Sheet, bar, wire, target, forging, etc. )(material are titanium, nickel, tungsten, molybdenum, tantalum, niobium, zirconium and their alloys)..
Titanium, Nickel. Hasteloy, Monel Alloy, Inconel Pipe Fittings, Flanges. Pipe Fitings. Machining Parts And Equipment, Heat Exchangers, Tanks, Towers, Reactors, Flters, Diverters, Pumps, Valves, Pipeline Flters. Anode Plate, Non Ferrous Metal Products Such As Bars, Plates, Pipes, Wires, Folsand Fasteners., Forging, Stamping, Cutting, Welding, Pipe Fitings, Surface Treatment, Machiningx Ray Detection,Ultrasonic Thickness Gauge And Other Dozens Of Processing And Testing Equipment..
GR1 titanium plate is a high-purity titanium material extensively employed in diverse fields. GR1 represents the grade or material level of the titanium alloy, also identified as pure titanium Grade 1. It comprises pure titanium with a purity exceeding 99.5%, making it among the purest commercially available titanium. GR1 titanium plate displays exceptional physical and chemical properties. Additionally, it exhibits favorable thermal conductivity and a low coefficient of thermal expansion, ensuring stability in high-temperature environments. This enables it to endure stress under conditions of elevated temperature and pressure while preserving its structural integrity and performance. Commercial Pure Titanium (also referred to as CP Ti or commercial pure titanium) is commonly employed in grades GR1 (TA1) and GR2 (TA2). It is a dense titanium metal with at least 99% titanium content with minor impurities including iron, carbon, oxygen, nitrogen, and hydrogen. Among these impurities, oxygen, nitrogen, and iron exert the most significant influence on the mechanical properties of pure titanium, with oxygen being particularly impactful. Even a 0.01% oxygen content can substantially enhance its strength. The interaction between hydrogen and titanium is reversible, and the primary effect of hydrogen on titanium's performance is "hydrogen embrittlement." Consequently, it is typically mandated that the hydrogen content does not exceed 0.015%. Commercial pure titanium generally contains 0.03%-0.08% oxygen and 0.03%-0.05% nitrogen. Specification: Size:100*100*1.0mm Grade: GR1 Standard: ASTM B265 Surface Finishes: Brushed What are the surfaces of titanium plates? The surface of titanium plate can be treated and processed differently, with the following common surface treatments: 1. Untreated surface: The original surface of titanium plate is usually untreated and keeps its natural state. This surface usually has a smooth metallic luster. 2. Pickled surface: Titanium plate can be pickled to remove surface oxides and impurities to improve its purity and surface quality. Pickled surface is smoother and cleaner, suitable for applications with high surface requirements. 3. Polished surface: The surface of titanium plate can be polished by mechanical or chemical methods to give it a very smooth and mirror-like appearance. Polished surface is widely used in decoration, electronics and high-end industrial fields. 4. Anodized surface: Anodized surface of different colors and textures can be obtained by forming an oxide layer on the surface of titanium plate. This treatment method can increase the corrosion resistance of titanium plates and provide more decorative options. 5. Sandblasting surface: Through high-pressure sandblasting, a fine grit effect can be formed on the surface of titanium plates. Sandblasting surfaces are often used to increase the roughness of titanium plates, provide better adhesion, or for decorative purposes.
With the rapid advancement of technology, particularly in aerospace and other related industries, the demand for titanium metal has significantly increased. However, this has also resulted in a substantial amount of titanium metal scrap. As a result, the recovery of titanium metal scrap has become crucial in conserving resources and reducing costs. Titanium scrap comes from various sources, such as during the production of sponge titanium. The upper skin, bottom, and sides of sponge titanium may be contaminated by impurities like iron, chlorine, oxygen, and nitrogen. These impurities make the titanium scrap unsuitable for manufacturing and must be recycled. Additionally, titanium ingot casting and processing titanium materials into titanium products also generate titanium scrap. To recycle titanium metal scrap, the following methods can be employed: High-quality uncontaminated titanium scrap can be utilized as an additive for smelting titanium ingots or mixed with sponge titanium to produce titanium blocks. Waste titanium sponges, heads, and scraps can be utilized as alloy additives in the ferrotitanium industry or raw materials for titanium powder, depending on their purity and composition. Waste titanium powder can be utilized as deflagration agents in the pyrotechnic sector, additives in the processing of aluminum, and raw materials for titanium products made using powder metallurgy. Titanium scrap with numerous impurities can be processed into high-titanium iron. What is the process for recycling titanium scrap? The process of recycling titanium scrap typically involves the following steps: Collection and sorting: Titanium scrap is collected from various sources, such as manufacturing facilities, aerospace companies, and medical facilities. The scrap is then sorted based on its composition and quality. Cleaning and preparation: The titanium scrap is cleaned and prepared for processing. This may involve removing any impurities, such as oil or dirt, and cutting the scrap into smaller pieces. Melting: The titanium scrap is melted in a furnace at high temperatures. This process helps to separate titanium from any other metals or materials that may be present. Refining: The melted titanium is refined to remove any remaining impurities and improve its quality. This may involve adding other materials, such as aluminum or vanadium, to improve the properties of the titanium. Forming: The refined titanium is then formed into various shapes and products, such as sheets, bars, or wire. These products can be used in a wide range of applications, including aerospace, medical, and automotive industries.
With the rapid advancement of technology, particularly in aerospace and other related industries, the demand for titanium metal has significantly increased. However, this has also resulted in a substantial amount of titanium metal scrap. As a result, the recovery of titanium metal scrap has become crucial in conserving resources and reducing costs. Titanium scrap comes from various sources, such as during the production of sponge titanium. The upper skin, bottom, and sides of sponge titanium may be contaminated by impurities like iron, chlorine, oxygen, and nitrogen. These impurities make the titanium scrap unsuitable for manufacturing and must be recycled. Additionally, titanium ingot casting and processing titanium materials into titanium products also generate titanium scrap. To recycle titanium metal scrap, the following methods can be employed: High-quality uncontaminated titanium scrap can be utilized as an additive for smelting titanium ingots or mixed with sponge titanium to produce titanium blocks. Waste titanium sponges, heads, and scraps can be utilized as alloy additives in the ferrotitanium industry or raw materials for titanium powder, depending on their purity and composition. Waste titanium powder can be utilized as deflagration agents in the pyrotechnic sector, additives in the processing of aluminum, and raw materials for titanium products made using powder metallurgy. Titanium scrap with numerous impurities can be processed into high-titanium iron. What is the process for recycling titanium scrap? The process of recycling titanium scrap typically involves the following steps: Collection and sorting: Titanium scrap is collected from various sources, such as manufacturing facilities, aerospace companies, and medical facilities. The scrap is then sorted based on its composition and quality. Cleaning and preparation: The titanium scrap is cleaned and prepared for processing. This may involve removing any impurities, such as oil or dirt, and cutting the scrap into smaller pieces. Melting: The titanium scrap is melted in a furnace at high temperatures. This process helps to separate titanium from any other metals or materials that may be present. Refining: The melted titanium is refined to remove any remaining impurities and improve its quality. This may involve adding other materials, such as aluminum or vanadium, to improve the properties of the titanium. Forming: The refined titanium is then formed into various shapes and products, such as sheets, bars, or wire. These products can be used in a wide range of applications, including aerospace, medical, and automotive industries.
Titanium electrode plate for water treatment is a platinum group noble metal oxide with high electrocatalytic performance, strong oxidation resistance and good electrical conductivity coated on a pure titanium substrate, which is an insoluble anode. Product parameters Product name: Titanium electrode plate for water treatment Brand: TOPTITECH Product base material: Gr1 pure titanium Product coating: Ru/Ir/Pt (ruthenium iridium platinum) Product process: nano coating - high temperature sintering Specifications: customized according to customer requirements Product performance: 1. It has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; The plates is sintered at high temperature, so the surface particles are not easy to fall off; in the air the temperature in use can reach 300�°C; 2. It is suitable for filtering various corrosive media, such as: weak hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium; 3. It has excellent mechanical properties, can be machined for cutting, welding, etc., has high compressive strength, and the internal pressure breaking strength is as high as 0.3MPa; 4. The regeneration method is simple and can be reused after regeneration. Applications 1.Production of sodium hypochlorite via electrolysis in the chlorate and chlor-alkali industries In the production of chlor-alkali, pure saturated salt water is used as electrolytic solution, titanium electrode is used as anode, and asbestos wool attached to iron mesh is used as cathode. The anode chamber produces chlorine gas, and the cathode chamber produces hydrogen gas and sodium hydroxide. After purification, it is widely used in various industries. in industrial production. 2. Electrolyzed functional water Water that has been artificially treated to achieve a variety of beneficial purposes is referred to as functional water. With its high practicability, good sterilization effect, and lack of secondary pollution, electrolyzed water is a well-liked sterilization treatment technique. Titanium electrodes, which are frequently used in electrolyzed water machines, are used to electrolyze drinking water or trace salt water in order to generate functional water. 3. Cathodic protection In the ocean, ship hull, bridge and other steel use environments, due to the corrosion of impurities in the steel and micro-batteries, coupled with the complex natural environment, although corrosion-resistant alloy steel is selected and the thickness of the material is increased to coat excellent corrosion-resistant paint, these The corrosion of structures is still very serious, which poses a great threat to safe production, and cathodic protection is a convenient and important measure to effectively protect permanent steel structures in the ocean.
Sintered porous titanium disc is a type of porous titanium filter element. It is manufactured using industrial high-purity titanium powder (99.6% purity, with 0.4% consisting of titanium alloy elements such as nitrogen, hydrogen, iron, manganese, etc.). The production process involves sieving, cold isostatic pressing, and high-temperature, high-vacuum sintering. At TOPTITECH, our porous metal titanium discs are the preferred choice for gas diffusion layers and electrode plates in high-performance electrolyzers and fuel cells. These discs exhibit uniform porosity, excellent strength, and enhanced corrosion resistance, resulting in superior overall performance. Additionally, our porous titanium plates are available in various operating temperatures suitable for fuel cells. Furthermore, they can be coated with platinum or other catalyst layers to further enhance performance. Specifications: - Size: 178*1.6mm - Pore Size: 10 microns - Material: pure titanium powder(GR1) - Temperature Resistance: up to 300â?? - Porosity: 30%-40% Feature 1. Superior Porosity: The disc exhibits a uniform and controlled porosity, allowing for efficient and precise filtration. This enables the disc to effectively trap and remove impurities, particulate matter, and contaminants from gases or liquids. 2. Strength and Durability: The manufacturing process involving cold isostatic pressing and high-temperature sintering results in a structurally robust and durable disc. It can withstand high pressures and maintain its integrity even in demanding operating conditions. 3. Corrosion Resistance: Titanium, known for its exceptional corrosion resistance, ensures that the porous disc remains unaffected by corrosive environments. This extends the disc's lifespan and ensures consistent filtration performance over time. 4. Versatility in Applications: The porous titanium disc finds extensive use in various industries and applications. It is commonly employed in gas diffusion layers and electrode plates for high-performance electrolyzers and fuel cells. Additionally, it is utilized in industries such as chemical processing, pharmaceuticals, food and beverage, and environmental monitoring.
Versatile Monel Alloy Filter Plates for Precision Filtration Needs, made from high-purity Monel alloy powder and formed through a sintering process to create a solid filter plate with a fine porous structure. These filter plates not only possess high filtration efficiency to capture and separate tiny solid particles and impurities, but also exhibit excellent corrosion resistance, high-temperature performance, strength, and wear resistance. Our product is versatile in the field of precision filtration and finds wide applications in the filtration, separation, and purification processes of both liquids and gases. Parameter Material: monel alloy Diameter: 120mm Thickness: 2.0mm Pore size:2um Technique: sintering What is monel alloy? Monel alloy is a nickel-copper alloy composed of about 67% to 70% nickel and 30% to 33% copper, and also contains small amounts of iron, manganese, silicon and carbon. It is named after American chemist Alfred Monel. Product features 1.Excellent Corrosion Resistance 2.High-Temperature Performance, Strength, and Wear Resistance 3.Versatility in Precision Filtration Application 1.Water Treatment: These filter plates are effective in water treatment plants, providing reliable filtration and separation of impurities, sediments, and contaminants from drinking water, wastewater, and industrial water systems. 2.Food and Beverage Processing: Versatile Monel Alloy Filter Plates find applications in the food and beverage industry for filtration of liquids, such as juices, syrups, and sauces, to remove particles, clarify liquids, and ensure product quality and safety. 3.Chemical Processing: These filter plates are used in various chemical processes, including chemical synthesis, catalyst recovery, and solvent filtration, assisting in maintaining product purity and preventing contamination. 4.Mining and Metallurgy: Versatile Monel Alloy Filter Plates are employed in mining and metallurgical operations for filtration and separation of ores, concentrates, and slurries, facilitating the extraction of valuable metals and minerals. 5.Environmental Remediation: These filter plates can be applied in environmental remediation projects, such as groundwater treatment, soil remediation, and air pollution control, helping to remove pollutants and contaminants from the environment.
Product Introduction Nickel foam plate is a type of porous material made from nickel metal. It consists of a three-dimensional network of interconnected nickel fibers or filaments that form a highly porous structure. The foam-like structure of nickel foam plate provides a large surface area, high porosity, and good electrical conductivity, making it useful for various applications in fields such as energy storage, catalysis, filtration, and aerospace. Nickel foam plates can be produced through various methods such as electroplating, chemical vapor deposition, and powder metallurgy. The thickness, porosity, and pore size of the foam can be tailored to suit specific applications. In energy storage, for example, nickel foam plates are used as electrode materials in batteries and supercapacitors, where their high surface area and porosity allow for efficient charge and discharge cycles. Infiltration, nickel foam plates can be used as a porous filter medium for liquid or gas filtration. Product parameter Material: Nickel Aperture: 0.3mm-7mm(can customized) Porosity: 63%-90% The Max Sound Absorption Coefficient: 0.8 Bulk Density: 0.27-1.08 g/cm3 Size: Customized Feature 1. Quality and light: maximum surface area, specific gravity 0.2 to 0.3, 1/10 of water, and wood, aluminum, and iron. 2. The porous construction has an extensive frequency range of sound absorption. 3. Electronic wave shield: It is protected by a 90 dB or so thick electronic wave that is rather thin. 4. Processing performance: It is easily adhered, decreased, and bent. 5. High temperature fire resistance: The stable form burns at a high temperature but is difficult to burn. 6. The ability to filter: The uniform three-dimensional network structure produces a filtering effect and permits extremely robust gas and fluid flow stability.
The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M³/M²hKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filter 2. Orifice plate material for gas distribution fluidized bed 3. Filtration, washing and drying of materials in the pharmaceutical industry 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. The main features are as follows: 1. Strong plasticity. 2. Uniform pore size distribution. 3. Long service life. 4. Strong corrosion resistance. 5. High-temperature resistance. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace.
Product Introduction TC4 titanium rod for aviation, also known as TC4 titanium alloy rod, Gr5 titanium rod, or Ti-6Al-4V titanium rod, the composition of titanium alloy TC4 material is Ti-6AI-4V, which belongs to (a²) type titanium alloy , with good comprehensive mechanical and mechanical properties. It has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other departments. TC4 titanium rods for aviation are mainly used in petroleum exploration equipment accessories, aerospace, shipbuilding, titanium processing parts for automobiles, standard parts, customized parts, etc., with high strength, good toughness, excellent welding performance, and wide application. Product parameters Product name: TC4 titanium rod, TC4 titanium alloy rod for aviation 1. Grade National standard: TA1, TA2, TA3, TA9, TA10, TC4, TA18, ERTI-1, ERTI-2, Ti15333 American Standard: GR1, GR2, GR3, GR5, GR7, GR12, GR5, GR9 2. Manufacturing process: hot forging + turning (grinding) light 3. Delivery status R (hot working state) M (annealing state) 4. Diameter (mm): 1-200 5. Implementation standards: GB/T 2965, GB/T13810, ASTM B348, ASTM F136, ASTM F67, AMS 4928 Features Titanium rods have excellent properties such as high strength, good corrosion resistance, good low temperature performance, high chemical activity, and low thermal conductivity. Mechanical properties of TC4 titanium alloy: 1. Tensile strength b/MP 895, specified residual elongation stress 0.2/MPa 825, elongation 10, reduction of area 25 2. Density of titanium alloy: 4.5 (g/cm3), working temperature -100 550 3. TC4 titanium alloy chemical composition: TC4 contains titanium (Ti) balance, iron (Fe)
Sintered titanium powder filter with a flange connector is a kind of porous filter element which is made of industrial high-purity titanium, after sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy to ensure filtration accuracy, and easy regeneration. It is suitable for the filtration of various corrosive media, such as hydroxide, seawater, aqua regia and the filtration of chloride solutions such as iron, copper, and sodium. Product name:Sintered titanium powder filter with flange connector Specifications:OD20 WT2.5-3.0 L200mm Filtering accuracy:30um Connector:Flange connector Packaging: Standard export wooden case or according to the customer's request Delivery: By sea & Air Shipping & International Express Lead time: Generally around 3-7 days for sample,7-15 working days for order, it's according to quantity. Advantage 1, Uniform structure, narrow pore size distribution, high separation efficiency. 2, High porosity, low filtration resistance, high penetration efficiency. 3, High temperature resistance, Normally can be sued up to 280 degrees. 4, Good chemical stability, acid and alkali corrosion, antioxidant properties. Applications 1. pharmaceutical industry, such as infusion, small injections, eye drops, oral liquid the filtration before the end. 2. impurity filter, decarbonization filter and precision filter during the productuon of medicine. 3. Security filter for UF system, RO system and EDI system in water treatment, and filtration after ozone sterilization. 4. Food and beverage industry such as drinks, juice, wine, beer, vegetable oil, mineral water, soy sauce etc.filtration. Packing and Delivery: In order to protect them from rubbing,make them wrapped with plastic bags respectively. kraft paper is used to fasten the plates together,protect them from scattering. Putting the foam in the wooden cartoon to protect them better while shipping. Finally put the goods into wooden cases.
1.Product description: The difference from chemically pure titanium is that industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and various other impurity elements (such as iron, silicon, etc.), which is essentially a titanium alloy with low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to the inclusion of more impurity elements, and its mechanical and chemical properties are similar to those of stainless steel (but still lower in strength compared to titanium alloys). 2.The characteristics of industrial pure titanium bars are: low strength, but good plasticity, easy processing, stamping, welding, and good machinability; in the atmosphere, seawater, wet chlorine and oxidizing, neutral, weakly reducing media Good corrosion resistance and oxidation resistance are better than most austenitic stainless steels; but the heat resistance is poor, and the operating temperature should not be too high. 3.Industrial pure titanium bar is mainly used for working temperature below 350 â??, with little stress, but requires good plastic stamping parts and corrosion-resistant structural parts, such as: aircraft skeleton, skin, engine accessories; seawater corrosion-resistant pipes for ships, Valves, pumps and hydrofoils, parts of seawater desalination systems; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.
flower gift Chinese traditional arts and crafts straw painting can be used room Ornament pendant business gift chinese handicraft art 1.Description Straw painting, is the court crafts began in the Sui and Tang dynasties. Straw to go through: "smoked,steamed, floating,scraping, pushing, ironing and scissors, engraving, editing, painting and other processes, according to the luster of wheat straw itself, straw painting has a shiny translucent, decorative effect, artistic appeal and so on. Production out of characters, flowers and birds, animals lifelike, vivid, giving a simple and natural,beauty of elegant. 2. Company information Shaanxi Beauty Arts & Crafts Co., Ltd is mainly engaged in the development, design, production and processing of folk-customs characteristics crafts gifts,such as clay sculpture,mascara masks,Opera masks, shuttle masks, paper cuttings, shadow puppets and wheat straw paintings. Fengxiang clay for our main products, the product has repeatedly participated in the World Expo and CCTV Spring Festival Galaâ??s mascot and issued by stamps, and foreign people spoke highly of these. The clay sculpture "Tiger" and other four works by the Chinese Mini- stry of Culture awarded the "Chinese folk artistry". There are many kinds of specifications and patterns for straw painting at present. The topics covered many aspects such as ancient people, modern people, landscapes, flowers, birds, cartoons, animals and Buddhism culture.With modern and antique style, solid color and color process. The company insists on the development under the background of non-material culture, as a service target to promote the development of folk culture in Shaanxi. The products we can accept OEM, according to drawings processing. We adhere to since- rity, honesty, innovation, and many friends to establish a long-term and stable business relationship. 5. We are process as per customer drawing or pictures, if you are interested in our products,pls contact with me.
Versatile Monel Alloy Filter Plates for Precision Filtration Needs, made from high-purity Monel alloy powder and formed through a sintering process to create a solid filter plate with a fine porous structure. These filter plates not only possess high filtration efficiency to capture and separate tiny solid particles and impurities, but also exhibit excellent corrosion resistance, high-temperature performance, strength, and wear resistance. Our product is versatile in the field of precision filtration and finds wide applications in the filtration, separation, and purification processes of both liquids and gases. Due to being constructed with high-purity Monel alloy powder, our filter plates can operate stably for extended periods in various corrosive media, including industries such as chemical, petrochemical, food and beverage, and water treatment. Furthermore, their high-temperature performance enables continuous operation in elevated-temperature environments without deformation or failure. Our product ensures highly accurate filtration results, guaranteeing product quality and consistency. Additionally, our filter plates can be applied in areas such as high-temperature gas filtration, catalyst protection, and environmental remediation, providing comprehensive solutions to our customers' needs. Parameter Material: monel alloy Diameter: 120mm Thickness: 2.0mm Pore size:2um Technique: sintering What is monel alloy? Monel alloy is a nickel-copper alloy composed of about 67% to 70% nickel and 30% to 33% copper, and also contains small amounts of iron, manganese, silicon and carbon. It is named after American chemist Alfred Monel. Monel has many excellent properties that make it widely used in various applications. The following are some characteristics of Monel alloy: Corrosion resistance: Monel alloy has high corrosion resistance to many corrosive media, including sea water, acid, alkali and salt. High Strength: Although Monel is a non-ferrous alloy, it has high strength and hardness. Good processing performance: Monel alloy can be formed and processed by various processing methods, such as cold working, hot working, and welding. Wear resistance: Monel alloy has good wear resistance properties, making it suitable for high friction and high wear environments. Magnetic properties: Monel alloy has low magnetic permeability, so it is very useful for applications that are sensitive to magnetism.
Nickel foam plate is a type of porous material made from nickel metal. It consists of a three-dimensional network of interconnected nickel fibers or filaments that form a highly porous structure. The foam-like structure of nickel foam plate provides a large surface area, high porosity, and good electrical conductivity, making it useful for various applications in fields such as energy storage, catalysis, filtration, and aerospace. Product parameter Material: Nickel Aperture: 0.3mm-7mm(can customized) Porosity: 63%-90% The Max Sound Absorption Coefficient: â?¥0.8 Bulk Density: 0.27-1.08 g/cm3 Size: Customized Feature 1. Quality and light: maximum surface area, specific gravity 0.2 to 0.3, 1/10 of water, and wood, aluminum, and iron. 2. The porous construction has an extensive frequency range of sound absorption. 3. Electronic wave shield: It is protected by a 90 dB or so thick electronic wave that is rather thin. 4. Processing performance: It is easily adhered, decreased, and bent. 5. High temperature fire resistance: The stable form burns at a high temperature but is difficult to burn. 6. The ability to filter: The uniform three-dimensional network structure produces a filtering effect and permits extremely robust gas and fluid flow stability. Application 1.Nickel foam plate is a sound-absorbing material with excellent performance, which has a high sound absorption coefficient at high frequencies; the sound absorption performance at low frequencies can be improved through the design of the sound-absorbing structure. 2.Battery electrode material Nickel foam plate is the most common material used for battery electrodes, particularly for NiMH batteries. These rechargeable batteries are frequently found in hybrid cars, laptop computers, cell phones, electric scooters, and bicycles. 3. Fuel cell Foamed nickel can be used as an electrocatalyst for molten carbonate fuel cells, which typically operate at temperatures between 550 and 700 �° C. For proton exchange membrane production cells (PEMFC), electrode relay feeders for solid oxide fuel cells (SOFC), and electrode materials for electrolysis (as in water electrolytic settings), nickel foam plate can be utilized. Additionally, more surface area can be employed to produce syngas and hydrogen for fuel cells. 4. Other applications Magnetic flux conductors of magnetic particles in a fluid can be treated using nickel foam plate as a filter material. Applications to heat exchange medium and hydrogen storage media are among the further uses.
Titanium rod filter element is a porous filter element made of industrial high-purity titanium, which is formed by sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has outstanding qualities such as corrosion resistance, high temperature resistance, high strength, ease of filtration accuracy assurance, and ease of regeneration. It is suitable for the filtration of various corrosive media, such as: hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium. Technical Parameters Filtration accuracy: 0.22um-100um Porosity: 30-40% Air permeability: 0.02-20M3cm/m2h Compressive strength: 0.5-1.5Mpa Temperature resistance: 280C (wet state) Maximum working pressure difference: 0.6Mpa Diameter: 30mm 50mm 60mm Length: 5 inches 10 inches 20 inches 30 inches 40 inches Interface form: M20 M30 222 226 DFPD (double flat port) Filtration accuracy: 0.45m, 1m, 3m, 5m, 10m, 20m, 30m, 50m, 80m, 100m Features 1. High temperature resistance Generally, it can be used normally under 280 degrees. 2. Uniform and stable precision Uniform structure, narrow pore size distribution, high separation efficiency, high porosity, low filtration resistance, high penetration efficiency. 3. Resistance to corrosion Chemical stability, acid and alkali corrosion resistance, and oxidation resistance are all strengths. 4.A large filter area In accordance with food hygiene and pharmaceutical GHP criteria, there is no particle shedding and no secondary polluting of the original solution. 5. Longevity It is easy to clean, can be regenerated online, and has a long service life (generally several times that of membrane filter elements). Applications 1. It is employed in the pharmaceutical business for decarbonization filtration in the concentrated preparation of big infusions, tiny injections, eye drops, and oral liquids, as well as security filtration prior to terminal filtration in diluted preparations. 2. Impurity removal and filtration in the raw material production process, decarbonization filtration, and fine filtration of materials. 3. Ultrafiltration, RO, and EDI security filtration in the water treatment business, as well as filtration following ozone sterilization and ozone aeration. 4. Clarification and filtering of beverages, liquor, beer, vegetable oil, mineral water, soy sauce, and vinegar. 5. Filtration and recovery of ultrafine fine particles and catalysts, precision filtration following resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. are all processes used in the chemical industry to decarbonize liquid products, liquid raw materials, and pharmaceutical intermediates.
Products Description The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M/MhKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filterï¼? 2. Orifice plate material for gas distribution fluidized bedï¼? 3. Filtration, washing and drying of materials in the pharmaceutical industryï¼? 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace. Note: 1. During the rolling process, the pressure of the rolling mill is very important, which affects the air permeability of the board. Yinggao has the personnel to carry out pressure rolling to ensure the air permeability is qualified. 2. The sintering time in the vacuum sintering process affects the service life of the board, so sufficient and appropriate sintering time is the key process of the sintering process.
Customized cylinder titanium filter tube cartridge is a new type of high-efficiency porous filter material made of metal� titanium powder� as the raw material through powder sieving, cold isostatic pressing molding, sintering, mechanical welding processing, etc., because its pores and filtration accuracy can be carried out in a wide range Adjustment is widely used in the fields of self-lubrication, filtration, separation, catalysis, flame extinguishing, heat exchange, thermal electron generation, and gas distribution. Brand: TopTiTech Origin: Baoji, China Material: Titanium Main purpose: used for gas and liquid filtration and gas distribution. Filtration accuracy: 0.2-50�¼m Diameter: 30-80mm Length: 100-1000mm (special specifications can be customized) Filtration principle: Customized cylinder titanium filter tube is a porous titanium metal filter material made by powder metallurgy. Its internal pores are curved and crisscrossed. The pore size distribution is uniform. The filtration mechanism is typical of deep filtration. Performance: This product has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy filter accuracy, and easy regeneration; the titanium filter is formed by titanium powder formed and sintered at high temperature, so the surface particles are not easy to fall off; in the air the use temperature can reach 500-600â??; it is suitable for the filtration of various corrosive media, such as hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia, and iron, copper, sodium, and other chloride solutions; It has excellent mechanical properties, and can be cut, welded, and another machining; high compressive strength, internal pressure damage strength up to 2MPa or more; 7. its filtration accuracy is easy to ensure, even if it works under high temperature and pressure, the pore size will not be deformed; the porosity is up to 35-45, the pore size distribution is uniform, the dirt holding capacity is large; the regeneration method is simple and can be reused after regeneration. Application Liquids or gases filtration in high temperature and pressure; Filtration of liquids or gases containing ozone; Prefiltration and decarbonization in pharmaceuticals industry, as a small injection, oral, etc ; Highly corrosive liquid and gas purification.
1. non ferrous materials including titanium/nickel bars, tubes, sheets; 2. metals clad materials including titanium/steel clad plate, nickel/steel clad plate, copper/steel clad plate, steel/steel clad plate, aluminum/steel clad plate, zirconium/titanium/steel clad plate; 3. non standard equipments including titanium condensers, titanium crystallization separator, titanium falling film separator, titanium mother tank, titanium heat exchanger, titanium evaporator, titanium/nickel reactor, nickel evaporator, nickel heat exchanger; 4. processing parts including titanium coiled pipe, titanium centrifugal machine, titanium mother plate, titanium basket, titanium standard parts, titanium pipe fittings, titanium polymerizer, titanium dechlorinating tower, tower internals, titanium welded pipes, and so on. the products are widely used in petroleum, chemical, fertilizer, pharmaceutical, light industry, electric power, environmental protection, metallurgy and other industrial departments..
