Please click here to check who's online and chat with them.

Find Verified Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Shenzhen   -   Guangzhou  
Dec-01-06
Supplier From China
Dec-07-06
 
Wind turbine

Specifications :
Rated output power: 500w
Rotor blade diameter: 2.7m
Start up wind speed: 2.5m/s
Rated wind speed: 7m/s
Max output: 1000w
Output voltage: ac 220v dc 28v
Generator weight: 6.5kg
Temperature: +45pc
Speed protection: tower leaned


Four parts
VERIFIED
Feb-16-22
 
The COVID-19 RT-PCR Detection Kit is a real-time RT-PCR test intended for the qualitative detection of nucleic acid from the SARS-CoV-2 in upper and lower respiratory specimens (such as anterior nasal swabs, mid-turbinate nasal swabs, nasopharyngeal swabs, oropharyngeal swabs, sputum, lower respiratory tract aspirates, bronchoalveolar lavage, and nasopharyngeal wash/aspirate or nasal
aspirate) from individuals suspected of COVID-19 by their healthcare provider. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments (CLIA) of 1988, 42 U.S.C.
263a, to perform high complexity tests.
Results are for the identification of SARS-CoV-2 RNA. The SARS-CoV-2 RNA is generally detectable in upper and lower respiratory specimens during the acute phase of infection. Positive results are indicative of the presence of SARS-CoV-2 RNA; clinical correlation with patient history and other diagnostic information is necessary to determine patient infective status. The agent detected may not be
the definite cause of disease. Positive results do not rule out bacterial co-infection with other viruses.
Laboratories within the United States and its territories are required to report all positive results to the appropriate public health authorities.
Negative results do not preclude SARS-CoV-2 infection and should not be used as the sole basis for patient management decisions. Negative results must be combined with clinical observations, patient history, and epidemiological information.
The COVID-19 RT-PCR Detection Kit is intended for use by qualified trained clinical laboratory personnel specifically instructed and trained in the techniques of real-time PCR and in vitro diagnostic procedures. The COVID-19 RT-PCR Detection Kit is only for use under the Food and Drug Administration's Emergency Use Authorization.

PRINCIPLE OF DETECTION
This product is a fluorescent probe-based Taqman RT-PCR assay system. Firstly, the RNA of SARS-CoV-2 will be reverse transcribed into cDNA by reverse transcriptase, and then PCR amplification will be performed with cDNA as template. During amplification of the template, the TaqMan probe will
be degraded due to the 5'-3 polymerase activity and exonuclease activity of Taq DNA polymerase, then the separation of fluorescent reporter and quencher enables the fluorescent signal to be detected by instrument. The ORF1ab gene of SARS-CoV-2 will be detected qualitatively by FAM channel, the N
gene of SARS-CoV-2 will be detected qualitatively by JOE channel, the E gene of SARS-CoV-2 will be detected qualitatively by ROX channel, and the internal reference will be detected by CY5 channel.
dUTP and UNG enzyme are used in the kit to prevent contamination of the amplified products.
Internal reference is used in the kit for quality control starting from sample collection
Oct-08-22
Supplier From China
Dec-07-06
 
2000w wind generator

Green energy---2000w wind generator
Specifications:
Rated output power: 2000w
Rotor blade diameter: 3.6m
Start up wind speed: 3.5m/s
Rated wind speed: 9m/s
Max output: 3500w
Output voltage: ac 220v dc 70v/140v
Generator weight: 25kg
Temperature: +45pc
Speed protection: tower leaned

Four parts
46 Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers
Short on time? Let Turbines Generator Transformers Tg Auxiliaries Non Destructi sellers contact you.
Dec-07-06
 
Wind generator

With the purpose of benefiting the worldwide people, we have been developing a green energy installment-wind generator. Nearly 30 years' hard working , our company has developed a leading professional supllier in this area, with the mature sizes 350w/500w/1000w/2000w/5000w and so on.
Our product has the following technique features:
Extreme small structure
Low wind start
Low rated wind speed
Quick output in low wind
Wide wind speed ranges
Reliable speed restriction
Stable quiet running


Four parts
Dec-12-06
 
5000w wind generator

Rated output power: 5000w
Rotor blade diameter: 6.5m
Start up wind speed: 4.0m/s
Rated wind speed: 10m/s
Output voltage: 220/280
Generator weight: 70kgs
Temperature: f+45f¦
Speed protection: tower leaned



Non-fumigated and non-distilled veneer case, the four parts independently packed
Dec-11-06
 
350W wind generator

Rated output power: 350W
Rotor blade diameter: 2.5m
Start up wind speed: 2.5m/s
Rated wind speed: 6.5m/s
Max output: fª700w
Output voltage: AC 220V DC 28V
Generator weight: 5kg
Temperature: f+45f¦
Speed protection: tower leaned
All the systems are easy to install and maintain.
Any other request, please do let us know.
Dec-11-06
 
5000w wind generator

Rated output power: 5000W
Rotor blade diameter: 6.5m
Start up wind speed: 4.0m/s
Rated wind speed: 10m/s
Output voltage: 220/280
Generator weight: 70KGS
Temperature: f+45f¦
Speed protection: tower leaned
All the systems are easy to install and maintain.
If you have interest in our wind generator, please do contact with us.
Sincerely look forward to having a further business relationship with you.
Dec-04-23
Supplier From China
Mar-03-21
Supplier From China
Mar-12-21
Supplier From China
Supplier Of Wooden Office Tables   |   Multifunction Chairs   |   Wigs, Human Hair, Artificial Hair   |   Uniforms   |   Other Ladies Dresses   |   Kitchen Towels   |   Solar Power System   |   Shoes (Personal)   |   Electric Home Appliances   |   Tyre Scrap   |   Mineral Powder   |   Baby High Chair   |   Electronics - Entertainment   |   Tractors   |   Water Filters, Water Treatment Plants   |   Trucks, Tippers, Buses   |   Water Coolers, Water Dispensers   |   Diesel Generators   |   Solar Heaters   |   Fabricated Houses   |   Mosquito Nets   |   Floor Tiles   |   Prefabricated Booths   |   Construction Materials   |   Mining Machinery, Equipments & Spare Parts   |   Toilet Seats   |   Wall Tiles   |   Chimney/Range Hood   |   Tables, Chairs & Sofa   |   Tiles   |   Advertising Equipments & Materials   |   Automotive Batteries   |   Slippers   |   Cars, Trucks, Buses   |   Porcelain Tiles   |   Suitcases   |   Ceramic Tiles   |   PP (Polypropylene) Plastic Bags   |   Electric Power Generators   |   Helmets & Face Masks   |   Truck Parts   |   Electric Water Purifiers   |   Car Accessories   |   Diesel Engines   |   Steel Tire Wire Scrap   |   Mobile Phone Batteries & Chargers   |   Modular Office Tables   |   Towels, Napkins & Aprons   |   Tiger Nuts   |   Kaolin   |   Ceramic Tiles   |   Raw Cotton Fabric   |   Traveling Bags   |   Projectors, Projector Screens & Accessories   |   Cosmetics & Beauty Products   |   Soaps & Detergents   |   Quartz   |   Plastic Carrier Bags   |   Feldspar   |   Hand Wash   |   Body Lotion   |   Washing Machines   |   Towels   |   Multi Purpose Tables   |   Solar Lights   |   Used Clothings   |   Police & Military Uniforms   |   Sleeping Bags   |   Baby Toys   |   Non Woven Fabric   |   Sandals   |   Touch Screen/LCD Monitors   |   Mobile Phone Accessories   |   Toilet Paper   |   Sport Shoes   |   Hand Towels   |   Light Emitting Diode   |   Solar LED Street Lights   |   Street Lights & Lamps   |   Beach Towels   |   Polypropylene Fabric (PP Fabric)   |   Leather Shoes   |   Wedding Dresses & Accessories   |   White Rice   |   Knitted & Woven Garments   |   Director Tables   |   Executive Office Tables   |   Gift Items   |   Knitted & Woven Fabrics   |   Discussion Tables   |   Christmas Tree & Decoratives   |   Terry Towels   |   Solar Batteries   |   Office Tables   |   Bath Towels   |   Pain Relieving Balms & Oils   |   Car Parts   |   Clothing & Accessories   |   Solar Power Equipments   |   Solar Panels   |   Modular Office Chairs   |   Batteries & Chargers   |   Liquid Hand Wash
Sep-24-07
 
Scm series s super thin mill

This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks.
Features and Benefits
* High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill.
* High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year.
* High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts.
* Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Structural Characteristic
The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.


Model: SCM6015
Roller number: 15
Diameter (mm): »600
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 350-2500
Overall dimension (m): 10x2x5.5

Model: SCM8021
Roller number: 21
Diameter (mm): »800
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 600-4000
Overall dimension (m): 12.4x2.x5.8

Model: SCM1027
Roller number: 27
Diameter (mm): »1000
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 900-6000
Overall dimension (m): 14.5x3.8x6.3

Note: This specification is just reference, any changes are subject to the products.

5. SCM series S super thin mill
Technological advantages:
SBM VSI crusher incorporates three crushing styles; its feeding style incoporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field.
Excellent performance and long service time:
1.special light oil lubracation systems ensures the temperature to be within 25f¦
2.brand new automatic protection device provides the machine with vibrating, oil filtering and warning system;
3.new type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time;
4.choice wearble materials prolong the service time of the machine by 40%. So the cost is lowerd by more than 40%.
Model: VSI7611 ; VSI8518; VSI9526; VSI1140

Model:VSI 7611
Capacity (t/h): Feed both at center and at sides:120-180; Feed at center:60-90
Max feed size (mm): soft material ·+35; hard material·+30
Rotation speed (r/min): 1700-1890
Power (kw) : 110-150
Overall dimension L*W*H (mm) : 3700*2150*2100
Weight (t) : 7.8

Model: VSI8518
Capacity (t/h): Feed both at center and at sides: 200-260; Feed at center: 100-130
Max feed size (mm): soft material·+40 ; hard material·+35
Rotation speed (r/min): 1520-1690
Power (kw) : 180-220
Overall dimension L*W*H (mm) : 4140*2280*2425
Weight (t) : 10.3

Model: 9526
Capacity (t/h): Feed both at center and at sides: 300-380; Feed at center:150-190
Max feed size (mm): soft material·+45 hard material·+40
Rotation speed (r/min): 1360-1510
Power (kw) : 264-320
Overall dimension L*W*H (mm) : 4560*2447*2778
Weight (t) :16

Model:VSI1140
Capacity (t/h): Feed both at center and at sides:450-520 ; Feed at center: 225-260
Max feed size (mm): soft material·+50 hard material·+45
Rotation speed (r/min): 1180-1310
Power (kw) : 400-440
Overall dimension L*W*H (mm) : 5000*2700*3300
Weight (t) :25.6
Mar-23-21
 
1. Features

TSJA series Oil-immersed, induction voltage regulator can be loading cases, stepless, smooth, continuously adjust the output voltage. Mainly used for electrical appliances test, electric furnace temperature control, rectifier equipment, generator excitation industry used, it has the following features:



The non-contact adjustment and long service life;
Suitable for all kinds f the nature of the load;
Strong overload capacity;
Reliable running, convenient operation and maintenance.


2. Applications

This series mainly applied to electrical appliances test, electric furnace temperature contro, rectifier equipment, generator excitation etc. In mechanical manufacture, chemical, texitile, communications, military industry etc. industry are also widely used.
May-14-21
Supplier From China
Mar-10-22
 
ABB PP874

The most common temperature sensors are: motor sizes IEC180 225: thermal switch (e.g. Klixon) motor sizes IEC200 250 and larger: PTC or Pt100.See the firmware manual for more information on the motor thermal protection, andthe connection and use of the temperature sensors.Protection against short-circuit in the motor cableThe drive protects the motor cable and motor in a short-circuit situation when themotor cable is dimensioned according to the
Mar-10-22
 
ABB PCO 011

To meet the European Union Directives, according to standard EN 60204-1, Safetyof Machinery, the disconnecting device must be one of the following types:â?¢ switch-disconnector of utilization category AC-23B (EN 60947-3)â?¢ disconnector that has an auxiliary contact that in all cases causes switchingdevices to break the load circuit before the opening of the main contacts of thedisconnector (EN 60947-3) circuit breaker suitable for isolation in accordance with EN 60947-2.
Mar-10-22
 
AO895 3BSC690087R1


Only one permanent magnet motor can be connected to the inverter output.It is recommended to install a safety switch between the permanent magnet motorand the drive output. The switch is needed to isolate the motor during anymaintenance work on the drive.Planning the electrical installationSupply connectionDisconnecting deviceInstall a hand-operated input disconnecting device between the AC power sourceand the drive. The dis-connecting device must be of a type that can be locked to theopen position for installation and maintenance work.
Oct-25-21
 
item no.: 57160001-ADF
lead time: 2-3 days
product orgin: Switzerland
brand: ABB
shipping port: Xiamen
payment: T/T and Western Union.
price: $1/9999
market price: $999
price range: 1-50/888$
color: metal colour
ABB DSDP170 57160001-ADF
Please check if anything interested to you and if quote need.


New option PROFINET Fieldbus Adapter is added to section
Replacement of fieldbus adapter in the computer unit DSQC
639.
New option PROFINET master/slave is added to section
Replacements of PCI boards in computer unit DSQC 639.
New option Euromap II upgrade option 671-4 added in section
Installation of add-ons.
Filter time for safety stop AS/GS/SS is added in section The
MOTORS ON/MOTORS OFF circuit on page 68.
Instructions how to replace the brake resistor bleeder in the Dual
Cabinet Controller, Drive Module is added to section
Repacement of brake resistor bleeder.




Pls notice as below when inquiry:
A:ALL quote are basic on EX-WORK
B:Lead time:2-3 days
C:Delivery time: 5-7 days
D:Payment Term:T/T
E:ship to you via DHL/TNT/UPS/EMS/Fedex.
Oct-22-21
 
item no.:12P2536X062
lead time:2-3 working days
product orgin:USA
brand:Emerson
shipping port:xiamen
payment:T/T and Western Union
price:$121/1200
market price:$900
price range:1-78/908$
color:metal color
46 Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers
Short on time? Let Turbines Generator Transformers Tg Auxiliaries Non Destructi sellers contact you.