400w landscape type wind generator Controller: built-in micro-controller Wind leaf diameter: 1.15m Leaf: carbon fiber mixture Net weight: 9kg Main parts: reinforced plastic (oxygen melt anti-corrosion protection) Start wind speed: 3.6m/s Total weight: 9.5kg Voltage: 24v dc Generate energy: 384kwh/month (wind speed: 5.4m/s) Rated wind speed: 12.5m/s, may withstand the maximum wind speed of 49.2m/s Rated power: 400w, high-efficiency Overspeed protection: electrical torque control.
Wind wheel diameter: 4/3.5m Rated wind speed: 10m/s Start wind speed: 3m/s Work wind speed: 3 to 25m Safety wind speed: 40m Power rating: 2,000W, (maximum power) 3,000W Rated speed: 400rpm generating forms: permanent magnet 3-phase AC Speed forms: electric yaw Working voltage 220V DC and 240V AC Tower heights: 8m.
Engine brand prime power China weichai 20kw-150kw Cummins 40kw-1000kw Shangchai 50kw-300kw Volvo 75kw-450kw Steyr 64kw-200kw Daewoo 24kw-500kw Mwm 150kw-1500kw Jichai 500kw-1000kw Nantong 75kw-500kw Deutz 180kw -450kw
Wind turbine generator we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality. S43/600KW Wind Generator Sets Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg (Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall (Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg (Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m (Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm (Tower: height 38.5or48.5m/weight 33000 or45800kg (Yaw system :type, active/yaw rate 0.2 S48/750KW Wind Generator Sets Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s (Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall (Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97 (Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm (Tower: height 65m/weight 75000kg different dimensions
Diesel and turbo generators We can provide diesel and turbo generators widely used for stationary and mobile. The diesel generator's capacity varies from 100kw to 2200kw per units. For the turbo generators, the capacity is of 6mw to 200mw. Diesel generator: Model 200gf, 250gf, 300gf and 350gf diesel generating set with capacity of 200kw to 350kw is composed of model n6160 stationary diesel engine, 3-phase synchronous generator and low-voltage control board. It is equipped with protective equipment against overload short-circuit and under-voltage. Diesel engine is coupled by flexible coupling with generator and they are mounted on the common base frame. It's very convenient to user, if the diesel generating set has been needed to install or move. 200kw and 250kw diesel generating set is an ideal emergency power source in small industrial area, enterprise, guesthouse, hospital and public area. Model 500gf diesel generating set with capacity of 500kw is composed of model 6300zd2 stationary diesel engine. Brushless synchronous generator and low-voltage control board, it is equipped with protective equipment against overload, short-circuit and over-voltage, and alarm system giving warning in the event of low lubrication pressure, over-temperature of cooling water and oil. Model 1000gf(1000kw) diesel generating set is composed of model g6300zd6 stationary diesel engine, brushless synchronous generator and high or low-voltage control board.
Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: Model Prod capacity (Nm3/h) O2 purity (%) Outlet pressure (bar) Compressed air Min. (m3/min) Working pressure (bar) Power consumption (KW) STPO-4 4 93+/-3% 1-5 0.86 5.5-7.5 5.43 STPO-5 5 93+/-3% 1-5 1.17 5.5-7.5 7.60 STPO-8 8 93+/-3% 1-5 1.87 5.5-7.5 11.75 STPO-10 10 93+/-3% 1-5 2.33 5.5-7.5 15.75 STPO-15 15 93+/-3% 1-5 3.25 5.5-7.5 19.05 STPO-20 20 93+/-3% 1-5 4.30 5.5-7.5 31.59 STPO-25 25 93+/-3% 1-5 5.80 5.5-7.5 31.59 STPO-30 30 93+/-3% 1-5 7.00 5.5-7.5 39.04 STPO-35 35 93+/-3% 1-5 7.58 5.5-7.5 47.00 STPO-40 40 93+/-3% 1-5 9.30 5.5-7.5 57.70 STPO-45 45 93+/-3% 1-5 10.5 5.5-7.5 57.70 STPO-50 50 93+/-3% 1-5 10.6 5.5-7.5 57.70 STPO-60 60 93+/-3% 1-5 14.0 5.5-7.5 77.70 STPO-65 65 93+/-3% 1-5 15.2 5.5-7.5 92.70 STPO-70 70 93+/-3% 1-5 16.2 5.5-7.5 92.70 STPO-80 80 93+/-3% 1-5 18.7 5.5-7.5 114.5 STPO-90 90 93+/-3% 1-5 20.0 5.5-7.5 114.5 STPO-100 100 93+/-3% 1-5 23.3 5.5-7.5 137.0 STPO-160 160 93+/-3% 1-5 37.4 5.5-7.5 229.0 STPO-200 200 93+/-3% 1-5 46.7 5.5-7.5 274.0 Remark: Above standard model Oxygen Plant is based on an altitude of
Mobile Nitrogen Generator Introduction: The Mobile Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply. ShinTek Mobile Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. It is skid-mounted, container mounted or vehicle mounted per customer’s specific demand. Mobile Nitrogen Generator specifications: 1. Nitrogen production capacity: 10~600Nm3/h 2. Nitrogen purity: 90%, 95%, (Can be customized to 99.99%) 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Nitrogen pressure can be boosted to be as higher as 200bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Nitrogen Generator Features: (1) The Mobile Nitrogen Generator is equipped with a stable screw air compressor; (2) The Mobile Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Mobile Nitrogen Generator more reliable, and less maintenance jobs; (4) The Mobile Nitrogen Generator is skid-mounted or container-mounted or vehicle-mounted; (5) The Mobile Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Mobile Oxygen Generator Introduction: The Mobile Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (ZMS) to separate the Oxygen gas from the air. It is more and more popular used for on-site Oxygen supply, or even for some specific gas station which has to move frequently. ShinTek Mobile Oxygen Generator consists of air compressor, air dryer, air filters, PSA Oxygen generator, optional cylinder filling system and related control system. There are three types for choose: skid-mounted, container mounted or vehicle mounted. Mobile Oxygen Generator specifications: 1. Oxygen production capacity: 5 ~ 100 Nm3/h 2. Oxygen purity: 93+/-3%; 3. Oxygen pressure from the Oxygen Generator: 1-5bar 4. Oxygen pressure can be boosted to be as higher as 150bar per customer’s demand. 5. Skid-mounted, Container mounted, Vehicle mounted; Mobile Oxygen Generator Features: (1) Three types for choose: skid-mounted or container-mounted or vehicle-mounted; (2) The Mobile Oxygen Generator is equipped with a stable screw air compressor; (3) The Mobile Oxygen Generator use Siemens PLC and SMC valves; (4) Fewer moving parts enable the Mobile Oxygen Generator more reliable, and less maintenance jobs; (5) The Mobile Oxygen Generator is very easy to be operated, unmanned operation can be realized; (6) The Mobile Oxygen Generator is energy efficient (0.3 KWH/m3 Oxygen), save energy; (7) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Plant is based on an altitude of
Nitrogen Generator Introduction: The Nitrogen Generator is based on PSA (Pressure Swing Adsorption) Technology, which uses some specific molecular sieves (CMS) to separate the nitrogen gas from the air. It is more and more popular used for on-site nitrogen supply and filling nitrogen cylinders. Our PSA Nitrogen Generator consists of air compressor, air dryer, air filters, PSA nitrogen generator and related control system. The patented vessel design enable our PSA Nitrogen Generator a lowest energy consumption and best efficiency. Nitrogen Generator specifications: 1. Nitrogen production capacity: 2~2000Nm3/h 2. Nitrogen purity: 90%, 99%, 99.5%, 99.9%, 99.99%, 99.999%, 99.9995%... 3. Nitrogen pressure from the Nitrogen Generator: 1-7bar 4. Skid-mounted enable an easy installation and transportation. Nitrogen Generator Features: (1) The Nitrogen Generator is equipped with a stable Atlas Copco screw air compressor; (2) The Nitrogen Generator use Siemens PLC and SMC valves; (3) Fewer moving parts enable the Nitrogen Generator more reliable, and less maintenance jobs; (4) The Nitrogen Generator does not need foundation base; (5) The Nitrogen Generator does not need cooling water; (6) The Nitrogen Generator is skid-mounted, very easy to be transported and installed; (7) The Nitrogen Generator is very easy to be operated, unmanned operation can be realized; (8) The Nitrogen Generator is energy efficient (0.3 KWH/m3 Nitrogen), save energy; (9) The Nitrogen Generator can be used for both onsite application and filling oxygen cylinders. (10) Consumable parts: only filter elements, replaced every 6000-8000hours. Maintenance cost is very low.
Oxygen Generator Introduction: The Oxygen Generator is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Generator consists of air compressor, air dryer, air filters, PSA oxygen generator, and related control system. The patented design enable our PSA Oxygen Generator a lowest energy consumption and best efficiency. Oxygen Generator specifications: 1. Oxygen Production capacity: 2~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Generator: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Generator is based on an altitude of
Name:Circular contours (reflectors) Product Information:Double sides road/ tunnel reflector delineator Item:Delineator Shape:Trapezoid/rectangle/circle Color:Yellow/red/white Material:Steel/aluminum/plastic Size:110mm Weight:250g/pcs Detail:Al-support,two reflectors Reflective mode:PMMA film/reflective film Feature:Good reflection capacity Usage:used as a roadside sign for road,runnel,bridge,circuity road,can fixed on the profile
Engines and generators.
Rfa generator, centrifuge.
Intercom / talk back system (TBS), tele prompter, audio monitor unit, time base corrector / frame synchronizer (TBC), audio/video Switcher (composite/sdi), audio/video distributor (composite/sdi), logo generator.
Petroleum, electric power, electromechanical engineering contracting and optoelectronic.
Electro surgical generator.
Generator set.
Air purifier, ozone and anion generator, integrative accessory.
