Forged Steel Gate Valve API 602 Gate Valve Flanged Raised Face NPT Or BSPT Ends  B.W Or S.W Ends Solid Wedged Type Bolted Or Welded Cover API 6D & CE Certified Forged steel gate valves Glofa produced which sizes are 3â?³(DN80) and smaller, compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances.Forged steel gate valve Glofa offered have superior properties of heat preservation and cold preservation, the valveâ??s bore diameter are same as the pipelines and the medium flows in straight lines, resulting in that the resistance force are small and could prevent the heat losing effectively, this type valve are better choice for the fluid which is easy to solidify and with higher viscosity Glofaâ?? forged steel gate valve is with wedged type sealing structure, it is sealed by the wedge compressing on the seat, this sealing type make it possible unaffected by the pipeline pressure difference. The forged steel gate valve Glofa design are with self-cleaning structure, the fluid flow through the valve along on the sealing surface in 360 , which could eliminate the crash to the seat by the fluid in high speed, also flush away the dirties on the sealing surface.
Cast Steel Gate valves Glofa Supplied can be fully opened and fully closed to be used for cutting in the pipeline.The entire flow channel is a straight-through passage when the valve is fully-open, and the pressure loss is minimum.Gate valve is usually for working condition in which the valve is not opened or closed frequently, Itâ??s not suitable for adjustment or throttling. The most important feature of the cast steel gate valve of Glofa produced is that they can be ensured that the permissible leakage rate can be lower than that specified in API 6D and API 600, and the middle shaft sealing can pass the USA VOC leakage test. The wedged gate of the Glofaâ??s gate valve provides tight sealing even at low differential pressure. Grooved wedge guided and fitted by body, assures proper and consistent seal regardless of valve position, and also minimizes seat wear and damage, since seating surfaces of the wedge and seat are in contact during less than 5% of the total wedge travel.
Brass body,zinc handle,brass ball and stem,
Pneumatic Products.
Rail Opening Gauge JG-KC01 Rail opening gauge is mainly used for measuring turnout opening and offset gauge. It can be used for electrical maintenance, overhaul, engineering survey and other related department line operation.The instrument has fast measuring speed and easy to use. It can be used in day or night.
Cylinder Head Gasket 3161-0309 AH0501010512 AH0501010510 Gasket RGF1000-21-00 RGF1000-05.31 Sleeve 2 " Air bag is inflated hose assembly RGF1000-09 RGF1300-02.03 Flexible pipe 38 53 GB3452.1-82 RGF1000-23-09 Cylinder Head Oil Gathering Box 3161-0310-00 RGF800-05.02 RGF1000-05.12 Oil Gathering Box RGF1000-23-00 AH0501010521 Sleeve 2 3/8" RGF1300-02.04 RGF1300-10-00 RGF1300-02.04 90�°Elbow RGF1300-19.01.00 RGF1000-23-10 Cylinder liner sealing ring "Skeleton oil seal 9.125""X10.375""X0.625"" " 3161-0311 RGF1000-05.21 RGF1000-05.13.00 "Skeleton oil seal 9.125""X10.375""X0.625"" " RGF1300-02-02 RGF800-05.11 Sleeve 3 5/8" RGF1300-02.15 RGF1300-12-00 RGF1300-02.15 32PLCentrifugal spray pump RGF1000-12-01 RGF1000-23-11 Cylinder liner sealing ring BearingNU3044X3M 4G32844H 3161-0312 4G32844H AH0501010516 AH0501010511 BearingNU3044X3M 4G32844H RGF1600-01.02 RGF1000-05.32 Sleeve 1 1/2" RGF1300-02.16C RGF1300-02.16C Inside thread ball valve g1 " M39�?2-M39�?3�?135 RGF1000-23-12 Cylinder head plug Flange 3161-0313 RGF1000-05.25 RGF1000-05.14 Flange RGF1300-02-13 AH0000050300 Long sleeve RGF1300-02.17 RGF1000-18-01-00 RGF1300-02.17 O-ring�?165�?7 T57-2011 RGF1000-23-13 Cylinder head plug Crosshead 3161-0401 AH0501010506 RGF1000-05.16 Crosshead RGF1600-01.06 RGF800-05.07.00 Transition taper sleeve T52-6006K RGF1000-22-00 T52-6006K The filter assembly T58-1002 RGF1000-23-14 O-ring 75x5.3 Upper slide 3161-0402 RGF1000-05.06 AH0000020500 Upper slide RGF1300-02.10A.00 Manual hydraulic pump 70MPa Pressure sleeve T57-3005.0 T57-3005.0 Shell T58-5002 RGF1300-17-03-00 O-ring 97.5x3.55 Gasket unit 3161-0403-00 AH0501010517 RGF1000-05.17.00 Gasket unit RGF1600-01.05A.00 Hanging seat Bolt M24 160 T57-7003K Air release valve T57-7003K Double head bolt t53-4007 T53-1004 RGF1300-17-15-00 Discharge line Adjusting pad 3161-0404 RGF1000-05.26 T507-302.00 Adjusting pad RGF1300-03-02 RGF1300-04.01A Plug board extractor GB5780-86 Double scale pressure gaugeY-60 GB5780-86 Nut 1 M3 3 T512-1001 RGF1000-26-10-00 Discharge line Packing box 3161-0405 Sealing washer T57-3005.00 Packing box RGF1600-02.01A Adapter connector Short screw T52-6004K Angle stop valves T52-6004K Flange5 1/ 35MPa RGF1000-23-00 RGF1300-17-24-00 Discharge line Gasket 3161-0408 Rubber strip 25X10X4000 "Power end lubrication assembly " Gasket RGF1300-02-06 Bead flange Sleeve 2 " RGF1300-03.01 Backup ring RGF1300-03.01 Ring Gasket R44 RGF1300-03.01 RGF1000-26-01-00 Cylinder head seal ring Packing box end cover 3161-0409 Rubber strip 25X10X4880 "Power end lubrication assembly " Packing box end cover RGF1300-04.04 Piston assembly Sleeve 2 3/8"
Digital track gauge for railway switch geometry and cant measuring Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance through microelectronics, embedded and sensor technologies and OLED display screen. Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55â?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. 10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES
Stainless steel feeler gap gauge for rail measurement Stainless steel feeler gap gauge for rail measurement and hole and slot sizes . PRODUCT SPECIFICATIONS Type Stainless steel feeler gap gauge Stainless steel feeler gap gauge mm 118x4.2x12.5mm Measurement range 0.2-4.0mm Resolution 0.05mm Precision ±0.03
Platform gauge is usd for measuring the distance between the railway track center and the platform side and the height between the rail surface and platform plane.(Customizable)
Stainless steel feeler gap gauge for rail measurement Stainless steel feeler gap gauge for rail measurement and hole and slot sizes . PRODUCT SPECIFICATIONS Type Stainless steel feeler gap gauge Material Stainless steel feeler gap gauge Dimensions (L x W x H) (mm) 118x4.2x12.5mm Measurement range 0.2-4.0mm Resolution 0.05mm Precision ±0.03
Stainless steel feeler gap gauge for rail measurement Stainless steel feeler gap gauge for rail measurement and hole and slot sizes . PRODUCT SPECIFICATIONS Type Stainless steel feeler gap gauge Material Stainless steel feeler gap gauge Dimensions (L x W x H) (mm) 118x4.2x12.5mm Measurement range 0.2-4.0mm Resolution 0.05mm Precision �±0.03
Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Exhaust filter assembly AH0501011400 AH35004-11.00 Inner ring AH0501010204 AH35001-02.04 Exhaust filter assembly AH1001011900 AH33014-04.00 Inner ring AH0801010204 AH34001-02.04A Cross head assembly AH0501010400 AH35001-04.00 Inner ring AH1001010204 AH33001-02.04 Cross head assembly AH0801010400 AH34001-04.00 Outer ring AH050101020500 AH35001-02.05.00 Cross head assembly AH1001010400 AH1001010400 Outer ring AH080101020500 AH34001-05.00 Pinion shaft assembly AH0501010300 AH35001-03.00 Outer ring AH100101020500 AH33001-02.05.00 Pinion shaft assembly AH0801010300 AH34001-03.00 connecting rod AH0501010206 AH35001-02.06 Pinion shaft assembly AH1001010300 AH33001-03.00 connecting rod AH0801010206 AH34001-02.06 Crankshaft assembly AH0501010200 AH35001-02.00 connecting rod AH1001010206 AH33001-02.06 Crankshaft assembly AH0801010200 AH34001-03.00 Cylinder assembly AH050101050100 AH35001-05.01A.00 Crankshaft assembly AH1001010200 AH33001-02.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Cylinder head flange AH0501010502 AH35001-05.02 Power end lubrication assembly AH0801010600 AH34001-06C.00 Cylinder head flange AH1001010502 AH33001-05.02 Power end lubrication assembly AH1001010600 AH33001-06C.00 Cylinder head AH0501010503 AH35001-05.03A Spray pump assembly AH0501010800 AH35001-08B.00 Cylinder head AH1001010503 AH33001-05.03A Spray pump assembly AH0801010800 AH34001-08B.00 Cylinder liner sealing ring AH0501010504 AH35001-05.04 Spray pump assembly AH1001010800 AH33001-08C.00 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Random tool AH0501011500 AH35001-20.00A Cylinder head plug AH050101050500 AH35001-05.05A Random tool AH0801011400 AH34001-15.00A Cylinder head plug AH100101050500 AH33001-05.05A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09
Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Exhaust filter assembly AH0501011400 AH35004-11.00 Inner ring AH0501010204 AH35001-02.04 Exhaust filter assembly AH1001011900 AH33014-04.00 Inner ring AH0801010204 AH34001-02.04A Cross head assembly AH0501010400 AH35001-04.00 Inner ring AH1001010204 AH33001-02.04 Cross head assembly AH0801010400 AH34001-04.00 Outer ring AH050101020500 AH35001-02.05.00 Cross head assembly AH1001010400 AH1001010400 Outer ring AH080101020500 AH34001-05.00 Pinion shaft assembly AH0501010300 AH35001-03.00 Outer ring AH100101020500 AH33001-02.05.00 Pinion shaft assembly AH0801010300 AH34001-03.00 connecting rod AH0501010206 AH35001-02.06 Pinion shaft assembly AH1001010300 AH33001-03.00 connecting rod AH0801010206 AH34001-02.06 Crankshaft assembly AH0501010200 AH35001-02.00 connecting rod AH1001010206 AH33001-02.06 Crankshaft assembly AH0801010200 AH34001-03.00 Cylinder assembly AH050101050100 AH35001-05.01A.00 Crankshaft assembly AH1001010200 AH33001-02.00 Cylinder assembly AH100101050100 AH33001-05.01A.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Cylinder head flange AH0501010502 AH35001-05.02 Power end lubrication assembly AH0801010600 AH34001-06C.00 Cylinder head flange AH1001010502 AH33001-05.02 Power end lubrication assembly AH1001010600 AH33001-06C.00 Cylinder head AH0501010503 AH35001-05.03A Spray pump assembly AH0501010800 AH35001-08B.00 Cylinder head AH1001010503 AH33001-05.03A Spray pump assembly AH0801010800 AH34001-08B.00 Cylinder liner sealing ring AH0501010504 AH35001-05.04 Spray pump assembly AH1001010800 AH33001-08C.00 Cylinder liner sealing ring AH1001010504 AH33001-05.04 Random tool AH0501011500 AH35001-20.00A Cylinder head plug AH050101050500 AH35001-05.05A Random tool AH0801011400 AH34001-15.00A Cylinder head plug AH100101050500 AH33001-05.05A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09
Digital Track Gauge Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge and back to back distance through microelectronics, embedded and sensor technologies and OLED display screen. Features 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. 10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES Specification Model(1435mm) GJC-TJG1 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range(mm) -200~+200 Flangeway Clearance(mm) 20-107 Superelevation division value(mm) 0.10 Track gauge division value(mm) 0.1 Track gauge max indication error(mm) ±0.25 Superelevation error(mm) ±0.45 Application rail line railway speed less than 250km/h
Industrial valves like bleed valves, plug valves and gate valves.
Valves like butterfly valve, gate valve and rotary valve.
Valves like gate valve, globe valve and check valve.
Penstock, sluice gate.
Valves.
Valves like ball valves.
