Find Verified Ceramic Machine Suppliers, Manufacturers and Wholesalers

Operating Principle By utilizing the production technology of our patent, the filtering plate consisting of two pieces of cavity-structures which is produced mainly by using corundum-based material. The process include raw-material classification, cleaning & selecting, mixing, high-accuracy molding through die stamping, stage-wise high-temperature roasting, repetitious painting of function layer, cleaning & choosing, finalizing gluing, performance testing, packing and placing in storehouse. Repetitious roasting and layer-after-layer painting are adopted. Thus, the arrangement of pores (interior is big, exterior is small) is clear; The resistance at restoring of filtering plate's function is small; The cleaning of filtering plate is easy; The surface layer is of high strength and wear-resistant. The two pieces of cavity-structures are glued together using epoxy glue imported. The gluing is of high strength and is corrosion-resistant & wear-resistant. Features and Applications The ceramic filtering plates produced by our plant have been proved as successful in many beneficiation plants treating ores of copper, lead, zinc, iron, silver, sulfur, gold etc. The filtering plates are of high strength, easy to be cleaned for restoring of plate function. The maximum pressure for reverse cleaning reaches 0.3MPa that increases the performance of reverse cleaning & combined cleaning and raises remarkably the operation indexes of the filter. The service life of the filter exceeds 2 years that saves the investment & operation cost of customer.

Operating principle Driven by the main shaft, the filtering plate rotates to the direction of scraper. Under effect of vacuum system (vacuum pump, filtrate tank, distributor and relevant pipes), the filtering plate below slurry level absorbs the slurry while the filtering plate from slurry level to scraper makes the material (absorbed on it) dry. The filtrate goes into filtrate tank where from it is drained through discharge system (filtrate pump and relevant pipes). When the filtering plate reaches the position of scraper, the cake is taken off by scraper and then given through discharge chute onto conveying belt. After discharge of material, the filtering plate is cleaned in the way of reverse flowing (cleaning takes place once after each circle of rotation). So a few of residue caused by clearance between filtering plate and scraper is cleaned out, and the function of filtering plate is restored during operation. After certain time (normally, 7 hours), it is necessary to clean the filtering plate by means of detergent (normally, it is nitric acid depending on characteristics of material) and ultrasonic. So the materials & foreign matters stopped in pores of filtering plate or absorbed on surface of filtering plate are cleaned out, and the function of filtering plate is restored during operation. The ceramic filter adopts PLC full-automatic control system. Both full-automatic operation and manual operation are possible to provide flexibility & convenience. Features and Applications Compared with traditional filters, it is featured in energy saving, high efficency, low production cost, high automation level, low power consumption, low moisture of filter cake. More importantly, the low suspended solids in filterate enables the ceramic filter easily meet the discharge standards, and customers can use it as circulation water without discharge it outside. It is extensively used for solid liquid separation in such industries as ore beneficiation, metallurgy, chemicals, paper making, coal, environmental protection and so on.

General Information: CMAX Ceramic fiber blanket is made from high quality Gao-ling clay, high purity alumina and silica oxides by spun or blown process. It is asbestos free. No chemical binder is added. Double-size needling provides blanket with great tensile or handling strength for easy installation. Blankets are available in various classified temperature from 1260º C to 1430º C. CMAX ceramic fiber blanket is resistant to most chemicals attack except hydrofluoric Phosphoric acid and high pH alkali(Na2O or K2O). Its thermal and physical properties can not be affected by oil, steam and water. Advantages: Heat reflectance Light weight Low thermal conductivity Low heat storage Flexible Resilient to thermal stock High tensile strength Corrosion resistance Easy to install Asbestos free. Application: Petrochemical process heater refractory fiber lining Heat treating furnace or intermittent (shuttle) kiln hot face lining General furnace backup insulation Heat seals for kiln car or furnace door Electrical insulator High temperature acoustic Fire protection. Non-standard sizes are available upon request. This information, subject to change, is offered solely for your consideration. Users of our products should make their own tests to determine the suitability of each product for their particular purposes. 13x610x14400mm 25x610x7200mm 50x610x3600mm

GENERAL INFORMATION: CMAX ceramic fiber boards are manufactured in a wet vacuum forming process by blending the chopped ceramic fiber with inorganic or organic binders for excellent abrasive resistance at high temperature. CMAX ceramic fiber boards feature low thermal conductivity, high thermal stability and excellent thermal shock resistance. The products are classified as STD, HP, HA and HZ respectively corresponding to different maximum service temperature 1000ºC, 1100ºC, 1200ºC and 1350ºC. Advantages: Low heat storage Low thermal conductivity Excellent abrasive resistance Excellent thermal shock resistance Excellent chemical stability Even density and thickness APPLICATION: Hot air duct lining Shuttle kiln with high gas velocity Laboratory furnace Kiln car insulation Die-cut high temperature seal Based on order, special sizes are available. This information, subject to change, is offered solely for your consideration. Users of our products should make their own tests to determine the suitability of each product for their particular purposes. Nothing contained in this brochure is to be understood as authorization or recommendation to use our products in the infringement of ant patent. 25X600X1000 50X600X1000

1. ceramic fiber blanket : Density (Kg/m3) : 64 . 96 .128 2. Temperature (degree C ) : 1260 1430 1600 3. Thickness (mm) : 13 25 . 50 4.Width (mm) : 610 . 1220 5. Length : 7200 . 7300. 1440 1520 ceramic fiber textiles : Temperature ( degree C) : 1260 Reinforced material : glass fiber . stainless steel wire Type: ceramic fiber yarn . ceramic fiber tape . ceramic fiber rope . ceramic fiber cloth Other thermal insulation products or special requirment will be supplied

Honeycomb ceramic Trend aofu honeycomb ceramic has excellent properties as low coefficient of thermal expansion, high specific surface area, great thermal stability, resistance to acid and alkali etc, which are applicable to extensive industrial process. Trend series of new material honeycomb ceramic products take the key part in environment protecting industry, which includes industrial exhaust gas, waste water, incinerators, rto, rco etc. At the same time, it is the optimal material of heat exchanger, gas stove etc. Trend exported honeycomb ceramic to many countries such as usa, japan, german, korea, indiaíasingapore etc. And all get the excellent performance. Application: Heat storage and exchange system in metallurgy, chemical industry, construction material. Industrial waste gases treatment Nox reduction system for flue gas in electricity plant. Exhaust cleaning system of waste incinerators. Noxious gas purifying in chemical industry and mining. Extruded ceramic filter for foundry industry. Catalyst supports. Catalytic converter substrate. Column packing in chemical industry. Material: Mullite, cordierite, alumina, zirconia, aluminium titanate, silicon carbide, titania, spodumene, stoneware and so on. Shape of holes Square, circle, rectangle, triangle, rhombus, hexagon.

Ceramic jar

Ceramic Fiber Bulk The main raw material are Aluminum oxide and silicon dioxide, which melted in the resistance furnace, after blowing or spun processing, made into the high-performance refractories. The bulk divided into blowing and spun type. The fiber of blowing bulk is short, so it is suitable for processing vacuum moldings, board, paper and so on; the fiber of the spun bulk is long, it is suitable for processing into a variety of high performance and high temperature textiles. Max.Temperature: 1000-1600 Fiber diameter: 4-7um Fiber length: 4-7cm Product Capability: High temperature resistant, low heat conduction rate High Thermal and chemical stability Excellent Sound absorption and sound insulation Less shot, purely white color, light weight, soft and flexible Product application: As a variety of industrial furnace insulation and filling materials using Can be used as high temperature sealing material Cut into short fibers, mixed with high temperature paint to use Can be processed into a textile, special-shaped parts, gasket, composite material and other high temperature products Fire prevention, heat insulation, and so on for the equipment and facilities

Ceramic Fiber Tape Ceramic Fiber Drop Warp Tape (Reinforced with stainless steel wire or glass fiber) It is heat insulation resistant product which is weave into tape shape. Standard Spec: Width: 13mmï¼?300mm (Tape) 25mmï¼?120mm (Drop Warp Tape) Thickness: 1.6-6mm/2-3mm Standard Length: 30m Max temperature: 1260 Product Capability:High temperature resistant, low heat conduction rate High Thermal and chemical stability High tensile strength Light weight, convenient for fine processing and use Product application: fireproof, refractory, thermal insulation for high temperature pipe,heat insulation, sealing for high temperature parts

Ceramic fiber cloth coated Aluminium/Ceramic fiber cloth coated vermiculite (reinforced with stainless steel wire or glass fiber) It is heat insulation resistant product which is weave into cloth shape.Can make into ceramic fiber cloth covered aluminum foil,ceramic fiber cloth coated vermiculite and ceramic fiber cloth with PTFE solution according to customer requirements. Standard Spec: Width:300-1500mm Thickness:1.6-6mm Standard length: 30M Max temperature:1260mm Product Capacity: High temperature resistant Low heat conduction rate High thermal and chemical stability High tensile strength Light weight,convenient for fine processing and use Production application As the external insulation layer for industrial furnaces and other external heat preservation and heat insulation for a variety of mechanical equipment and pipeline. As welding spark cloth for building, ship, large construction equipment industry Fireproof and heat insulation for Rail vehicle,vehicle transportation insulation parts. Can be processed into building fire-proof curtain, fireproof gaarment(covered aluminum), fireproof shoes etc. Notice: Coated ceramic fiber cloth has higher function, such as, temperature resistant,dust-proof,pollution resistance,easy processing.

ceramic fiber yarn (Reinforced with stainless steel wire or glass fiber) It is yarn shape heat insulation resistent product which is made of ceramic fiber bulk, mixed a certain percentage of organic cotton fiber reinforced with fiber glass or stainless steel wire. It can be processed into cloth, tape, sleeve, braided rope, and other high-performance fire-resistant textiles. Standard Spec: 1-5 ply Common Spec:525,630,780,830,1000,2250 Max temperature: 1260 Product Capability:High temperature resistant, low heat conduction rate                              High Thermal and chemical stability Product application: Can produce fire-resistant textiles with various shapes

Making the coal ashto the ceramic pellet. Wooden box

Ceramic fiber blanket core rope with glassfiber yarn or ceramic fiber yarn mesh(Reinforced with stainless steel wire or glass fiber) Standard Spec:Ï?12-150mm Max temperature: 1260 Product Capability: High temperature resistant; Low heat conduction rate; High thermal and chemical stability; Soft and flexible; Convenient construction Production application: Used for high temperature sealing of heating furnace,boiler and various industrial furnace thermal insulation; Energy saving for all kinds of casting equipment.

Ceramic pellet, sinter machinery, sinter machine.

GENERAL INFORMATION: Fireclay bricks are made from clinker clay by mixing, forming, drying, sintering and machining. The Al2O3 content ranges from 36% to 42%. Fireclay bricks feature stable mechanical strength and good thermal shock resistance, withstanding high temperature up to 1750. They are commonly applied as refractory lining directly exposed to heat or backup insulation layer in all kinds of industrial kiln or laboratory furnace. ADVANTAGES: Low thermal conductivity High refractoriness High mechanical strength Excellent thermal shock resistance Non standard sizes and shapes are available upon request APPLICATIONS: Petrochemical process heater Heat treatment furnace Ceramic firing kiln Cement rotary kiln Glass melting tank Backup insulation TECHNICAL DATA: ITEM: ZGN42 GN42 RN42 RN40 RN36 Al2O3 ≥%: 42 42 42 40 36 Fe2O3 ≤%: 1.6 1.7 - - - C.C.S. Mpa≥: 58.8 49 29.4 24.5 19.6 Refractoriness≥ºC: 1750 1750 1750 1730 1690 Permanent Linear Change ≤% 1350ºC x 2hrs: - - - 0~-0.3 0~-0.5 1450ºC x 3hrs: 0~-0.2 0~-0.3 0~-0.4(x 2hrs) - - Refractoriness under Load(0.2 Mpa)≥: 1450 1430 1400 1350 1300 Apparent Porosity ≤%: 15 16 24 24 26 Note: 1) ZGN42 and GN42 are used in blast furnace. 2) RN42, RN 40 and RN 36 are used in hot blast stove. 3) Fireclay bricks can be designed and manufactured upon customers requirements. 230X114X65mm 230x114x76mm

Xm65/25 plastic extruder 1. The application of the equipment: For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext. 2. Technical parameters 1) production scope: the diameter of the conductor: 1-10mm Finished diameter size: 2.5-13mm 2) extrusion capacity: max 80kg/hr 3) motor power: 15kw(frequency conversion) 4) heating power: 16kw(three section heating with air cooler) 5) center height of the machine: 1000 mm 6) pay-off spool specification: diameter 630mm(pn 400-630mm) 7) take-up spool specification: diameter 630mm(double spool) 3. Composition of the equipment 1) 630mm no-spool pay-off 2) elevating tension straightening machine 3) sj65 extruder with auto feeding. 4) water cooling sink 5) dry-printing device 6) diameter measure device 7) 600 mm/ 350mm wheel traction machine 8) 630mm double spool take-up machine 9) control box Standard package.

Tool spec.Max. +150mm Intalled power : 15kw Spindle power : 5.5kw Speed of spindle : 0-3000 r.P.M Speed :x 24m/min y 18 m/min Tool changer : 8*1 Max.Glass : 1200* 2400mm Glass thinkness : 5-30mm Machine dimension : 4060*2030*2120mm

Cnc portable cutting machine Steeltailor, which can cut complex plane figures designed with fastcam software. It is affordable for all small and medium enterprises. We offer a big margin to our dealers. Steeltailor has all the performance of a gantry machine. With its usb port, the data transmission from a pc is as easy as downloading photos from a digital camera. Steeltailor support both oxy-fuel and plasma torch. The effective cutting range: 1200 mm(47¦)x2000 mm( 78¦) (width, length entendable on request) 105kg, 2boxes

Model: ST1220 Designer, Researcher and Manufacturer, Supplier's Supplier Advanced Technology, Excellent Quality Reasonable Price, Thoughtful Service Easy Operation, Powerful Functions Customise according to Your Requests Cutting width:1200mm; Cutting length:2200mm; Effective cutting thickness:Flame cutting 6-150 mm, Plasma cutting 0.1-20mm (Up to the plasma power; Input voltage: 220V Gas depression: Max0.1Mpa Power frequency: 50HZ Oxygen deprission:Max1.5Mpa Rated power:160W Cutting type:plasma/flame Display:5.7inch Total weight:80Kg Industrial machine, machine making, cutting machine, arm of the cnc utting machine is made of stell, as a result ,it is more stable when cutting sheet metals. Portable CNC plasma cutting machine / CNC flame cutting machine is used for cutting metal plate,such as steel plate. Faceful man-machine conversation.The beam can be easily disassembled, easy for packing and shipment. Sealing perfect, dust-proof.,light, smart and portable. 1 The overall processing machine basegood stability, not deformed 2 Using beeline and double-slide lead rails, high accuracy 3 A detachable structural design for arm, convenient transportation and installation; 4 Beautiful structure, coordination, light weight; 5 Machine base is made in steel. 6 CNC control system, SH-2012AH, 7 " color display. The CNC control system has the following character : 1) High reliability, such as anti-plasma jamming, and lightning strike, Surge; 2) 32M users program storage capacity can update to 64M 3) In both English and Chinese interface conversion; 4) During plasma processing, auto-complete the speed control of the corner; 5) Rich software features and practical flame / plasma cutting process; 6) In particular small line section procedure processing can be widely used in metal materials and advertisement, Iron; 7) Dynamic graphics, zoom in 1-8X the graphics, fixed point of automatic tracking; Wooden Case