WOOD BASED ACTIVATED CARBON Wood based activated carbon is produced from selected types of wood and sawdust. This type of carbon is produced by either steam or phosphoric acid activation. Most pores in wood based carbon are in the meso and macro pore region which is ideal for decolorization of liquids and water. Wood base carbon is primarily used in surface water and wastewater filters to remove organic impurities and to effectively remove larger molecular structures like MIB (2-Methylisoborneol) and Geosmin. Wood base phosphoric acid activation can yeild carbon with a very high surface area, ranging from 1500-2500 m2/g. The product is available in granular, pelletized, or powder forms.
Coconut shell-based activated carbons are the least dusty. Predominantly microporous, they are well-suited for organic chemical adsorption. Coconut shell-based carbon has the highest hardness compared to other types of activated carbons, which makes it the ideal carbon for water purification.
Regular Bituminous Coal Based Carbon U.S. Standard Sieve Size (Mesh Size) : 4x6/4x8/4x10/5x7/6x12/8x16/8x20/8x30/ 10x30/10x40/12x40/20x50 Iodine (mg/g) Minimum : 800/850/900/950/1000/1050/1100Â CCL4/CTC (%) Minimum : 50 / 55 / 60 / 65 / 70 / 75 / 80 / 85Â Apparent Density (g/cc) : 0.35 - 0.60 Abrasion (%) Minimum : 75 / 80 / 85 / 90 Hardness (%) Minimum : 80 / 85 / 90 / 95 Ash Content (%) Maximum : 8/9/10/11/12/13/14/15/16/17/18 Moisture (%) Maximum : 2 / 3 / 4 / 5 pH 0.3 / 0.5 / 1 / 1.5 / 2 / 2.5 / 3 / 5
Regular Granular Coconut Shell Carbon U.S. Standard Sieve Size (Mesh Size) : 4x8 / 6x12 / 8x16 / 8x30 / 12x40 / 20x50 Iodine (mg/g) Minimum : 800/850/900/950/1000/1050/1100/1150/ 1200/1250/1300 CCL4/CTC (%) Minimum : 50 / 55 / 60 / 65 / 70 / 75 / 80 Apparent Density (g/cc) : 0.40-0.54 Hardness (%) Minimum : 95 / 96 / 97 / 98 / 99 Surface Area (m2/g) : 850-1350 Ash Content (%) Maximum : 5 Moisture (%) Maximum : 5 pH : 8~10
Fine black carbon powder produced from tire pyrolysis 100% pure. Not treated can be used in plastic, ink, and Fuel.
Widely used in the purification and deodorization for the drink water,in the further(deep)treatment to the toxicity,COD,BOD,Cdonbacillus,etc for the industrial wastewater and municipal watewater,in the ultra water purification for the electronic &pharmaceutical industries.
The basic metal, Iron is alloyed with Carbon to make steel & has the effect to increasing the hardness and strength of iron, pure Iron cannot be hardened or strengthened by a heat treatment but the addition of carbon enables a wide range of Hardness and Strength.
Product Name Aminoguanidine carbonate Other name: Aminoguanidine hydrogen carbonate, Aminoguanidine bicarbonate English name: Aninoguanidine hicarbonate;Aninoguanidine hydrogen molecular formula: CH6N4H2CO3 CAS NO:2582-30-1 carbonate Constitutional formula: Appearance white or reddish color crystal powder Specifications APPEARANCE WHITE CRYSTAL CONTENT (DRYNESS) 99.0% MIN ACIDINSOLUBLE SUBSTANCES 0.02% MAX IGNITION RESIDUE 0.07%MAX LOSS ON DRYING 0.3% MAX CHLORIDE(CL) 0.01%% MAX SULPHATE ASH 0.009%MAX ASH 0.1%MAX IRON CONTENT 8ppm max Properties White or reddish color crystal powder, soft, almost not dissolve in water and alcohol, not steady when heat, break down gradually and change into red when temperature is higher than 45â?? and completely decompose at 166â??. Using it is mainly used in dyestuff industry for preparing 3-Amino-5-mercapto-1,2,4-triazole, synthesizing cationic red 2BL, cationic red X-GRL, composing medicine trapidil, methyl gag, pesticide Nitrovin and so on. It is also the synthesizing raw material of color film, plastic vesicant and primary explosive.
We are manufacturers of activated carbon and can supply all different grades of the same. we also manufacture acid activated carbon. For any requirement contact,
We are manufacturers of activated carbon and can supply all different grades of the same. we also manufacture acid activated carbon. For any requirement contact,
Rubber Carbon Black N330 N550 N660 for TIre Reinforcement 1. For the rubber carbon black, it is mainly used as the rubber auxiliary agent for tyre/tire or other rubber products. 2. Lower price over other suppliers based on same quality. Lower raw materials price makes your products more competitive in local market. 3. Sample is free for quality test.
PEEK450CA30 30% Carbon Fiber Filled Polymers Engineering Plastic for Tube Pipe, Sheet Plate, Rod Bar, Parts Fittings.
Activated Carbon derived from Coconut Shell OR Wood in all formats, sizes & shape.
[Product Name] Blood Clot Activator Powder [Main Component] Polymers, clotting factors,ect. [Grade] Blood Test Grade [Appearance] White, odorless Powder, easy to absorb moisture(dry powder) [Performance] Good Suspendsion [Purity] No Impurity And Fine Fineness [Specification] Plastic Bottle with sealed, 250g/Bottle Or 500g/Bottle [Promoting ability] The proper amount of this product at room temperature can quickly coagulate the blood sample. usage: For the preparation of the test tube without silicidation is not ideal: 1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and stirred to obtain a solution A. 2. 1.8 g of a water-soluble siliconizing agent and 15 ml of purified water were prepared to obtain a solution B. 3. Mix A and B to obtain 100 ml of the coagulation suspension and spray on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C). Preparation method for siliconization under test conditions: 1. 6 g of the coagulation powder was added to 85 ml of absolute ethanol and 15 ml of purified water, stirred uniformly, and sprayed on the inner wall of the test tube. It is recommended that the 3-5 ml tube spray dose is 20-25 ul, and the plastic tube is dried at 40-50 ° C (the glass tube is dried at 40-120 ° C). storage :sealed and avoid moisture Validity Period :three years
We offer powdered activated carbon (PAC) with particles smaller than 80 mesh size. Though ultimately we collaborate with you to select the appropriate activated carbon based on treatment goals, systems and variability of compounds to be removed, the adsorption qualities of PAC make it an ideal option
We offer granular activated carbon (GAC) with at least 90% of the particles greater than 80 mesh size Though ultimately we collaborate with you to select the appropriate activated carbon based on treatment goals, systems and variability of material to be removed, the adsorption qualities of GAC make it an ideal option
Activated Carbon Used in water fiteration , animal litter Product origin : India Minimum Order Size and Packgaing details : 25-10000Tons
We can supply Recarburizer/ Carbon Raiser/carburetant Recarburizer/ Carbon Raiser/carburetant are used in casting, cast iron, cast steel, and castings. There is a requirement for carbon. Therefore, as a name suggests, carbonizers are used to increase the carbon content in molten iron. For example, the common charge in smelting is pig iron, scrap, Back to the charge, the carbon content of the pig iron is high, so increasing the amount of scrap steel, reducing the amount of pig iron, and adding carbonizer can play a role in reducing the cost of castings. We can supply all spec. FC 80,FC 85,FC 90,FC 92,FC 93,FC 94 FC 95, FC 98 so on all grade. Packing as client demand.
Company profile: Ningxia Jinbaoxing activated carbon Co.,ltd is a profession manufacture of coal based activated carbon, includes pelleted activated carbon,granular activated carbon and powdered activated carbon, we have 5 sets SLP activation furnaces, 10 sets rotary carbonation furnaces. We have advanced technology and hold the concept of customer first. Believe us, we will provide you with high quality goods and service, hope we can establish good and long-term relationship. Product Application: coal based activated carbon, which use the anthracite for the raw material, made by the production process of crushing,carbonation and activation. Our activated carbon have the advantages of high hardness, developed pores, large specific surface area, and strong absorption. It can be used for removing organic materials and free chlorine in water treatment, and adsorbing harmful gases in the air. It is an excellent adsorbent for air adsorption, drinking water, sewage water, industrial waste water treatment and the chemical &biological protection. Specification of the pelleted activated carbon: Item Data Size(mm) 0.9, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 9.0 Iodine(mg/g) 300-1100mg/g Surface area(m2/g) 600-1150 Moisture(%)
Company profile: Ningxia Jinbaoxing activated carbon Co.,ltd is a profession manufacture of coal based activated carbon, includes pelleted activated carbon,granular activated carbon and powdered activated carbon, we have 5 sets SLP activation furnaces, 10 sets rotary carbonation furnaces. We have advanced technology and hold the concept of customer first. Believe us, we will provide you with high quality goods and service, hope we can establish good and long-term relationship. Product Application: coal based activated carbon, which use the anthracite for the raw material, made by the production process of crushing,carbonation and activation. Our activated carbon have the advantages of high hardness, developed pores, large specific surface area, and strong absorption. It can be used for removing organic materials and free chlorine in water treatment, and adsorbing harmful gases in the air. It is an excellent adsorbent for air adsorption, drinking water, sewage water, industrial waste water treatment and the chemical &biological protection. Specification of the pelleted activated carbon: Item Data Size(mm) 0.9, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 9.0 Iodine(mg/g) 300-1100mg/g Surface area(m2/g) 600-1150 Moisture(%)
