Detailed products description: 1. Certificate: Solar keymark. SRCC. Watermark, Standardmark 2. non-pressure solar water heater 3. 15 years of lifetime 4. high efficiency and good heat conductivity 5. intelligent control ,display the temperature all the time. Specification: Storage tank volume Outer casing: aluminium alloy thickness :0.5mm Inter tank: SUS304 2b stainless steel Insulation layer: polyurethane foam /rock wool for optional Inlet and outlet: SUS304 2b Heat preservation: 72 hours Welding: Arg welding Vacuum tube Number of tube: 20L ,24L,26L,28L,32L for optional Tube length: 47*1500/58*1800/47*1800 for optional Heat absorption rate : 91% Thermal damage rate: ULT =0.82W/(m2) Coating of vacuum tube: AL/N/AL Heat pipe: anti-freeszing>-35 Hail resistance: 25mm Working pressure: 6bar Max test pressure:12bar Max working temperature: 280C Tube holder: UV stabilized nylon Support Aluminum alloy.
Features: 1) Inner tank: stainless steel SUS304-0.5mm 2) Vacuum tube:QB-AL-N/AL-47-1500/58-1800 3) Outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel SUS304 4) insulation :polyurethane 50mm/60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel SUS430-1.5mm 6) Reflector: aluminum component/stainless steel .
Type: E5-58/1800-16 Outer tank: Al-Zn sheets Inner tank: SUS304-2B stainless steel Insulation: polyurethane, 55mm Absorptive coating: AL-N/AL Vacuum tube: Borosilicate glass,diameter: 58mm, length: 1.8m, 16pcs. Frame: aluminum alloy Absorber area(¬O): 2.0¬O Volume tank(L): 135L. Carton.
Vacuum Induction Melting Furnace Introduction: As the most experienced Vacuum Induction Melting Furnace manufacturer in China, ShinTek Vacuum Induction Melting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on… Vacuum Induction Melting Furnace Specifications: Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500 Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5 Load (KG) 10 25 50 100 200 500 1000 1500 Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW Voltage 300V 175V 375V 375V 375V 700V 700V 700V Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz Max. temperature 1600? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 6.7*10-3Pa Leakage rate =4Pa/h Remark: The Vacuum Induction Melting Furnace can be customized for your specific project, and also can be equipped with casting furnace for your melting and casting process. Vacuum Induction Melting Furnace features: (1) Vacuum Induction Melting Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Induction Melting Furnace – Suitable for most of metallurgy industries, can be customized for users; (3) Vacuum Induction Melting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system. (4) Vacuum Induction Melting Furnace – Two feeding method for choose: Manual or Semi-continueous; (5) Vacuum Induction Melting Furnace – Friendly control system.
Electric Heating Thermal Oil Heater Electric heated thermal oil heater is a perfect solutions for factories which are located in places where the electricity is cheaper than fuels. Electrical heated thermal oil boiler only required little maintenance so the running cost can be reduced a lot too. This type of thermal oil heater use the resistive heating working principle, thermic fluid is heated by electric heating elements. It is widely used in liquid and other process heating industry.
Induction cooker.
YLL Chain Grate Biomass Pellet Fired Thermal Oil HeaterYLL Chain Grate Biomass Pellet Fired Thermal Oil Heater takes waste wood and biomass pellet as fuel, the heat transfer oils is heated in the tube first, then the high temperature thermal oil will flow in a closed loop pipes and return to the heaters again, then heat be transfers to other energy equipment in this process. Features of Biomass Fired Thermal Oil Heater 1. Low Working Pressure This biomass fired thermal oil heaters can work under lower pressure, and reach 300? at atmospheric pressure. 2. Accurate Control of Temperature Hot oil and Oil-based thermic fluid are used as heat carrier in the heating system, so it can achieve higher heating. Operator can control the temperature accurately to meet different industry demand. 3. Safe and Reliable Performance Cloth pipes in the furnace top of the boiler, it can protect the furnace top from burning out. 4. High thermal Efficiency The heat transfer fluid flow from the low place to the high place, it is convenient to discharge the gas, so it can improve the thermal efficiency of hot oil boiler. 5. Easy to Clear the Dust The middle ash removal can protect the furnace tube from clogging.
YLW Biomass Wood Fired Thermal Oil Heater A Safer Solution for Industry YLW Biomass waste wood fired thermal oil heaters takes waste wood and biomass pellet as fuel, the heat transfer oils is heated in the tube first, then the fluid thermal oil will flow in the closed circle pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited. A Higher Efficiency Bidragon biomass and wood fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple.
YYL Vertical Oil Gas Thermal Oil Heater YYL Vertical oil/gas fired thermal oil heaters use oil or gas as fuel, the heat transfer oils is heated in the boiler furnace first, then the thermal oil will flow in the closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon Oil/Gas fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Features of Oil/Gas Fired Thermal Oil Heaters 1. High Temperature This Oil/Gas fired thermal oil heaters can reach 320? at low pressure. 2. Easy Operation User friendly designed control system, easy to operate. 3. Low Investment Compared with steam boiler and hot water boiler, thermal oil boiler is perfect to give user high temperature in a much safer way. It cost little in maintenance and daily process. 4. PLC Intelligent Control System The PLC control system of thermal oil heaters is suitable for high temperature and high humidity environment of long-term operation.
YWL Horizontal Coal Fired Thermal Oil Heater Horizontal type coal fired thermal oil heaters use coal as fuel, the heat transfer oils is heated in the tube first, then the fluid thermal oil will flow in the closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon biomass and wood fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Advantage of YLW Coal Fired Thermal Oil Heater 1. Double dense coils installed in the boiler furnace, the heating surface is more sufficient. 2. The theramic oil flow from the low inlet to the high out let, in this way, the produced gas can easily go out of the system. 3. Automatic temperature control system, operator can adjust the temperature precisely and accurately.
YGL Coal Fired Thermal Fluid Heater YGL Coal fired thermal fluid heater can reach high temperature (Max. 320?) at low working pressure. It has stable heating performance and precise humidity control system, It also adpots a complete operating control system and safety monitoring devices.
Heatsink (DP-11Industrial Heatsink) Overall Dimension:165.5X161.5X58.5mm Material:Al Fin+Heatpipes+Cu Base Weight:335g. Industry packing.
aluminum heatsink(DP-1 industy heatsink) Application for: Intel LGA 775 1U Server Technical Parameter: Overall Dimension 240.5X154X8mm Heatsink Material: Al Panel + 5pcs Heatpipes Weight: 748g Main Process: Industry packing.
Heat sink extrusion(dp-2 industry heatsink) Application for: Surface treatment: anodized black Technical parameter: Overall dimension 229x218x18mm Heatsink material: Al panel + copper core Weight: 1142g Main process: Industry packing
OEM heatsink(DP-6 Industrial Heatsink) Technical Parameter: Overall Dimension 125X95X23mm Heatsink Material: Weight: 172g Main Process: industry packing
Extruded aluminum heatsink (DP-7 Industrial Heatsink) We are CPU radiator manufacturer , can supply you all kinds of CPU cooling systerm .We also can supply you the OEM raditor and ODM services.
Heating element The milk-white (pearl-white) quartz glass tube can be manufactured into different shape as circle, pear, U and so on.
Horizontal Gas Thermal Oil Boiler Features of Horizontal Oil/Gas Fired Thermal Oil Boiler 1. Reasonable Structure: Multiple coil structure, Three passes of smoke and flue, weld joint with high quality. 2. Large Heating Furnace: Aopts a large combustion chamber which increases the radiation heating furnace area, this design increase the thermay efficiency and reduce the NOX emissions. 3. High Efficiency: Adopts high thermal resistance insulating layer, increase the heat transfer and thermal efficiency. 4. High Quality Accessories: All accessories such as burners, pumps, water level controller, valves and other instruments are from international or domestic famous brands. 5. Easy Maintenance: The manhole and hand hole is easy for user to maintain. Bidragon also provide life time support for clients. 6. Professional Customized Service: We provide customized service for clients who has specific requirements for the project, including design, produce and install service.
YGW Coal Thermal Fluid Boiler YGW Horizontal Coal Fired Thermal Fluid Boiler General Introduction This series thermal fluid boiler use heat transfer oil as medium. There is a hot oil circulating pump which in order to force the thermic fluid to flow in the closed loop circulation pipe. Then the thermal energy will be transfered to the heated object. The thermal fluid will back to the boiler furnace and be reheated. The YGW thermal fluid boiler can reach high temperature at low working pressure. It adopts advanced control system, equipped with liquid level controller, pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. It is a safe boiler with high efficiency and low power consumption.
