Window (different kind)
Doors (different kind)
Doors (different kind)
Doors (different kind)
Doors (different kind)
Packaged container houses have advantages such as earthquake resistance, wind resistance, easy construction, energy conservation and environmental protection, and recyclability. They are widely used in construction sites, scenic accommodation, hotels and catering, and other fields. The packaging size for a single set is W2438mm * L5800mm * H700mm, and the installed size is W2438mm * L5800mm * H2896mm. Multiple unlimited combinations are possible. It is an ideal product for temporary office and accommodation on construction sites.
1. High temperature strength; 2. Resistant to corrosion in various atmospheres; 3. Excellent thermal shock stability; 4. Good thermal insulation; 5. The energy-saving effect is remarkable The operating temperature is below 1350C. Thermal insulation refractories are characterized by high porosity, generally 40%-85%; Low bulk density and low dry 1.5g/cm3: low thermal conductivity, generally less than 1.0W (m.K), it acts as the thermal insulation material of industrial kiln, can reduce the heat dissipation loss of the furnace, save energy, and can reduce the quality of the equipment under heat, the mechanical strength, wear resistance and slag erosion resistance of the thermal insulation refractory material is poor, and it is not suitable for the load-bearing structure of the kiln and direct contact with slag, charge, molten metal and other parts
Mullite bricks refer to high-alumina refractories with mullite as the main crystalline phase, and the general alumina content is between 65% ~ 75%. It is mainly used for hot blast furnace top, blast furnace body and bottom, glass melting furnace regenerator, ceramic sintering kiln, petroleum cracking system dead angle furnace lining, etc. Mullite bricks have high refractoriness, up to more than 1790 C, and have good thermal shock resistance. There are two types: sintered mullite bricks and fused mullite bricks. The crystallization of fused mullite is larger than that of sintered mullite, and the thermal shock resistance is better than that of sintered products. Aluminum content: 65-90% Standard brick size: 230*115*65mm Compressive strength at room temperature: 100-120MPa Good thermal shock resistance:
Performance characteristics: wear resistance, corrosion resistance, peeling resistance, low creep, good thermal shock stability, service life is 1.5 times that of ordinary products; Main uses: Mainly used in blast furnaces, hot blast furnaces, carbon roasting furnaces, carbon calciners, coke ovens, steel barrels, casting systems, boilers, cement kilns, glass kilns and various kiln lining and thermal equipment, etc., suitable for metallurgy, machinery, building materials, casting, ceramics, electric power, petroleum, chemical and other industries. Standard size:230*115*65mm First-class high-alumina bricks Al2O3 75% second-class high-alumina bricks Al2O3 60%~75% third-class high-alumina bricks Al2O3 48%~60%
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge. Products series : Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean Tempered raindown/nashiji pattern glass The pattern bring distinctive decorative on glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning Tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Tempered low iron glass High light transparent with colorless appearance The glass blue edge makes the whole shower enclosure in high grade Tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250. Steel frame screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients' demands. Features of Steel frame screen 1. Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. 2.High strength frame, multi-ribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screen�??s acceptable flow , the intensity and the lifetime 3.The wedge-shaped fastening device, can make the erection of screens more handily and quickly 4.The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damage. By doing so, the operator can cut down the stop time and reduce the cost.
Door and door quick installation system. DISCOVER THE INTER-JOIN DIFFERENCE SKIRTINGS ARCHITRAVES DOOR UNITS WINDOW REVEALS THE COMPLETE FINISHING SYSTEM We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it! The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process Eliminates: Skilled labour associated with hanging doors Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs Eliminates: Labour associated with fitting locks Eliminates: Mitre cuts required for skirting and architraves Eliminates: Gap filling sealant around skirting and architraves Eliminates: Cut-in painting around skirting/walls and architraves Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs Eliminates: Trimming door jamb & window reveals Resulting in increased productivity & cost savings THE INTER-JOIN DIFFERENCE DELIVERING A HIGHER QUALITY FINISHED PRODUCT SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING ELIMINATION OF FINISHING DEFECTS MATERIALS ARE 100% TERMITE RESISTANT MATERIALS ARE WATERPROOF DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION All Door Units are pre-finished, assembled and ready for immediate installation Residential door manufactured from completely waterproof composite (WPC & Wooden) material Residential doors are available in varying styles and designs Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine Residential and commercial hardware available
Door Handle-5-21
Door Handle-5-20
Door Handle-5-19
Door Handle-5-18
Door Handle-5-17
Door Handle-5-16
Door Handle-5-15
Door Handle-5-14
