Construction materials.
Construction materials.
Application: The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows Plaster mortar Skim coat Grout mortars Gypsum plaster. 1.Product description Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2.Specifications Appearance: white free-flowing powder Protective colloid: polyvinyl alcohol Bulk density: 500 ± 100 g/l Particle size: max. 10% over 150 Residue moisture: ≤ 2% Ph value: 7.0 ± 1.0 (50% dispersion in water) Film properties: opaque, flexible Mfft: approx. 0°c Tg : (+6°c) 3.Properties Tiones tm 6012e increases cohesion of binding material and improves performances of Cement based products. It provides pre-mixed mortars with following advantages: Improves workability Improves adhesion strength Improves flexural strength 4. Dosage and handling Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 5.Storage Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month. 20kg/bag.
1. Product specialty: 5100C is urea formaldehyde resin powder as binders special for woodworking processing. It owns high bonding strength, low formaldehyde content as well as ideal water resistance. This powder is suitable for the cold pressing and hot pressing project. 2. Performance index: Item unit description Powder: Appearance -- white powder Moisture content % 1~3 Volatile substance %
Application: Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are: Waterproof mortars Waterproof wall putty (skim coat) Concrete repair mortars Tile grout Non-shrinking grouting material Powder paint 1. Product description: Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents. 2. Specification: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 5% over 150μ m Residue moisture----------------------------------≤ 2% Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties------------------------------------opaque, high flexible Mfft------------------------------------------------approx. 0° c Tg ---------------------------------------------------(-5° c) 3. Properties: Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages: Outstanding water resistance Improves flexibility Improves workability Excellent weatherability and durability Prominent heat resistance Reduces elastic modulus 4. Dosage and handling: Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application. 20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Application: 5200f is suitable for the processing of plywood, particle board, MDF&HDF, multi-ply wood engineer flooring, surface veneering as well as the other wood production. 1. Product specialty: 5200f is melamine modified urea formaldehyde resin powder as binders special for woodworking processing. It owns higher bonding strength, lower formaldehyde content as well as ideal water resistance. This powder is suitable for hot pressing project. 2. Performance index: Item unit description Powder: Appearance -- white powder Moisture content % 1~3 Volatile substance %
Application The typical application field of tiones tm 6021e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows: Eifs adhesive mortar, plaster mortar & anti-cracking mortar Cement-based tile adhesive Tile grouts Grout mortars Repair mortar Gypsum plaster 1. Product description: Tiones tm 6021e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2. Specifications: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 10% over 150μ m Residue moisture----------------------------------≤ 2% Ph value----------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties-------------------------------------opaque, high flexible Mfft-------------------------------------------------approx. 0° c Tg ----------------------------------------------------(+7° c) 3. Properties: Tiones tm 6021e increases cohesion of binding material and improves performances of cement based products. It provides pre-mixed mortars with following advantages: Improves adhesion strength substantially Improves workability Improves crack resistance Improves flexural strength Reduces elastic modulus 4. Dosage and handling: Tiones tm 6021e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 20kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Uses SM-P is recommended strongly for use in all ready-mix, precast, and prestress concrete applications where low water-cement ratio, low permeability, high durability, high strength concrete is specified or high slump flowable concrete is required. SM-P can be applied in various concrete, including high strength concrete, high fluidity concrete, high duration concrete, aluminate cement refractory concrete, grouting material, steam curing concrete, high strength mortar, gypsum products, and so on. Advantages Increase concrete early strength. Promote workability. Increase flowability. Increase cohesiveness and segregation resistance. Shorten mold take-off time. Keep water/cement to a minimum. Promote air stability. Compatible with cements, gypsums and other admixtures. Reduce bleeding at high slumps. Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg It is easy to absorb moisture from air. So it must be kept in original sealed bag and stored at dry condition. The shelf life is one year. This product is non-toxic and non-flammable. So there is no special transportation requirement.
Building material.Export
Cement, construction materials.
Weight nw: 34, 450 kg Max. Load: 14, 000 kg Front bridge load: 16, 600 kg no-load Rear bridge load: 17, 850 kg no-load Front bridge load: 38, 500 kg full load Rear bridge load: 9950 kg full load Operation ability Maxi. Speed Full load, advance / retreat, flat road Gear 1: 4.1 km / h Gear 2: 7.5 km / h Gear 3: 14.3 km / h Gear 4: 26.5 km / h Max. Slope (load): 25% Max. Traction: 330 kn Engine Manufacturer: deutz, germany Model: f12l413fw Manner: 2 stage combustion air-cooling engine Power: 204 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Braking system: hydraulic brake system Workbrake: Design: multi-disk brake pressure hydraulic external liquid cooling operation Parking brake: Design: spring brake hydraulic release Hydraulic system Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506 suodanbishimo, kewobaike Driving system Torque converter Manufacturer: dana, the united states Model: series8000 Design: single-industrial-type hydraulic auxiliary drive system Gear-box Manufacturer: danad, the united states Model: series5000 Design: power shift 4 forward stalls after 4 tuidang Drive bridge Manufacturer: dana, the united states Model: 21 d4354 Design: self-locking rigid bridge with no-spin slide-proof differential speed.
Weight nw, 10000 kg Max. Volume: (sae, stowing), 5.5m3 Maximum load: 10, 000 kg Operation ability Max. Speed Full load, forward / backward, flat road Gear 1: 0-3.5 km / h Gear 2: 0-7.0 km / h Gear 3: 0-13.0 km / h Gear 4: 0-23.0 km / h Max. Slope (full load): 3.3 km / h 25% The greatest traction: 197 kn Engine Manufacturer: deutz, germany Model: bf4m1013c Manner: water-cooling diesel engine Power: 104 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Braking system: dual pipeline hydraulic brake system Wet completely closed multi-disk brake Work brake: Design: multiple disk external liquid cooling hydraulic operation Parking brake design: spring brake hydraulic release Brake pressure: 130-150 bar Driving system Torque converter Manufacturer: dana, the united states Model: c273 Design: single-industrial-type auxiliary drive hydraulic system Gearbox Manufacturer: dai satisfied that the united states (dana) Model: r28000 Design: power gear-shift, 4 forward gears and 4 backward gears Drive bridge: meichi, xuzhou Model: soma c103 Hydrolic system Designed to use imported hydraulic valves, eg. Bosch\ rexroth\ fk506\ suodan\ bishimokewobaike
Weight nw, 255000 kg Max. Volume: (sae, stowing), 15 m3 Max. Load: 25, 000 kg Front bridge load: 14, 950 kg no-load Rear bridge load: 8050 kg no-load Operation ability Max. Speed Load, advance / retreat, flat road Gear 1: 5.0 km / h Gear 2: 11.0 km / h Gear 3: 19.0 km / h Gear 4: 26.0 km / h Max. Slope (load): 3.3 km / h 25% Max. Traction: 231 kn Engine Manufacturer: deutz, germany Model: f10l413fw Manner: 2 stage combustion Air-cooling engine Power: 170 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Braking system: hydraulic brake system Brake work: Design: multiple disk external liquid cooling hydraulic operation Parking brake / emergency brake Design: spring brake hydraulic release Brake pressure: 130-150 bar Driving system Torque converter Manufacturer: dana, the united states Model: c5472 Design: single-industrial-type auxiliary drive hydraulic system Gear-box Manufacturer: dana, the united states Model: r36420 Design: power gear-shift, 4 forward gears and 4 backward gears Drive bridge: Manufacturer: dana, the united states Model: 19 d2748 Designno-spin slide proof self-locking differential speed for front bridge
Weight nw: 25, 300 kg Max. Load: 9500 kg Front bridge load: 11, 800 kg no-load Rear bridge load: 13, 500 kg no-load Front bridge load: 26, 595 kg full load Rear bridge load: 8205 kg full load Operation ability Max. Speed Full load, advance / retreat, flat road Gear 1: 4.0 km / h Gear 2: 8.3 km / h Gear 3: 15.4 km / h Gear 4: 25.0 km / h Max. Slope (load): 25% Max. Traction: 227 kn Engine Manufacturer: deutz, germany Model: f10l413fw Manner: 2 stage combustion air-cooling engine Power: 170 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Braking system: work / hydraulic parking brake system integration With the lifting handle Brake work: Design: multiple disk external liquid cooling hydraulic operation Brake pressure: 110-150 bar Parking brake / emergency brake Design: spring brake hydraulic brake released four security Driving system Torque converter Manufacturer: dana, the united states Model: series8000 Design: single-industrial-type hydraulic auxiliary drive system Gear-box Manufacturer: dana, the united states Model: series32000 Design: power gear-shift, 4 forward gears and 4 backward gears Drive bridge Front bridge Model: d102 Manufacturer: germany kessler (kessler) Rear bridge Manufacturer: kessler, germany Model: d102 Design: with ordinary differential speed
Weight nw: 12500 kg Max. Load: 4000 kg Front bridge load: 5625 kg no-load Rear bridge load: 6875 kg no-load Operation ability Max. Speed Full load, forward / backward, flat road Gear 1: 3.6 km / h Gear 2: 7.6 km / h Gear 3: 12.5 km / h Gear 4: 20 km / h Max. Slope (full load): 14% Max. Traction: 104 kn Engine Manufacturer: deutz, germany Model: f6l912fw Manner: 2 stage combustion air-cooling engine Power: 63 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Design: multiple disk external liquid cooling hydraulic operation Brake pressure: 110-138 bar Parking brake / emergency brake Design: spring brake hydraulic release Hydraulic system Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506, suodan, bishimokewobaike Driving system Torque converter Manufacturer: dana, the united states Model: c272 Design: single-industrial-type auxiliary drive hydraulic system Gear-box Manufacturer: dana, the united states Model: r28421 Design: power gear-shift 4 forward gears and 4 backward gears Drive bridge: meichi, xuzhou Model: q150 Design: no-spin slide proof self-locking differential speed for front bridge, ordinary differential speed for rear bridge
I am Beijing Nimble bitumen membrane equipment CO.LT.We are mainly specialized in research,development and manufacture of equipment for bitumen membrane.Our company was established in 1991.It acts as the leading supplier of equipment for bitumen membrane in China, and a newborn force in international equipment industry for bitumen membrane.Beijing Nimble waterproofing membrane Corporation had focused on offering quality goods and on-time service,We can according to customer requirement to produce different types equipment from the small equipment to ten million ©O . Until now, we had served hundreds of customer from more than 10 countries in the world. Our equipment has exported to India,Russia,UKrine,Saudi Arabia ,North Korea,and We have a branch company In India now. ART 1 General information Technical parameters 1Production capacity: annual production of modified bitumen membranes of 3 million Sqm (16 hours/day, 300days/year with two shifts) Reinforcement: Polyester, Glass fibre Modified materials : SBS, APP 4Materials for surface: sand, scraps of stone, PE membrane, aluminum foil, etc. 5Specification of products: Width: 1m, thickness: 2-5mm, length: 7.5 or 10m 6Production speed: 0-20m/min¡£ 7Main workshop: 60¡Á (12-15) ¡Á£¨6-8£©m Labor required 5-7 workers are needed for the whole production line Boiler room: 2workers Modified workshop: 1-2 workers Production workshop: 2-3 workers Utilities Electricity: Alternating current, 380V50Hz60Hz Water Consumption: 2-3 T/D
Performance: Waterproof - hydrostatic head 15000mmh2o Water vapor permeable - WVTR 10000g/m2.24hr Windproof - keeping warm Air permeable - permeability rate 50mm/s Temperature resistant - can be used by -150 ~ +260 Fire retardant - limited oxygen index 95 Chemical inert - resistant in most chemical Germproof Washing resistant Application: Special using clothes (army, protective, etc.) Outdoor-sport (outdoor-jacket & -shoe) Filtration materials (air filter bag) Industrial sealant (gaskets, etc.) Image transmission cable for army Industrial products in fields of biology, electron, medicine, etc. Waterproof & breathable panty liner and diaper Waterproof construction materials. Membrane size Width1650, 1750, 2200mm Length700~3400m (as requirements).
Product Description : Yuhong SPU-301 one component polyurethane waterproofing coating is a kind of coating made by polymerization of isocyanate and polyether polyols, with addition of a variety of aids and fillers. It is applied on substrates to form a firm, soft, seamless sealing film by chemical reaction through, CNCO end group contacted with moisture in air. Features; It has one component which is easy to apply. The different types fits different applications. It hasstrong adhesion, high strength and elongation, good elasticity, good high temperature and low temperature resistance, which make it fit to shrinkage and crack of substrates. It has no benzene or coal tar, so it makes no pollution to environment. Application Range; It could be widely used in all kinds of moisture-resist and waterproofing projects, such as underground project, swimming pools, bathroom, balcony, parking lot and kitchen, as well as for non-exposed roof. Construction Method; Application Process: application preparation; substrate treatment and clean; additional waterproofing for details; application for roof; sealing of end joints and edge;application of protection or separation layers. Substrate treatment: the substrate should be smooth, solid, clean, dry without sharp concave and convex, honeycomb, pocking marks, peeling free of bulge, greasy, apply sealant to concave around pipe root and do additional waterproofing layer in cracks. Additional waterproofing layer: for details, such as concave and convex corners, pipe root, apply additional waterproofing layer, using type II to cracks, coat for 2;4 times(the thickness is about 1mm). Apply waterproofing layer to roof deck: can coat for 2-3 times with scraper, but one coat is allowed too. When the first coat isnt sticky, can apply the second coat, the second coat should be vertical with the first coat. The batter coating rate is 2.0kg/m2for thickness of 1.5mm.
Brand waterproof membrane of elastomer (SBS) modified asphalt is a kind of windable sheet waterproof material, which adopts styrene-butadiene-styrene (SBS) modified asphalt as a dipping and covering modifier, whose upper surface is coated by PE film, fine sand, mineral granules or aluminum foil, copper foils or other isolating materials. Features Spunbonded polyester fiber membrane;aintegrated advantage properties of spunbonded polyester substrates and SBS modified asphalt, wonderful integrated properties. It could form waterproof layer, which has high strength and good property to stand against water pressure; High tensile strength and elongation rate, strong adaptability for substrate shrinking distortion and cracks; Good high and low temperature resistance, could keep its functions at -50; and be used in cold or hot areas, especially in cold areas; Resistance to puncture, pressing and rubbing, tearing, and wearing; Good resistance to corrosion, mildew and weathering; Good construction performance, with firm and enduring joints. Application Range It could be widely used in all kinds of waterproof engineering projects in all fields, especially in the following types of engineering projects: All kinds of building roofs engineering projects, exposed, non-exposed, heat preservation, non-heat preservation, planting building roofs and roof parking lots; All kinds of underground waterproof or damp proof engineering projects; Bridge surfaces of subways, tunnels, concrete roads, sewage treatment and garbage burying projects; water spraying pools, swimming pools, penstocks, water pools, and so on.
Yuhong Brand HCA-102 Acrylic Roofing Waterproof Coating is processed with 100% pure acrylic elastic emulsion as base material, mixed with high-grade pigment and varieties of carefully-chosen accessory ingredients. The product is excellent flexibility, bonding power and anti-ultraviolet radiation performance and applies to directly-exposed roofing waterproof project. Features 100% pure acrylic elastic emulsion is base material. Outstanding outdoor durability and anti-ultraviolet radiation. Outstanding cohesiveness, applicable to steel structure base, cement mortar or concrete base, etc. Durable low-temperature flexibility, crack-free bending under -30; low temperature. Excellent elasticity. Environmental water paint, pollution free. Liquid state, cold process, safe and easy. Application Range; Apply to directly exposed roofing waterproof project. Conformation Points; Waterproof base: steel structure base, cement mortar or concrete base, internal and external angles should be in the form of circular arch, internal angle diameter should be bigger than 50mm, external angle diameter bigger than 10mm. For base cracks and grooves at the pipe end, sealing material should be filled and addition waterproof treatment should be made. Film-coated waterproof layer: in case of multi-coating protection, thickness of each film coating should not be smaller than 1.5mm; for one-coating protection, thickness should not be smaller than 2mm. It can be separate film-coated waterproof conformation, and a layer of base reinforcement material can also be added according to actual engineering situation or design requirements. Attention for construction; Appropriate construction temperature is between, construction is not suitable in rainy days or there is water on the base. Before hard dying of the film coating, waling on the waterproof layer is strictly forbidden, and protect it from damages.
