Silicone rubber.
Sbr, Pbr, Br9000, Polyisoprene, Nbr, Epdm Rubber.
Material butyl rubber: Thickness: 05mm-2mm Width 4mm-100mm Length 5m10m15m20m Colloid color black, white, gray or color Executive standard JC / t942-2004 Store in a dry and ventilated environment and avoid long-term storage at a temperature above 45 â??. Product Features : A. The tire base is sandwiched in the middle, which has high bonding strength and tensile strength, good elasticity and elongation, and is suitable for interface change and It has strong cracking adaptability and excellent following ability for the deformation of objects. B .excellent chemical resistance, weather resistance and corrosion resistance. C.Excellent adhesion, waterproof, sealing and high and low temperature resistance, and good dimensional stability. D.It is environmentally friendly, non-toxic and tasteless, and the construction operation process is simple. Product purpose: (1. )The overlapping sealing of polymer waterproof coiled material is 7cm / 8cm, which is the common width. Sealing and waterproof treatment of construction joints of subway tunnel structure in municipal engineering. (2). Air tightness, waterproof and shock absorption treatment of color profiled plate joints and sunshine plate works. (3) . Bonding and sealing treatment for steel structure construction. (4) Bonding and sealing treatment in automobile assembly. (5). Insulating glass inner channel sealing.
NR material
Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Crankshaft assemble AH1301010200 AH36001-02.00 Oil seal ring AH1301010405 AH36001-04.21 Adapter connectorZG2-1/2â?³ AH1001010807 AH33001-08A.07 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Crankshaft assemble AH1601010100 AH37001-01.00 O-ring �?190�?3.55 530301011900035507 GB3452.1-82 Short circuitZG2-1/2â?³-NPT2-1/2 AH1001010808 AH36001-08C.04 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Pinion Shaft assemble AH1301010300 AH36001-03.00 Two-lip seal 5"X6.25"X0.625" AH1301010406 AH36001-04.08A Flexible pipe �¦22�?�¦37 AH1001010180001 L=1500 Exhaust filter assembly AH0501011400 AH35004-11.00 Inner ring AH0501010204 AH35001-02.04 Pinion Shaft assemble AH1601010200 AH37001-02.00 Locking spring AH1301010407 AH36001-04.13 Gladhand �¦22�?�¦37 AH100101080900 AH33001-08.18.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Inner ring AH0801010204 AH34001-02.04A Crossing Head Assemble AH1301010400 AH36001-04.00 Splash guard AH1301010408 AH36001-04.10 90�°Elbow NPT1â?³ AH1001010810 AH33001-08.16 Cross head assembly AH0501010400 AH35001-04.00 Inner ring AH1001010204 AH33001-02.04 Hydraulic End Assemble AH1301010500 AH36001-05A.00 Extension rod AH1301010409 AH36001-04.11 Adapter connector NPT2-1/2³ AH0801020801 AH34001-08B.07 Cross head assembly AH0801010400 AH34001-04.00 Outer ring AH050101020500 AH35001-02.05.00 Power end lubrication assembly AH1301010600 AH36001-06C.00 Crosshead pin AH1301010410 AH36001-04.12A Sealing washer AH1001010814 AH36001-08B.09 Cross head assembly AH1001010400 AH1001010400 Outer ring AH080101020500 AH34001-05.00 Base Seat AH1301010700 AH36001-07K.00 O-ring �?160�?7 530301011250070000 GB3452.1.-82 NPT1â?³Flange AH1001010815 AH36001-08B.10 Pinion shaft assembly AH0501010300 AH35001-03.00 Outer ring AH100101020500 AH33001-02.05.00 Spray Pump Assembly AH1301010800 AH36001-08C.00 Bolt M20�?65 T502-6005K T52-6005K Bead apex A-3708 140301012031500000 GB1171-74 Pinion shaft assembly AH0801010300 AH34001-03.00 connecting rod AH0501010206 AH35001-02.06 Sealing washer AH10010109 AH33001-09 Sealing gasket AH1301010411 AH36001-04.15 Flexible pipe �¦38�?�¦53 AH100101080002 �¦38�?�¦53-L=750 Pinion shaft assembly AH1001010300 AH33001-03.00 connecting rod AH0801010206 AH34001-02.06 Breather Cap T515-1001.00 T515-1001.00 O-ring 160�?7 530301011600070000 GB3452.1-82 90 Elbow
Crane rail pad MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track. Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
Crane rail pad MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track. Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
Synthetic rubber sheet.
Rubber Sheets.
Silicon rubber sheet.
Rubber auxiliaries.
Dow EPDM nordel.
Rubber sheets and rubber granules.
Rubber o rings.
Pu rubber roller, rubber roller.
Rubber powder.
Rubber Roller.
Rubber grommets.
Rubber molded parts.
Rubber Sheets.
