Find Verified Titanium Bar Suppliers, Manufacturers and Wholesalers

Item name

Gr2 titanium bar


Standard

Astmb348, astmf67, atstmf136


Material

Gr2


Available materials

Gr1, gr2.Gr3, gr4, gr5(ti-6al-4v), gr5eli, ti-6al7nb(new material)


Specification(dia*length)

8x100mm(customized is ok)


Certificates

Iso9001:2000


Shape

Round bar, square /flat bar, hexagonal bar, rectangle bar


Technics

Hot or cold rolling or annealed


Application

Industrial, medical, aviation, military, salt-making,

Petrochemical, metallurgy, electronics , chemical, etc


Packaging

Standard export case



Plywood case

1.Technology:cold rolling, hot rolling
2.Surface treatment:pickling, bright




1:dia.:0.8-350mm, length:<8000mm,
Or we can produce accoding to your requirement
2:astm b348

1.Standard:astm b348
2.Dimension:dia.:0.8-350mm, length:<8000mm,
Or we can produce accoding to your requirement
3.Package: plastic bags and form paper as inside, wooden case as outside
4.Lead time:about 7~15days after receive your advance payment

(according the quatity)




Shipping terms: we offer air shipping(like dhl, ups, fedex, tnt or plain air shipping) and shipping by sea.All will be decided by your quantity.Shipping cost and shipping speed are the primary thing when we considering shipping.

1.Surface treatment:pickling, bright
2.Technology:cold rolling, hot rolling
3.Application :fishing, aerospace, vacuum make the salt,
Auto industry, medical and sports, textile industry





1.Standard:astm b348
2.Dimension:dia.:0.8-350mm, length:<8000mm,
Or we can produce accoding to your requirement
3.Package: plastic bags and form paper as inside, wooden case as outside

Shipping terms: we offer air shipping(like dhl, ups, fedex, tnt or plain air shipping) and shipping by sea.All will be decided by your quantity.Shipping cost and shipping speed are the primary thing when we considering shipping.

Titanium bar.

Wooden box.

Titanium Bar/Rod
Type :forged /rolled
Shape:round ,square ,flat ,hex
Material: Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12
Standard :ASTM B348, AMS4928,ASTM F136, ASTM F67,ISO5832-2/3, ISO5832-11
Dia:1.0-300mm
Length:20-3000mm
Application:industrial and medical.




Wooden case.

Commercial pure titanium, GR1, 2, 3, 4, 3.0 - 50.8 mm, hot rolled, annealed, centerless ground surface.

1. Standard:ASTM B348,ASTM F67,ASTM F136,AMS 4928
2. Certificate:ISO 9001,SGS report,Material and test report.
3. Chemical requirements
NCHFeOAlVPaMoNiTi
Gr 10.030.080.0150.200.18/////bal
Gr 20.030.080.0150.300.25/////bal
Gr 30.050.080.0150.300.35/////bal
Gr 40.050.080.0150.500.40/////bal
Gr 50.050.080.0150.400.205.5~6.753.5~4.5///bal
Gr 70.030.080.0150.300.25//0.12~0.25//bal
Gr 90.030.080.0150.250.152.5~3.52.0~3.0///bal
Gr120.030.080.0150.300.25///0.2~0.40.6~0.9bal
4. Tensile requirements
gradeTensile strength(min)Yeild strength(min)Elongation(%)
ksiMPaksiMPa
1352402013824
2503454027520
3654505538018
4805507048315
513089512082810
7503454027520
9906207043815
12704385034518
5. Available Size
Products NamesDiamesions(mm)StatusGradeStandards
Titanium and Titanium Alloy Bars¦µ£¨30¡«220£©¡Á¡Ü3000ForgedGR1,GR2,GR3,GR4,
GR5,GR7,GR9,GR12,GR23ASTM B348
ASTM F67
ASTM F136
AMS 4928
¦µ£¨6¡«60£©¡Á¡Ü4000Milled.



Inner packing:waterproof paper
Outer packing:wooden case.

Titanium bar

We can supply gr1 gr2 gr5 gr7 gr9 gr11 titanium bars titanium rods and titanium plates

Product brief introduction:
1.GR2 titanium block is one of titanium forging, which has low-weight, high specific strength, widely used in aorespace, chemistry,etc.
2.Payment terms: T/T, L/C.
3.Delivery time: 3-5 days.
Features of titanium blocks:
1.High specific strength. The density of titanium is 4.51g/cm�³, which is higher than that of aluminum but lower than that of steel, copper and nickel, but its strength is much higher than that of other metals. The screws made of titanium alloy are light and strong.
2. Good corrosion resistance. Titanium and titanium alloys are stable in many media, and titanium alloy screws can be used in various corrosive environments.
3. Good heat resistance and low temperature resistance. Titanium alloy screws can work normally in a high temperature environment of 600 �° C and a low temperature of minus 250 �° C, and can maintain their own shape without changing.
4. Non-magnetic and non-toxic. Titanium is a non-magnetic metal and will not be magnetized in a large magnetic field; it is not only non-toxic, but also has good compatibility with the human body.

1.Product description: The difference from chemically pure titanium is that industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and various other impurity elements (such as iron, silicon, etc.), which is essentially a titanium alloy with low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to the inclusion of more impurity elements, and its mechanical and chemical properties are similar to those of stainless steel (but still lower in strength compared to titanium alloys).

2.The characteristics of industrial pure titanium bars are:
low strength, but good plasticity, easy processing, stamping, welding, and good machinability; in the atmosphere, seawater, wet chlorine and oxidizing, neutral, weakly reducing media Good corrosion resistance and oxidation resistance are better than most austenitic stainless steels; but the heat resistance is poor, and the operating temperature should not be too high.

3.Industrial pure titanium bar is mainly used for working temperature below 350 â??, with little stress, but requires good plastic stamping parts and corrosion-resistant structural parts, such as: aircraft skeleton, skin, engine accessories; seawater corrosion-resistant pipes for ships, Valves, pumps and hydrofoils, parts of seawater desalination systems; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.

Etermetal supply titanium and titanium alloy balls which are solid inside, not hollow ones. The popular material is cp grade 2 titanium and titanium alloy grade 5 ti 6Al-4V.

Sizes available: from diameter 1mm to 25mm, bigger sizes make to order


When the titanium balls are used as jewelry, drill hole service is often needed. The through hole diameter is usually from 0.8mm to 4.5mm according to buyer's design.

If the weight of the ball needs to be lighter, hollow titanium balls is suggested. When ordering, please tell us the diameter of the hollow ball you want, we will suggest the stock size for you. Please do not hesitate contact us for more information.

Titanium Clad Plate Titanium Clad Bar

Specification: titanium bar

Grade: Gr1, Gr2, Gr3,Gr5(6AL-4V), Gr7,Gr12

Application: medical industry

OD25 Tc titanium bar is mainly used in mask machine ,and has a crazy sales in both home and abroad.

Titanium rod ï¼?titanium bar
with diameter from 2mm to200mm length max 6000mm.
Moqï¼?5kgs

Product Name: Titanium bars
Grade: GR5, GR1 GR2, Gr9, Gr12, etc.
Standard:ASTM B348, ASTM F67, ASTM F136
Size :Dia6.0-400mm
Length: 5-6000 mm (customer tbd)
Application: Industry / Medical
Color: Ti Natural
Technique: Forged, Rolled
Density: 4.51g/cm ³
Surface:Polished/Pickling

Name: Titanium Rod and Bar
Standard Industry: GB/T 2965 , ASTM B348
Medical: ASTM F67, ATSTM F136, ISO 5832-2, ISO5832-3
Aerospace: AMS4911 4928
Grade:TA1, TA2, TA3, TA4, TC4, TC4 ELI, Ti-6AL7Nb (new materialsï¼?Gr1, Gr2, Gr3, Gr4, Gr5(Ti-6Al-4V), Gr5ELI(Gr23).
Specification:Diameter 6-20mm*Length 2500-3000mm or according to customers requirements.
Certification: ISO9001:2008, Three party certification
Tolerance: H7-H10
Appearance: Rod/Bar
Status: M/Y/T
Application: Equipment accessories,airplane, ship, bicycle, motorcycle, auto, medical, implant, chemical, wheelchair, sports, anchor, weapon Smelting,etc.Aerospace,Industry,Navigation,Chemical,Implants, and so on.
Packing: Plastic with Standard Wooden Carton.
MOQ: 100kg
Delivery Time 10~15 Work Days
Capacity: 10T/M
Payment: T/T 30% in advance and the balance before delivery.

Name: Titanium Rod and Bar
Standard Industry: GB/T 2965 , ASTM B348
Medical: ASTM F67, ATSTM F136, ISO 5832-2, ISO5832-3
Aerospace: AMS4911 4928
Grade:TA1, TA2, TA3, TA4, TC4, TC4 ELI, Ti-6AL7Nb (new materialsï¼?Gr1, Gr2, Gr3, Gr4, Gr5(Ti-6Al-4V), Gr5ELI(Gr23).
Specification:Diameter 6-20mm*Length 2500-3000mm or according to customers requirements.
Certification: ISO9001:2008, Three party certification
Tolerance: H7-H10
Appearance: Rod/Bar
Status: M/Y/T
Application: Equipment accessories,airplane, ship, bicycle, motorcycle, auto, medical, implant, chemical, wheelchair, sports, anchor, weapon Smelting,etc.Aerospace,Industry,Navigation,Chemical,Implants, and so on.
Packing: Plastic with Standard Wooden Carton.
MOQ: 100kg
Delivery Time 10~15 Work Days
Capacity: 10T/M
Payment: T/T 30% in advance and the balance before delivery.