970¡Á1180"
49 1/2¡å-500psi diverter system bore: 49 1/2¡å working pressure: 500psi shell test pressure: 750 psi the max diameter of bits through: 47¡å max bore(diverter assembly): 28¡å seal range£º5¡°¡«16¡± temperature grade: t20£¨-
"13 5/8¡å-5000psi annular bop bore: 13 5/8¡± Working pressure: 5000psi Top connection: 13 5/8¡±-5000psi 6bxbx160 sst studded Bottom connection: 13 5/8¡±-5000psi 6bxbx160 sst flanged Weight: 6082 Dimension: 1271¡á1271¡á1155"
29 1/2"-500psi annular bop bore: 29 1/2" working pressure: 500psi top connection: 29 1/2", asme b16.47, 1000 psi wp studded, ring groove r-95 bottom connection: 29 1/2", asme b16.47, 1000 psi wp, flanged, ring groove r-95 weight£¨kg£©£º10973 dimension£¨mm£©£º2070¡á2070¡á1749
1.The description of PDC Bits PDC Bit uses PDC as main cutting components, with the excellent wear-ability and impact toughness of the PDC. It has a long useful life, high-efficiency, and good performance cost ratio. PDC bit is mainly used for drilling soft and medium formation, it works under low drilling pressure, medium-low speed, big drainage. We can supply all kinds of PDC Core drill bits and non-core drill bits and they are widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway and provide reliable data support for drilling rock and coal of geology and engineering research. We can also design PDC bits according to customers' requirements, such as different geological condition, special strata and so on. PDC (polycrystalline diamond compact) drill bit is produced with special high-frequency welding techniques and manufactured by welding PDC of high wear resistant Si to the steel body as cutting edges. 2.The Features of PDC Bits: A: Super long life. The grinding/consumption ratio of PDC is 20-40 times that of tungsten carbide bit and 10 times that of diamond bit. B: High drilling speed. C: Can be operated with low pressure and low speed. D: Has a good gage protection. E: Can be used widely, more suitable for drilling in the stratum with formation< 7. F: Low cost. G: High toughness and impact strength
We supply high quality drill pipes. These drill pipes are API 5D certified and dependable. The grades of our drill pipes include E, X-95, G-105, S-135. And X-95, G-105 and S-135 are high strength grades of drill pipes.
1, the classification: drilling, exploration, oil, drill, and drilling accessories 2, the product name: 215.9 mm 8 1/2 inches £¬rubber sealing disc bit three 3, product introduction: H series bit for O form rubber sealing sliding bearing drill bit, in a routine use can withstand high speed drilling of pressure. 4, its main structure features: 1) using high strength and high toughness cemented carbide gear, improve the shock resistance ability of teeth, reduce the broken teeth rate 2) the optimization of the tooth row number, gear, toothy height and unique alloy tooth shape, give full play to the drill bit cutting ability and the cutting speed 3) the card spring lock, able to bear high disc drilling pressure 4) die hole with gold, and improve the welding minus integration of the bearing capacity of bite 5) using high saturated acrylonitrile-butadiene rubber sealing ring, optimization of o-type seal compression quantity and improve the reliability of the bearing seal 6) can limit the pressure difference and prevent drilling fluid into the lubrication system of the rubber oil storage sac, for bearing system provides good lubrication, and to ensure that "O" type sealing ring, improve the normal work bit working life 7) with 250 ¡æ high temperature resistance, low wear new, improving the drill bit sealing grease lubrication system high temperature resistant ability. According to the customer request.
Iadc;437 517 537 637 617 . In wooden case and steel case.
This semi-automatic rotary hawthorn coring and slicing device is to put the whole hawthorn into the fruit hole, with the rotation of the rotary table, hawthorn will be transported to the machine under the needle, to complete the work of coring and slicing.This equipment is produced by cangzhou wanqing machinery equipment co., LTD.The manufacturer promises that all the equipment are sold directly by the manufacturer to guarantee the quality and perfect after-sales service.This hawthorn core-removing and slicing machine is made of stainless steel. The machine body is more durable and durable, and the appearance is atmospheric, which greatly improves the safety performance.The machine needle of this equipment is very strong, even if working for a long time and continuously, there will be no damage.At the same time, the nucleated seeds had smaller pore size, retained more pulp, and were especially clean and had no residual residual seeds.The device can remove the core and simultaneously complete the slicing effect.This point customers can according to their own needs, their own Settings.A multi-purpose machine, in improving production efficiency at the same time, and greatly reduce labor costs.
